Nitrate leaching losses under Miscanthus grass planted on a silty clay loam soil

Abstract. Nitrate leaching under newly planted Miscanthus grass was measured for three years. The crop received either no fertilizer-N or an annual spring application of 60 kg or 120 kg N ha^-1. During three winters soil water was collected from porous cup probes installed 90 cm deep. Nitrate leaching was calculated from the mean drain flow recorded in two drain gauges multiplied by the mean nitrate-N concentration in the soil water solutions collected. In the first year soil water nitrate concentrations were high on all treatments and N losses were 154, 187 and 228 kg ha^-1 respectively on the unfertilized treatment and those that received 60 or 120 kg N ha^-1. Leaching losses in the second and third years were, in turn, 8, 24 and 87 kg ha^-1 and 3, 11 and 30 kg ha^-1 for the unfertilized treatment and for the 60 and 120 kg N ha^-1 treatments respectively. Leaching losses were closer to those recorded under extensively managed grassland than arable land. The large losses in the first year were probably due to the previous agricultural management at the site and excessive inputs of N on the fertilized plots. In the second and third year, lower drainage volumes may also have influenced losses. The results show that Miscanthus , once established, can lead to low levels of nitrate leaching and improved groundwater quality compared with growing arable crops.     

Determination of Young's modulus for spruce, fir and isotropic materials by the resonance flexure method with comparisons to static flexure and other dynamic methods

Summary Dynamic methods provide rapid and accurate means to determine Young's modulus, i.e. the modulus of elasticity, of wood. For dry, clear specimens of épicéa commun (Norway spruce, picea excelsa) and sapin pictiné (silver fir, abies amabilis) we present a comparison of results from tests by a resonance flexure method with results obtained from four-point static flexure tests. For a wide range of specimen size the resonance flexure method provides a simpler, more rapidly performed alternative to the classical static flexure method, giving Young's modulus values which are for the spruce and fir specimens of this study, nearly identical to those calculated from the static flexure tests. Results are also presented which show that a resonance longitudinal method yields higher values of Young's modulus and an ultrasonic method yields still higher values. We provide also a comparison of the four test methods applied to isotropic materials.The authors wish to thank Pierre Michel and André Perrin for preparing the test specimens and components of the test apparatus for this study     

A two-step modification treatment of solid wood by bulk modification and surface treatment

A combination of bulk and surface modification of wood could lead to a product that shows the advantages of both treatments. This study evaluates the penetration of melamine resin into acetylated and silylated cell walls and possible side effects of melamine impregnation on this bulk treatment in order to clarify the feasibility of a combination of the chosen bulk modification (acetylation or silylation) and surface treatments (hardening by melamine modification). UV microscopy confirmed that melamine resin penetrates into wood cell walls even after acetylation and silylation treatment. Energy dispersive X-ray analysis showed that the melamine treatment did not lead to substantial washing out of silyl groups with the silylation reagent used. The possibility of a combination of the selected bulk and surface modification methods is given.     

Adaptation of the LIGNUM model for simulations of growth and light response in Jack pine

LIGNUM is a whole tree model, developed for Pinus sylvestris in Finland, that combines tree metabolism with a realistic spatial distribution of morphological parts. We hypothesize that its general concepts, which include the pipe model, functional balance, yearly carbon budget, and a set of architectural growth rules, are applicable to all trees. Adaptation of the model to Pinus banksiana, a widespread species of economic importance in North America, is demonstrated.

Conversion of the model to Jack pine entailed finding new values for 16 physiological and morphological parameters, and three growth functions. Calibration of the LIGNUM Jack pine model for open grown trees up to 15 years of age was achieved by matching crown appearance and structural parameters (height, foliage biomass, aboveground biomass) with those of real trees. A sensitivity study indicated that uncertainty in the photosynthesis and respiration parameters will primarily cause changes to the net annual carbon gain, which can be corrected through calibration of the growth rate. The effect of a decrease in light level on height, biomass, total tree branch length, and productivity were simulated and compared with field data. Additional studies yielded insight into branch pruning, carbon allocation patterns, crown structure, and carbon stress. We discuss the value of the LIGNUM model as a tool for understanding tree growth and survival dynamics in natural and managed forests.     

Combined effect of wood moisture content,drill bit rotational speed and feed rate on drilling resistance measurements in Norway spruce (Picea abies (L.) Karst.)

ABSTRACT

An IML-RESI PD 400 drilling tool and a standard spade drill bit (IML System GmbH, Wiesloch, Germany) were used to study the combined effect of wood moisture content (MC), drill bit rotational speed and feed rate on drilling resistance (DR) and feeding force (FF). Tests were made with Norway spruce (Picea abies (L.) Karst.) conditioned in a normal climate (20°C/65% RH), at 20°C/95% RH, vacuum-pressure impregnated in water, and oven-dried. Rotational speeds and feed rates had an impact on feed rate per cutting edge for the major cutting edge of the drill bit which was used for correlation with DR and FF for various MC. Impact of MC on DR and FF depended on rotational speeds and feed rates of the drill bit. For feed rates per cutting edge less than 0.09?mm, DR was higher for water saturated (WS) specimens. Negligible differences between DR for various MC were found for feed rates per cutting edge between 0.09 and 0.15?mm. DR was higher at low MC for feed rates per cutting edge which were higher than 0.15?mm. FF extremely increased in conditioned (20°C/95% RH) and WS specimens at feed rates per cutting edge less than 0.1?mm.     

Laser ablation-combustion-GC-IRMS--a new method for online analysis of intra-annual variation of delta13C in tree rings

We present a new, rapid method for high-resolution online determination of delta13C in tree rings, combining laser ablation (LA), combustion (C), gas chromatography (GC) and isotope ratio mass spectrometry (IRMS) (LA-C-GC-IRMS). Sample material was extracted every 6 min with a UV-laser from a tree core, leaving 40-microm-wide holes. Ablated wood dust was combusted to CO2 at 700 degrees C, separated from other gases on a GC column and injected into an isotope ratio mass spectrometer after removal of water vapor. The measurements were calibrated against an internal and an external standard. The tree core remained intact and could be used for subsequent dendrochronological and dendrochemical analyses. Cores from two Scots pine trees (Pinus sylvestris spp. sibirica Lebed.) from central Siberia were sampled. Inter- and intra-annual patterns of delta13C in whole-wood and lignin-extracted cores were indistinguishable apart from a constant offset, suggesting that lignin extraction is unnecessary for our method. Comparison with the conventional method (microtome slicing, elemental analysis and IRMS) indicated high accuracy of the LA-C-GC-IRMS measurements. Patterns of delta13C along three parallel ablation lines on the same core showed high congruence. A conservative estimate of the precision was +/- 0.24 per thousand. Isotopic patterns of the two Scots pine trees were broadly similar, indicating a signal related to the forest stand's climate history. The maximum variation in delta13C over 22 years was about 5 per thousand, ranging from -27 to -22.3 per thousand. The most obvious pattern was a sharp decline in delta13C during latewood formation and a rapid increase with spring early growth. We conclude that the LA-C-GC-IRMS method will be useful in elucidating short-term climate effects on the delta13C signal in tree rings.     

Effect of type of oil and addition of delta-tocopherol on model flavor compound stability during storage

The objective of this study was to investigate approaches to protect selected flavor compounds from deterioration when stored in an oil matrix. An aroma compound model mixture was prepared in a medium-chain triglyceride (MCT) or sunflower oil (SfO) matrix and stored under either an ambient air or argon atmosphere containing, respectively, ca. 20 and <0.5% residual oxygen as controls or containing a natural antioxidant, delta-tocopherol (0.01%). Samples were analyzed by static headspace GC/FID to determine the stability over time of the compounds in mixture. It was found that the type of oil had the greatest effect (P < 0.01) on overall compound stability. A low-oxygen atmosphere also had a significant (P < 0.05) protective effect on the aroma compounds in both oils. The addition of delta-tocopherol generally offered little additional protection. No significant relationship could be determined between the oxidation of the lipid matrix and the loss of oxidation-sensitive thiol compounds.     

Facultative and obligate diapause phenotypes in populations of the European spruce bark beetle Ips typographus

The bark beetle Ips typographus is the most destructive insect pest in Norway spruce-dominated forests. Its potential to establish multiple generations per year (multivoltinism) is one major trait that makes this beetle a severe pest. Ips typographus enters diapause to adjust its life cycle to seasonally changing environments. Diapause is characterized by developmental and reproductive arrest; it prolongs generation time and thus affects voltinism. In I. typographus a facultative, photoperiod-regulated diapause in the adult stage has been described. In addition, the presence of an obligate, photoperiod-independent, diapause has been hypothesized. The diapause phenotype has important implications for I. typographus voltinism, as populations with obligate diapausing individuals would be univoltine. To test for the presence of different I. typographus diapause phenotypes, we exposed Central and Northern European individuals to a set of photoperiodic treatments. We used two ovarian traits (egg number and vitellarium size) that are associated with gonad development, to infer reproductive arrest and thus diapause. We found a distinct effect of photoperiod on ovarian development, with variable responses in Central and Northern European beetles. We observed obligate diapausing (independent of photoperiod) individuals in Northern Europe, and both facultative (photoperiod-regulated) as well as obligate diapausing individuals in Central Europe. Our results show within-species variation for diapause induction, an adaptation to match life cycles with seasonally fluctuating environmental conditions. As the diapause phenotype affects the potential number of generations per season, our data are the basis for assessing the risk of outbreaks of this destructive bark beetle.

     

The parasitoid Dolichogenidea gelechiidivoris eavesdrops on semiochemicals from its host Tuta absoluta and tomato

Journal of Pest Science - Semiochemicals such as herbivore-induced plant volatiles (HIPVs) and host chemicals serve as communication signals for parasitoids searching for oviposition sites. The...