Ridging in autumn as an alternative to mouldboard ploughing in a humid-temperate region

In the original ridge tillage system as practiced in the US Corn Belt, ridges are formed during the growing season. Several studies have documented that this can reduce leaching of nutrients and improve fertilizer efficiency. This study was conducted to determine whether ridges formed in autumn can be used as an alternative to ploughing to reduce N leaching during autumn and winter, and thereby increase growth and N uptake of a subsequent unfertilized crop. A factorial field experiment with tillage and residues as factors was conducted during 1998–2000. Tillage treatments were autumn ridging and ploughing. Residue treatments were stubble, stubble + straw and stubble + liquid manure in order to create a gradient of C/N ratios. From the time of harvest until planting of a subsequent barley crop (Hordeum vulgare L.), inorganic N was determined 11 times in 1998–1999 and 10 times in 1999–2000 in the 0–10, 10–30, 30–60 and 60–90 cm soil layers. Growth and N uptake of barley was quantified nine times in both 1999 and 2000. Barley grain and straw yields were determined. Ridging resulted in lower levels of inorganic N in the 30–90 cm soil layer in November and a significantly higher level of inorganic N in the 0–30 cm soil layer in late April, indicating reduced leaching and increased N availability for the subsequent crop. Ridging significantly increased growth, yield and N uptake of barley whereas incorporation of straw generally reduced growth, yield and N uptake. It is concluded that ridging in autumn has a N conserving effect, and it is suggested that the potential of ridging in autumn as an alternative to ploughing is further investigated in detailed studies of solute movement, N immobilization/mineralization and crop performance.     

Tolerance of genetically characterized <Emphasis Type="Italic">Folsomia candida</Emphasis> strains to phenmedipham exposure

Background, Aims, and Scope  The springtail Folsomia candida is a commonly used model species in ecotoxicological soil testing. The species reproduces parthenogenetically and, thus, laboratories use different clonal lineages. In this study, we investigated if genetic divergence between F. candida strains impacts the reaction to chemical stress and may thus affect the outcome of toxicity tests. Methods  In two exposure assays (life-cycle reproduction test and avoidance behaviour test), three laboratory strains of F. candida from Portugal (PTG), Spain (SPN) and Denmark (DNK) were exposed to different concentrations of the reference chemical phenmedipham. Genetic divergence among strains was estimated based on mitochondrial COI sequence data. Results  No significant differences between tolerance towards phenmedipham exposure were observed in a reproduction test. In contrast, one strain (SPN) showed a decreased susceptibility to phenmedipham compared to the other strains (PTG and DNK) in the avoidance assay. Discussion  A phylogenetic tree based on mitochondrial COI sequences revealed clear genetic differentiation between both ‘reaction types’. Thus, we found a potential lineage dependent stress reaction in avoidance behaviour towards the pesticide. Conclusions  Our findings have implications for the comparability of test results among laboratories. Reproduction tests seem to be more robust towards interclonal genetic differentiation than avoidance tests. Recommendations and Perspectives  We recommend the use of molecular tools for simple and cost effective genetic characterization of F. candida strains used in chemical avoidance tests. Closer investigations concerning the relation between genetic relatedness and chemical response will provide a more detailed and comprehensive picture on the role of intraspecific genetic differentiation in stress tolerance. ESS-Submission Editor: Prof. Dr. Henner Hollert (henner.hollert@bio5.rwth-aachen.de)     

Bacterial Diversity and Aerobic Biodegradation Potential in a BTEX-Contaminated Aquifer

In order to gain insight into the community structure and the biodegradative potential of bacteria residing in a BTEX-contaminated field site, with benzene as main pollutant, an investigation strategy with a variety of cultivation-independent and -dependent approaches was undertaken. Based on 16S ribosomal DNA sequence analysis, sampling stations in the center of the pollution plume were found to be dominated by a bacterial consortium affiliated with various members of the class of Proteobacteria and Firmicutes, including different sporulating and non-sporulating sulfate-reducing bacteria and members of the genus Geobacter. Non-polluted samples retrieved from outside the plume revealed several phylotypes which were also observed in the centre of the plume. Bacterial sequences retrieved from the fringe of the plume were dominated by several genera of beta Proteobacteria subclass which were not associated with other phylotypes obtained in this study. All sampling stations were tested positive for catechol 2,3-dioxygenase genes, indicating the presence of microorganisms with the genetic potential degrading aromatic compounds via the meta-cleavage pathway. The groundwater system at the down-gradient edge of the plume was characterized, in contrast to all other sampling stations in the center and outside the plume, by high numbers of cultivable bacteria and cultivable aerobic benzene and toluene degraders. These findings are also in accordance with the investigations based on fluorescent in situ hybridization (FISH) with rRNA-targeted oligonucleotide probes, suggesting the presence of an actively benzene degrading bacterial community of beta Proteobacteria at the fringe of the pollution plume.     

Bioavailability of triazine herbicides in a sandy soil profile

The bioavailability of atrazine was evaluated in a Danish soil profile (Drengsted) using a combination of soil sorption, transport and mineralisation methods as well as inoculation using Pseudomonas ADP. Sorption of atrazine decreased markedly with depth as indicated by K_d values of 5.2 l kg^-1 for the upper soil and 0.1 l kg^-1 for the subsoils. The transport of atrazine was evaluated using soil TLC plates and the resulting R_f values were 0.1 for the upper soil and 0.9 for the subsoil. Only a relatively small amount of atrazine leached through undisturbed soil columns taken from the upper 60 cm. Inoculating with Pseudomonas strain ADP (1᎒⁶ CFU g^-1 dry weight soil) revealed that the degradation of 0.01 ppm atrazine was fully completed (80% mineralisation) within 10 days in the subsoil, while it reached less than 15% in the upper soil. Over a period of 500 days, a total mineralisation of 37% of added atrazine in the upper soil was found (2 mg kg^-1 incubated at 20° C). However, in the subsurface soil where 0.02 mg kg^-1 of atrazine was incubated at 10°C, the degradation was slower, only reaching about 12%. Terbuthylazine mineralisation was found to be temperature-dependent and low (less than 5%) in the upper soil and very much lower in the subsoil. Desethylterbuthylazine was the most frequently found metabolite. Finally, Pseudomonas strain ADP inoculated into soils from different depths increased the mineralisation of terbuthylazine dramatically. Modelling using a "two-compartment model" indicated that desorption of terbuthylazine is the limiting step for its mineralisation.     

Dynamic water vapour sorption properties of wood treated with glutaraldehyde

The dynamic water vapour sorption properties of Scots pine (Pinus sylvestris L.) wood samples were studied to investigate the modifying effects of glutaraldehyde. Pine sapwood was treated with solutions of glutaraldehyde and a catalyst (magnesium chloride) to obtain weight per cent gains of 0.5, 8.6, 15.5, and 21.0%, respectively. The sorption behaviour of untreated and treated wood was measured using a Dynamic Vapour Sorption apparatus. The results showed considerable reduction in equilibrium moisture content of wood and the corresponding equilibrium time at each target relative humidity (RH) due to glutaraldehyde treatment. The moisture adsorption and desorption rates of modified and unmodified wood were generally faster in the low RH range (up to approximate 20%) than in the high range. Modification primarily reduced the adsorption and desorption rates over the high RH range of 20–95%. Glutaraldehyde modification resulted in a reduction in sorption hysteresis due to the loss of elasticity of cell walls.     

A manganese(IV)/iron(III) cofactor in Chlamydia trachomatis ribonucleotide reductase

In a conventional class I ribonucleotide reductase (RNR), a diiron(II/II) cofactor in the R2 subunit reacts with oxygen to produce a diiron(III/IV) intermediate, which generates a stable tyrosyl radical (Y*). The Y* reversibly oxidizes a cysteine residue in the R1 subunit to a cysteinyl radical (C*), which abstracts the 3'-hydrogen of the substrate to initiate its reduction. The RNR from Chlamydia trachomatis lacks the Y*, and it had been proposed that the diiron(III/IV) complex in R2 directly generates the C* in R1. By enzyme activity measurements and spectroscopic methods, we show that this RNR actually uses a previously unknown stable manganese(IV)/iron(III) cofactor for radical initiation.     

Associations between maternal milk protein genotypes with preweaning calf growth traits in beef cattle

The objectives of this study were to investigate milk casein polymorphisms in dams and to determine the impacts of maternal casein genotypes on growth traits of their sucking calves. Milk samples from 433 dams of the breeds German Angus (GA) and German Simmental (GS) were typed at the milk protein loci α _s1-casein (α_s1-CN), β-casein (β-CN), α _s2-casein (α_s2-CN), and κ-casein (κ-CN) via isoelectric focusing. Associations between casein genotypes in maternal milk with growth traits of their 1,872 calves were analyzed until the age of weaning using linear mixed models, considering either genotypes of individual casein loci (model 1) or composite α _s1-β-α _s2-κ-CN genotypes within the casein cluster (model 2). Besides environmental effects such as sex, age of the dam, and calving year-season, genetic effects (breed group and maternal and paternal effects) were considered in statistical models. The composite casein genotype BBǀA2A2ǀAAǀAB (order of genes on bovine chromosome 6: α _s1-ǀβ-ǀα _s2-ǀκ-CN) was associated with greater average daily weight gains (ADG) and heavier age-adjusted weaning weights (WW) of calves (P < 0.05). The effects of composite genotypes on birth weight of calves were similar (P > 0.05; model 2). With regard to individual casein loci, greater ADG and WW were observed for calves from dams with the genotypes κ-CN BB and α _s1-CN BB, respectively (P < 0.05; model 1). Age-adjusted WW was largest for calves from dams carrying the κ-CN genotype BB (215 kg) compared with calves representing the maternal AB and AA genotypes (both 204 kg). Results from the present study suggested selectable casein genotypes due to their nutritional value of milk (value in terms of offspring performances), offering new perspectives for breeding strategies in beef cattle to improve preweaning calf performance.     

Kettle holes reflect the biogeochemical characteristics of their catchment area and the intensity of the element-specific input

Journal of Soils and Sediments - Kettle holes are small inland water bodies known to be dominated by terrigenous material; however, the processes and structures that drive the enrichment and...     

Assessment of cardiac output measurement in dogs by transpulmonary pulse contour analysis

Objective – To determine if metatarsal artery pressure (COmet) is comparable to femoral artery pressure (COfem) as the input for transpulmonary pulse contour analysis (PiCCO) in anesthetized dogs, using the lithium dilution method (LiDCO) as a standard for cardiac output (CO) measurement. Design – Prospective randomized study. Setting – University research laboratory. Animals – Ten healthy purpose‐bred mixed breed dogs were anesthetized and instrumented to measure direct blood pressure, heart rate, arterial blood gases, and CO. Interventions – The CO was measured using LiDCO and PiCCO techniques. Animals had their right femoral and left distal metatarsal artery catheterized for proximal (COfem) and distal (COmet) PiCCO analysis, respectively. Measurements were obtained from each animal during low, normal, and high CO states by changing amount of inhalant anesthetics and heart rate. Measurements were converted to CO indexed to body weigh (CI_BW=CO/kg) for statistical analysis. Agreement was determined using Bland and Altman analysis and concordance correlation coefficients. Measurements and Main Results – Thirty paired measurements were taken. The LiDCO CI_BW (± SD) was 68.7 ± 30.3, 176.0 ± 53.0, and 211.1 ± 76.5 mL/kg/min during low, normal, and high CO states, respectively. There was a significant effect of CI_BW state on bias and relative bias with COmet (P<0.001 and P=0.003, respectively). Bias of the COmet method (± SD) was ?116.6 (70.5), 20.1(76.4), and 91.3 (92.0) mL/kg/min at low, normal, and high CI_BW, respectively. Bias of the COfem (± SD) was ?20.3 (19.0), 8.6 (70.9), and ?2.9 (83.0) mL/kg/min at low, normal, and high CI_BW, respectively. The mean relative bias for COfem was ?6.7 ± 44% (limits of agreements: ?81.2 to 67.9%). Conclusion – Compared with lithium dilution, the pulse contour analysis provides a good estimation of CO, but requires femoral artery catheterization in anesthetized dogs.