Potential diffusion of doramectin into a soil amended with female pig manure. A field experiment

Doramectin is a veterinary drug used as an antihelminthic and is excreted mainly in the feces as the nonmetabolized drug. This study investigated the time profile of doramectin excretion in pig feces and the potential transfer and persistence of doramectin in the soil when the pig manure is used as an organic amendment to the soil. The concentration of doramectin in feces peaked at 143.0 ng/g in the dry feces 4 days after treatment. On day 62, the drug was still detected in the pig feces. After the land application of pig manure, the maximum concentration of doramectin in soil (ppb level) was detected 6 days after treatment. Seven months after the manure application, traces of doramectin were detected in the soil from the surface to a depth of 90 cm. Successive applications of manure from pigs treated with doramectin in a specific area could produce an accumulation of this drug in the soil.     

Genetic parameter estimation and gene association analyses for meat quality traits in open-air free-range Iberian pigs

Meat quality of Iberian pigs is defined by the combination of their genetic characteristics and the particular production system. To carry out a genetic analysis of the main meat quality traits, we estimated their heritabilities, genetic correlations and the association effects of 32 selected SNPs of 12 candidate genes. A total of ten traits were measured in longissimus dorsi samples from 1,199 Iberian pigs fattened in the traditional free-range system: water holding capacity (thawing, cooking and centrifuge force water losses), instrumental colour (lightness L*, redness a* and yellowness b*), myoglobin content, shear force on cooked meat, and shear force and maximum compression force on dry-cured loin. Estimated heritability values were low to moderate (0.01 to 0.43) being the lowest for L* and the highest for cooking loss. Strong genetic correlations between water holding capacity traits (0.93 to 0.96) and between myoglobin content and a* (0.94) were observed. The association analyses revealed 19 SNPs significantly associated with different traits. Consistent and strong effects were observed between PRKAG3 SNPs (rs319678464G > C and rs330427832C > T), MYH3_rs81437544T > C, CASP3_rs319658214G > T and CTSL_rs332171512A > G and water losses. Also for CAPN1_rs81358667G > A and CASP3_rs319658214G > T and shear force. The SNPs mapping on PRKAG3 showed the highest effects on Minolta colour traits. Genotyping of these SNPs could be useful for the selection of Iberian young boars with similar estimated breeding values for productive traits.     

Accelerated Solvent Extraction and Pulsed Electric Fields for Valorization of Rainbow Trout (Oncorhynchus mykiss) and Sole (Dover sole) By-Products: Protein Content,Molecular Weight Distribution and Antioxidant Potential of the Extracts

Fishery by-products are rich in biologically active substances and the use of green and efficient extraction methods to recover these high-added-value compounds is of particular importance. In this study, head, skin and viscera of rainbow trout and sole were used as the target matrices and accelerated solvent extraction (ASE) (45–55 °C, 15 min, pH 5.2–6.8, 103.4 bars) and pulsed electric fields (PEF) (1–3 kV/cm, 123–300 kJ/kg, 15–24 h) were applied as extraction technologies. The results showed that ASE and PEF significantly increased the protein extract efficiency of the fish by-products (p < 0.05) by up to 80%. SDS-PAGE results showed that ASE and PEF treatments changed the molecular size distribution of the protein in the extracts, which was specifically expressed as the change in the area or number of bands between 5 and 250 kDa. The antioxidant capacity of the extracts was evaluated by oxygen radical absorbance capacity (ORAC) and total antioxidant capacity (ABTS) assays. The results showed that both ASE and PEF treatments significantly increased the antioxidant capacity of rainbow trout and sole skin and head extracts (p < 0.05). ASE and PEF extraction processes can be used as new technologies to extract high-added-value compounds from fish by-products.     

Nitrate uptake by Vicia faba L. Plants: A physiological approach 1

This study was conducted to obtain information on the properties of the nitrate (NO₃ ^‐) uptake system in Vicia faba. The results showed that in plants grown in the absence of NO₃ ^‐, they cannot absorb it upon initial exposure to this anion. When this plant makes contact with environmental NO₃ ^‐, NO₃ ^‐uptake by the roots is progressively induced. However, in NO₃ ^‐‐grown plants, the uptake system is yet induced so they had the ability to take up NO₃ ^‐ at high rates from the beginning. The Michaelis’ constant (K,_M) and maximum uptake rate (V_max) were estimated from measurements of NO₃ ^‐ depletion in the uptake medium. The apparent K_M value for net NO₃ ^‐ uptake in induced V. faba plants was 60 μM and the corresponding V_max 0.44 umol NO₃ ^‐ (g FW)^‐1 h^‐1. This last value was low compared with that of other species, while K_M is in the range for other higher plants. From the results of our experiments at low and high NO₃ ^‐ concentrations, we discuss the possibility of the existence of two NO₃ ^‐ uptake systems, one of a high affinity (functioning at low NO₃ ^‐concentrations) and another of low affinity (operative at high NO₃ ^‐ level in the medium).     

Assessing metal bioaccumulation from estuarine sediments: comparative experimental results for the polychaete Arenicola marina

Purpose

The purpose of this paper is to compare three approaches for providing information on the bioaccumulation potential of metals from contaminated sediments to the deposit-feeding polychaete Arenicola marina.

Materials and methods

We present metal (Ag, As, Cd, Cu, Pb and Zn) bioaccumulation results from field-collected sediments quantified through direct measurements of bioaccumulated concentrations in A. marina over a period of 30 days under controlled laboratory exposures and compare these results with bioaccumulated metal concentrations in field-collected organisms from the same sites of collection of the sediments used in the laboratory exposures. For the metals for which model parameters are available (Ag, As, Cd and Zn), we also compare these results with biodynamic model predictions. We considered three UK estuaries characterised by a well-reported history of trace metal contamination and bioavailability in addition to the (control) site of collection of the worms.

Results and discussion

The results from laboratory-exposed organisms showed that the standard 28-day exposure duration may be adequate to identify the potential for metal bioaccumulation in this polychaete at the sites considered here. However, the time course of bioaccumulated concentrations and the comparison with measured concentrations in field-collected worms show that a steady state has not been reached, confirming the need for extended exposure periods. The worms showed symptoms of stress in feeding and growth during the initial 10 days of exposure and subsequent partial recovery during the following 20 days, suggesting that stress was not always caused by sediment contamination but that it was likely associated with handling and acclimation. At this last stage of the exposure, a generalised biodynamic model was used to provide estimates of bioaccumulated metal concentrations and net accumulation rates in worms.

Conclusions

The results of this study highlight the number of factors that should be considered for the interpretation of bioaccumulated metal concentrations in A. marina under laboratory exposures for contaminated sediment assessment, factors that appear to be common to most deposit-feeding polychaetes. A general biodynamic model proved to be a cost-effective method for an initial estimation of the extent and pattern of metal bioaccumulation under specified exposure conditions.     

Comparison of hydroponic culture and culture in a peat/sand mixture and the influence of nutrient solution and plant density on seed potato yields

Summary Two culture systems for propagating first generation potatoes were compared; the traditional system used a peat/sand mixture with mineral fertilizer, and hydroponic culture used perlite and nutrient solution. Total production and the number of tubers obtained using the hydroponic system were significantly higher than using the traditional culture system. Tuber yields from in vitro plants and minitubers depended upon time of year. During the autumn/winter cycle yield from minitubers was double that from in vitro plants, whereas the reverse was true during the spring/summer cycle. Four hydroponic test cultures were carried out to study the influence of seed density. The number of tubers obtained increased significantly with seed density but there was no decrease in the number of large-diameter tubers.     

Application of a plant bioassay for the evaluation of ecotoxicological risks of heavy metals in sediments affected by mining activities

Purpose

The objective of this work was to evaluate the effectiveness of a plant bioassay (Phytotoxkit®) for screening ecotoxicological risks in sediments affected by mining activities.

Materials and methods

A total of 42 sediment samples affected by mining activities were studied, including 39 sediment samples from the Sierra Minera, Spain, an area affected by old extraction procedures, and three sediments from an area affected by opencast mining. These three samples were then mixed with limestone filler at 10, 20 and 30 %, providing nine stabilised samples. The total and soluble metal(loid) content (As, Cd, Cu, Fe, Pb and Zn) was determined in all samples, and the Phytotoxkit® bioassay was applied to determine the ecotoxicological effect of this procedure.

Results and discussion

The stabilised material had a neutral pH and low soluble metal(loid) concentration, similar to that of samples in which a natural attenuation process had taken place because of mixing with surrounding carbonate-rich materials. An ecotoxicological survey identified the low toxicity levels of the stabilised samples.

Conclusions

The applied bioassay is a good tool for screening metal(loid) contamination in areas affected by mining activities, since it provides information on both natural and simulated attenuation processes. The mixing of sediments with limestone filler could be applied to the remediation of zones affected by mining activities, because the toxicological effect on the tested organisms in the stabilised sediments was reduced significantly and the metal(loid) content was diminished.     

Linalool production from the leaves of Bursera aloexylon and its antimicrobial activity

The oil of the leaves of Bursera aloexylon was found to contain a high linalool level (96.7 %). The antimicrobial activity tests indicated that the oil was effective against Rhodococcus equi (0.60 mg/ml) and Staphylococcus epidermides (0.15 mg/ml).     

Polyphenolics and Antioxidant Capacity of White and Blue Corns Processed into Tortillas and Chips

White and blue corns of Mexican and American origins were lime-cooked to obtain nixtamals with optimal moisture (48–50%) for tortillas and chips. Blue kernels had less bulk density, softer endosperm and, consequently, required less cooking time than the white kernels. The optimum cooking regime for the white kernels was 100°C for 20 min, while the optimum for both pigmented genotypes was 90°C for 0 min (until the lime-cooking solution reached 90°C). Doughs, tortillas, and chips were characterized by total soluble phenolics (TSP), anthocyanins (ACN), and antioxidant capacity (AOX). A dough acidification procedure using fumaric acid (pH 5.2) was assessed as a means to improve TSP, ACN, and AOX retention. The Mexican blue corn had higher AOX (16%) than the American blue genotype, although the latter had a threefold higher TSP content (12.1 g/kg, dwb). Mexican and American blue corns had higher AOX capacity (29.6 and 25.6 μM trolox equivalents [TE]/g dwb), respectively, than the white corn (17.4 μM TE/g). White corns did not have detectable amounts of ACN, while blue Mexican and American kernels contained 342 and 261 mg/kg. Lime cooking had the greatest negative impact on the stability of TSP, ACN, and AOX. However, the acidification reduced ACN, TSP, and AOX losses by 8–23, 3–14, and 4–15%, respectively. Similar ACN losses were observed for both types of blue kernels when processed into nixtamal/dough (47%); however, ACN losses in tortillas and chips manufactured from the American blue genotype were higher (63 and 81%, respectively) than those of Mexican blue corn products (54 and 75%). ACN losses were highly correlated to TSP (r = 0.91) and AOX capacity losses (r = 0.94).     

Phenotypic and Genetic Diversity in Strains of Common Blight Bacteria (Xanthomonas campestris pv. phaseoli and X. campestris pv. phaseoli var. fuscans) in a Secondary Center of Diversity of the Common Bean Host Suggests Multiple Introduction Events

ABSTRACT Common bacterial blight (CBB) disease of the common bean (Phaseolus vulgaris) is caused by Xanthomonas campestris pv. phaseoli and the brown-pigmented variant X. campestris pv. phaseoli var. fuscans. CBB first was described in Castilla y León County, Spain, in 1940, and is now a major constraint on common bean production. In this secondary center of diversity of the common bean, large-seeded Andean cultivars predominate, although medium-seeded Middle American cultivars also are grown. Xanthomonad-like bacteria associated with CBB in Castilla y León were characterized on the basis of carbohydrate metabolism, brown pigment production, genetic analyses (repetitive-element polymerase chain reaction [rep-PCR] and random amplified polymorphic DNA [RAPD]) and pathogenicity on cultivars representing the two common bean gene pools (Andean and Middle American). X. campestris pv. phaseoli was more prevalent (80%) than X. campestris pv. phaseoli var. fuscans (20%). Patterns of carbohydrate metabolism of Spanish CBB bacteria were similar to those of known strains; and only X. campestris pv. phaseoli var. fuscans strains utilized mannitol as a sole carbon source. rep-PCR and RAPD analyses revealed relatively little genetic diversity among Spanish X. campestris pv. phaseoli strains, and these strains were placed together with New World strains into a large cluster. Similar to other New World strains, representative Spanish X. campestris pv. phaseoli strains were highly pathogenic on bean cultivars of both gene pools, showing no gene pool specialization such as that found in certain East African strains. Genetic analyses and pathogenicity tests confirmed and extended previous results, indicating that these East African strains represent distinct xanthomonads that independently evolved to be pathogenic on common bean. X. campestris pv. phaseoli var. fuscans strains were more closely related and genetically distinct from X. campestris pv. phaseoli strains. However, two distinct clusters of X. campestris pv. phaseoli var. fuscans strains were identified, one having the most New World strains and the other having the most African strains. Spanish strains were placed in both clusters, but all strains tested were highly pathogenic on bean cultivars of both gene pools. Together, our results are consistent with multiple introductions of CBB bacteria into Spain. These findings are discussed in terms of breeding for CBB resistance and the overall understanding of the genetic diversity and evolution of CBB bacteria.