Analysis of a site x year experiment with timothy polycross progeny

Summary Results from a cooperative breeding programme with timothy for the northern areas of Scandinavia are presented. The main aim of the programme was to identify genotypes for synthetic populations that are high yielding, adapted over the whole area and stable over years. A polycross comprising 12 genotypes from each of five sites within the region was formed. The subsequent 60 half-sib families and four reference varieties were then compared under sward conditions at the same sites. The trials lasted for three years and results for total dry matter yields are presented.Significant differences in yield between lines were found. There were also significant two and three factor interactions between lines, sites and years. A new two-step procedure is presented to select the genotypes to make up a synthetic variety. Firstly, a superiority measure (Q-value) is used to select a group of genotypes that are high yielding and stable over sites and years. Secondly, the GxE part of the Q-value is split into two terms. One measures adaptation to predictable environmental conditions. The other one measures stability to unpredictable changes in the environment. A plot of these two measures provides a tool for discarding unstable or poorly adapted genotypes. The statistical properties of the selection parameters are discussed.     

Effects of a plastic cover on soil moisture change in a Mediterranean climatic regime

Water deficit is a serious problem for most agricultural crops, especially in arid–semiarid regions, and limits sustainable development. Production can be improved by reducing evapotranspiration and loss of infiltrated water by the use of a plastic cover. We monitored soil moisture fortnightly over 1 yr using a neutron probe near four trees in an olive grove (Olea europaea, var. Arbequina), two of which had a plastic cover buried in the topsoil around them. These trees were monitored using three neutron probe access tubes per tree to compare the behaviour of soil moisture over time with two other identically instrumented and nearby trees with no cover. Analysis was based on the resultant moisture profiles. The plastic cover retained moisture and increased soil water residence time. During the dry season, the amount of water retained in the plots was at most 15–20% greater in the mid‐season and at least 5–6% greater at the end of season than in the central part of the plots near the trunk. The plastic cover was effective to ca. 50 cm with maximum water content near the soil surface. During the wet season, the cover did not affect soil water. Soil moisture was greater near the tree trunk as a result of stemflow and throughfall.     

Injection molding of vertebral fixed cage implant

A vertebral cage is a hollow medical device which is used in spine surgery. By implanting the cage into the spine column, it is possible to restore disc and relieve pressure on the nerve roots. Most cages have been made of titanium alloys but they detract the biocompatibility. Currently PEEK (polyether ether ketone) is applied to various implants because it has good properties like heat resistance, chemical resistance, strength, and especially biocompatibility. A new shape of vertebral cage is designed and injection molding of PEEK is considered for production. Before injection molding of the cage, it is needed to evaluate process conditions and properties of the final product. Variables affecting the shrinkage of the cage are considered, e.g., injection time, packing pressure, mold temperature, and melt temperature. By using the numerical simulation program, MOLDFLOW, several cases are studied. Data files obtained by MOLDFLOW analysis are used for stress analysis with ABAQUS, and shrinkage and residual stress fields are predicted. With these results, optimum process conditions are determined.     

Response of Thawed Epidi dymal Red Deer Spermatozoa to Increasing Concentrations of Hydrogen Peroxide,and Importance of Individual Male Variability

Oxidative stress represents a challenge during sperm manipulation. We have tested the effect of increasing hydrogen peroxide (H₂O₂) levels on red deer spermatozoa after cryopreservation, and the role of male‐to‐male variation in that response. In a first experiment, eight thawed samples were submitted to 0, 25, 50, 100 and 200 μm H₂O₂ for 2 h at 37°C. Intracellular reactive oxygen species (H₂DCFDA‐CM) increased with H₂O₂ concentration, but we only detected a decrease in sperm function (motility by CASA and chromatin damage by sperm chromatin structure assay) with 200 μm . Lipoperoxidation assessed by the thiobarbituric acid reactive substance (TBARS) method increased slightly with 50 μm H₂O₂ and above. In a second experiment, samples from seven males were submitted to 0 and 200 μm H₂O₂ for 2 h, triplicating the experiment within each male. Males differed at thawing and regarding their response to incubation and H₂O₂ presence. We found that the kinematic parameters reflected male‐to‐male variability, whereas the response of the different males was similar for lipid peroxidation and viability. A multiparametric analysis showed that males grouped differently if samples were assessed after thawing, after incubation without H₂O₂ or after incubation with H₂O₂. Red deer spermatozoa are relatively resilient to H₂O₂ after thawing, but it seems to be a great male‐to‐male variability regarding the response to oxidative stress. The acknowledgement of this individual variability might improve the development of optimized sperm work protocols.     

Bioprospection of Microalgae and Cyanobacteria as Biocontrol Agents Against Vibrio campbellii and Their Use in White Shrimp Litopenaeus vannamei Culture

Vibrio spp. are the most common and harmful shrimp pathogenic bacteria; however, microalgae and cyanobacteria have the ability to produce antimicrobial substances against these species. In this study, the organic and aqueous extracts of 28 species of marine microalgae and cyanobacteria were screened against Vibrio campbellii M1. Two of these phytoplankton species with antibacterial activity in aqueous extracts (Dunaliella tertiolecta and Skeletonema costatum) and nontoxic to brine shrimp Artemia franciscana nauplii were used to evaluate their anti‐Vibrio effect when used as green‐water cultures in Vibrio‐challenged white shrimp Litopenaeus vannamei cultures. No differences in mortality of juvenile L. vannamei were observed between treatments tested, suggesting that the pathogenicity of V. campbellii could be related to the growth stage of shrimp. The proximal composition of D. tertiolecta and S. costatum was in the recommended range for penaeid shrimp nutrition, allowing shrimp supplemented with these microalgae to have significantly greater total length and weight than control shrimp. Shrimp supplemented with S. costatum presented the highest values of organic mass (11.48 mg/organism) and growth rate (0.31 mg/d) in comparison to D. tertiolecta. These results indicate that microalgae are not only capable of producing antibacterial compounds against Vibrio but can also help shrimp nutrition.     

Species proportions by area in mixtures of Scots pine (<Emphasis Type="Italic">Pinus sylvestris</Emphasis> L.) and European beech (<Emphasis Type="Italic">Fagus sylvatica</Emphasis> L.)

Scots pine (Pinus sylvestris L.) and European beech (Fagus sylvatica L.) dominate many of the European forest stands. Also, mixtures of European beech and Scots pine more or less occur over all European countries, but have been scarcely investigated. The area occupied by each species is of high relevance, especially for growth evaluation and comparison of different species in mixed and monospecific stands. Thus, we studied different methods to describe species proportions and their definition as proportion by area. 25 triplets consisting of mixed and monospecific stands were established across Europe ranging from Lithuania to Spain in northern to southern direction and from Bulgaria to Belgium in eastern to western direction. On stand level, the conclusive method for estimating the species proportion as a fraction of the stand area relates the observed density (tree number or basal area) to its potential. This stand-level estimation makes use of the potential from comparable neighboring monospecific stands or from maximum density lines derived from other data, e.g. forest inventories or permanent observations plots. At tree level, the fraction of the stand area occupied by a species can be derived from the proportions of their crown projection area or of their leaf area. The estimates of the potentials obtained from neighboring monospecific stands, especially in older stands, were poorer than those from the maximum density line depending on the Martonne aridity index. Therefore, the stand-level method in combination with the Martonne aridity index for potential densities can be highly recommended. The species’ proportions estimated with this method are best approximated by the proportions of the species’ leaf areas. In forest practice, the most commonly applied method is an ocular estimation of the proportions by crown projection area. Even though the proportions of pine were calculated here by measuring crown projection areas in the field, we found this method to underestimate the proportion by 25% compared to the stand-level approach.     

Genetic diversity of the myrtle rust pathogen (Austropuccinia psidii) in the Americas and Hawaii: Global implications for invasive threat assessments

Since the myrtle rust pathogen (Austropuccinia psidii) was first reported (as Puccinia psidii) in Brazil on guava (Psidium guajava) in 1884, it has been found infecting diverse myrtaceous species. Because A. psidii has recently spread rapidly worldwide with an extensive host range, genetic and genotypic diversities were evaluated within and among A. psidii populations in its putative native range and other areas of myrtle rust emergence in the Americas and Hawaii. Microsatellite markers revealed several unique multilocus genotypes (MLGs), which grouped isolates into nine distinct genetic clusters [C1–C9 comprising C1: from diverse hosts from Costa Rica, Jamaica, Mexico, Puerto Rico, and USA‐Hawaii, and USA‐California; C2: from eucalypts (Eucalyptus spp.) in Brazil/Uruguay and rose apple (Syzygium jambos) in Brazil; C3: from eucalypts in Brazil; C4: from diverse hosts in USA‐Florida; C5: from Java plum (Syzygium cumini) in Brazil; C6: from guava and Brazilian guava (Psidium guineense) in Brazil; C7: from pitanga (Eugenia uniflora) in Brazil; C8: from allspice (Pimenta dioica) in Jamaica and sweet flower (Myrrhinium atropurpureum) in Uruguay; C9: from jabuticaba (Myrciaria cauliflora) in Brazil]. The C1 cluster, which included a single MLG infecting diverse host in many geographic regions, and the closely related C4 cluster are considered as a “Pandemic biotype,” associated with myrtle rust emergence in Central America, the Caribbean, USA‐Florida, USA‐Hawaii, Australia, China‐Hainan, New Caledonia, Indonesia and Colombia. Based on 19 bioclimatic variables and documented occurrences of A. psidii contrasted with reduced sets of specific genetic clusters (subnetworks, considered as biotypes), maximum entropy bioclimatic modelling was used to predict geographic locations with suitable climate for A. psidii which are at risk from invasion. The genetic diversity of A. psidii throughout the Americas and Hawaii demonstrates the importance of recognizing biotypes when assessing the invasive threats posed by A. psidii around the globe.     

Serobiotypes and virulence genes of Escherichia coli strains isolated from diarrheic and healthy rabbits in Brazil

A total of 178 Escherichia coli isolates from diarrheic and healthy rabbits in the S?o Paulo State (Brazil) were serobiotyped and investigated by PCR for the presence of virulence genes. Among the 90 (50.6%) isolates which possessed the eae gene, 74 were from diarrheic animals and all but one encoded intimin beta. Sixty five (72.2%) of the eae+ isolates had insertion of the locus of enterocyte effacement locus in the pheU locus, 11 (12.2%) in the selC and 14 (15.6%) did not insert in either of these loci. All isolates were negative for genes of the E. coli enterotoxins, Stx1, Stx2, CNF1, CNF2 and EHEC hemolysin. The O132:H2 serotype was dominant, being present in 63 isolates (70%) of the 90 eae+ isolates, and 57 of the 63 isolates of this serotype belonged to biotype 30. PCR detected the gene for AF/R2 fimbriae in 75 (83.3%) of the 90 eae+ isolates. Adherence to HeLa cells was best detected following 6h incubation and a positive fluorescence actin staining (FAS) test was given by 52 isolates. These data show that isolates of E. coli associated with diarrhea in rabbits in Brazil possess the genotype and phenotype typically associated with rabbit enteropathogenic E. coli (EPEC). We conclude that EPEC that possess the eae gene are a common cause of diarrhea in Brazilian rabbit farms and that the pathogenic eae+ AF/R2+ isolates of O132:H2:B30 serobiotype are especially predominant.     

Influence of the species and geographical location on volatile composition of Spanish oak wood (Quercus petraea Liebl. and Quercus robur L.)

The influence of the species and geographical origin on the volatile composition of wood samples from 80 Spanish oaks (55 Quercus petraea Liebl. and 25 Quercus robur L.) has been studied. Oak volatile components were isolated by simultaneous distillation-extraction and analyzed by gas chromatography-mass spectrometry. cis- and trans-beta-methyl-gamma-octalactones were the main constituents, the cis stereoisomer being predominant. Other important volatile components were furfural, 5-methylfurfural, guaiacol, eugenol, vanillin, or syringaldehyde. The main differences were established between species, Quercus petraea being significantly richer in volatile compounds than Quercus robur; however, the variability found among trees was high. Differences among geographical provenances were much less important than those found between species.     

Flowering estimation in apple orchards by image analysis

Tree-specific management practice related to individual tree physiological condition is necessary for higher quality and quantity in apple fruit production. Detection of apple flowering abundance based on analysis of HSL (hue, saturation, luminance) images was used to estimate the number of flower clusters (FC) of individual trees in a high density apple orchard. The image acquisition was performed with a still camera and an industrial color camera during the day and night. The FC estimation algorithm included HSL thresholding with parameter optimization. Three hypothetical, tree-specific management practices (sprayings) were assumed, using >25, >50 and >100 FC thresholds to carry out the practice. When an industrial camera was used for image acquisition during the daytime and hypothetical spraying was done by on/off criterion >100 FC per tree, 10 % incorrect executions were identified. Comparable FC counting performance was achieved by using a still camera or an industrial camera.