The use of the first industrial X-ray CT scanner increases the lumber recovery value: case study on visually strength-graded Douglas-fir timber

Key message

Industrial computed tomography scanning of logs provides detailed information on timber quality prior to sawing. A sawing simulation—considering log rotation angle and knot size accuracy—revealed an average value increase of up to 20% for the best angle compared to the conventional horns-up position.

Context

Computed tomography (CT) scanning has the potential to improve the value of products sawn from logs and meets the increasing demands of the wood industry for detailed information on log quality prior to processing.

Aims

In a validation step, automated measurements of knot cluster variable DAB (DIN 4074-1:2012-06) using CT were compared with manual measurements. In a second optimization step, the hypothesis that the value of the sawn products is increased by sawing at the best rotation angle as opposed to the horns-up position was tested.

Methods

A sample of 36 Douglas-fir logs were scanned in an industrial CT scanner, and sawn into boards. Knots on the boards were manually measured, and compared with the corresponding knots on virtual boards created from the CT data. The error of the DAB was measured by comparing CT data to manual measurements. An optimized sawing simulation was performed, using the measured DAB error to account for CT measurement errors, as well as a rotational error to account for errors in the log turning equipment. Using the results of the sawing simulation, Monte Carlo simulations were performed to show the potential and benefit of an industrial CT scanner.

Results

The three largest DABs measured by the CT showed good correlation to the measurements on the manual boards. The simulation revealed an average increase of value from 4 to 20% compared to the conventional horns-up position depending on the relative price differences between the strength grades.

Conclusion

By using a CT scanner to optimize sawing, sawmill owners can process logs in a better way to produce final products with increased added value.

     

Sterile insect technique and <Emphasis Type="Italic">Wolbachia</Emphasis> symbiosis as potential tools for the control of the invasive species <Emphasis Type="Italic">Drosophila suzukii</Emphasis>

Drosophila suzukii, a vinegar fly originated from Southeast Asia, has recently invaded western countries, and it has been recognized as an important threat of a wide variety of several commercial soft fruits. This review summarizes the current information about the biology and dispersal of D. suzukii and discusses the current status and prospects of control methods for the management of this pest. We highlight current knowledge and ongoing research on innovative environmental-friendly control methods with emphasis on the sterile insect technique (SIT) and the incompatible insect technique (IIT). SIT has been successfully used for the containment, suppression or even eradication of populations of insect pests. IIT has been proposed as a stand-alone tool or in conjunction with SIT for insect pest control. The principles of SIT and IIT are reviewed, and the potential value of each approach in the management of D. suzukii is analyzed. We thoroughly address the challenges of SIT and IIT, and we propose the use of SIT as a component of an area-wide integrated pest management approach to suppress D. suzukii populations. As a contingency plan, we suggest a promising alternative avenue through the combination of these two techniques, SIT/IIT, which has been developed and is currently being tested in open-field trials against Aedes mosquito populations. All the potential limiting factors that may render these methods ineffective, as well as the requirements that need to be fulfilled before their application, are discussed.     

Weaning of the wedge sole <Emphasis Type="Italic">Dicologoglossa cuneata</Emphasis> (Moreau): influence of initial size on survival and growth

The weaning phase can be decisive in fish-culture viability. In this work, the relationship between the initial size and weaning success has been studied in wedge sole (Dicologoglossa cuneata). For each age (30, 50, and 70 days after hatching, DAH), two to three sizes were selected, and all were put on the same feeding schedule for 20 days. Each batch (three replicates) was sampled at 1, 10, and 20 days. Specific growth rate (SGR) and survival were compared at the end of the co-feeding period, after 10 days on dry feed only. The best results for survival and growth were found with the smallest larvae, and vice versa. The SGRs and survival rates recorded during the co-feeding period were higher (0.8–15.6 day⁻¹ and 68.3–97.8%) than those from the dry-food phase (0.9–4.7 day⁻¹ and 56.3–66.7%). Successful weaning (survival = 65% and SGR = 9.3 day⁻¹) is possible with 30 DAH larvae (7.6–8.1 mm and 3.9–4.6 mg). In conclusion, the most effective weaning would be possible at 30 DAH, implying significant Artemia savings (25–50%).     

‘尧麦16’选育过程中白粉病抗性与产量相关性研究

研究小麦品种选育过程中白粉病和产量之间的互作关系,为育种家在品种选育过程中相关品系的取舍提供参考。在国审品种‘尧麦16’选育过程中,该家系出现不同白粉病抗性和产量的品系。利用白粉抗性不同的‘尧麦16’家系及衍生品系为材料,比较材料间白粉病抗性与产量的差异。4个高代品系的产量三要素差异不显著,但小区产量随着抗白粉程度的降低逐渐提高,较抗病RI16-1依次提高13.2%、16.5%和23.9%。高感RI16-4的衍生品系白粉病反应型略有差异,RI16-4-1和RI16-4-2为3级,RI16-4-3、RI16-4-4、RI16-4-5、RI16-4-6、RI16-4-7和RI16-4-8均为4级;RI16-1的5个衍生平均产量为4.75 kg,而RI16-4高感白粉的6个衍生品系较RI16-1的衍生品系平均增产11.16%,平均产量为5.28 kg,感白粉的衍生品系普遍超过抗白粉衍生品系的产量。综合两年度各品系性状可以看出随着白粉病抗性的降低,不同衍生品系的小区产量随之提高。此外,小区产量整体上呈现产量水平与抗病性具有负相关的趋势。     

La/P/Ni改性分子筛催化裂解生物油模型化合物

为研究不同分子筛催化剂对生物油催化裂解特性的影响,该文采用稀土元素La、非金属元素P以及活泼金属元素Ni对ZSM-5分子筛催化剂进行改性,在连续式固定床反应器中对乙酸乙酯、二丙酮醇、糠醛和愈创木酚等生物油模型化合物进行催化裂解试验,进而对比HY、HZSM-5、ZSM-5催化剂以及改性后ZSM-5催化剂对模型化合物的催化裂解反应特性以及脱氧效果。试验结果表明:在反应温度为400℃、反应质量空速为4/h条件下,经La/P/Ni改性ZSM-5分子筛催化剂,模型化合物有机相收率提高,结焦率下降;HY分子筛所得有机相收率最低,结焦率最高。模型化合物各组分裂解难易程度由易到难为二丙酮醇乙酸乙酯糠醛愈创木酚;改性后ZSM-5分子筛使组分单一转化率和总转化率均出现下降;HZSM-5分子筛作用下,反应转化率达到最高。模型化合物催化裂解脱氧产物以芳香烃为主,经La改性ZSM-5分子筛作用后,其芳香烃选择性较ZSM-5略微上升;P和Ni改性后,芳烃选择性下降;HZSM-5对于芳香烃选择性最高,达7.36%;HY对于芳香烃选择性最低,仅为3.15%。通过液体产物组分分析进一步探讨模型化合物反应路径,从而为生物油的催化裂解提供一定的理论基础和科学依据。     

Phytotoxin produced by the netted scab pathogen, <Emphasis Type="Italic">Streptomyces turgidiscabies</Emphasis> strain 65, isolated in Sweden

Streptomyces spp. are a highly diverse group of bacteria most of which are soil-inhabiting saprophytes. A few are plant pathogens that produce a family of phytotoxins called thaxtomins and cause significant economic losses, e.g., by reducing the marketability of potato tubers (Solanum tuberosum). In northern Europe, S. scabies, S. turgidiscabies and S. europaeiscabiei are the most common plant pathogenic species. In this study, a Streptomyces strain isolated from a netted scab lesion on a tuber of potato cv. Bintje in northern Sweden was identified as S. turgidiscabies but was found to differ in the genomic region carrying genes required for thaxtomin biosynthesis. Our results showed that the strain did not produce thaxtomin but rather phytotoxin fridamycin E, which is an anthraquinone novel to plant pathogenic Streptomyces spp. Fridamycin E was shown to reduce or inhibit sprouting of potato microtubers in vitro. While fridamycin E is known to have antibiotic activity against Gram-positive bacteria, the inhibitory activity of fridamycin E on plant growth is a novel finding.     

Genetic variation in F<Subscript>2</Subscript> populations and their potential in the improvement of grain yield in tef (<Emphasis Type="Italic">Eragrostis tef</Emphasis>)

Tef is a staple cereal of Ethiopia in high demand by consumers. In order to cope up with this high consumer demand, productivity per unit of land must increase through the development and use of high-yielding varieties. To this effect, the National Tef Research Project has long been striving towards the development of high yielding varieties through direct selection from germplasm and concentrating favourable alleles through hybridization and selection, despite the tedious crossing technique. The objective of this study was to assess the degree of genetic variation in F₂ populations of tef as a basis for improving grain yield. F₂ populations from 12 crosses and their parents were grown at the Debre Zeit Agricultural Research Center, Ethiopia, and assessment was made on eight traits on individual plant basis. Eleven of the 12 crosses showed substantial genetic variation for grain yield and its components, indicating the potential for improvement through selection. Moreover, grain yield, plant weight and yield related traits showed moderate to high heritability values (17–80%). In all the crosses, tiller number, panicle weight, yield per panicle and panicle length showed significant (P ≤ 0.05) and positive association with grain yield. Considering the degree of genetic variation and heritability values, emphasis should be given to selected crosses in an effort to developing high-yielding tef varieties.     

Gas exchange responses of <Emphasis Type="Italic">Eucalyptus</Emphasis>, <Emphasis Type="Italic">C. africana</Emphasis> and <Emphasis Type="Italic">G. robusta</Emphasis> to varying soil moisture content in semi-arid (Thika) Kenya

A dramatic decline in forest cover in eastern Africa along with a growing population means that timber and poles for building and fuelwood are in short supply. To overcome this shortage, the region is increasingly turning to eucalyptus. But eucalyptus raises environmental concerns of its own. Fears that it will deplete water supply, affect wildlife and reduce associated crop yields have caused many countries in the region to discourage farmers from planting this exotic. This paper is part of a series of investigations on the growth and water use efficiency of faster growing eucalyptus hybrids, which was introduced from South Africa to Kenya. The hypothesis is that the new hybrids are more efficient in using water and more suitable for the semi-arid tropics than existing eucalyptus and two popular agroforestry species. Gas exchange characteristics of juvenile Eucalyptus grandis (W. Hill ex Maiden), two eucalyptus hybrids (E. grandis × Eucalyptus camaldulensis Dehnh.), Grevillea robusta (A. Cunn) and Cordia africana (Lam) was studied under field and pot conditions using an infrared gas analyzer was used to measure photosynthetic active radiation (PAR), net photosynthetic rate (A), stomatal conductance (g _s) and transpiration rate (E) at CO₂ concentrations of 360 μmol mol⁻¹ and ambient humidity and temperature. A, E and g _s varied between species, being highest in eucalyptus hybrid GC 15 (24.6 μmol m⁻² s⁻¹) compared to eucalyptus hybrid GC 584 (21.0 μmol m⁻² s⁻¹), E. grandis (19.2 μmol m⁻² s⁻¹), C. africana (17.7 μmol m⁻² s⁻¹) and G. robusta (11.1 μmol m⁻² s⁻¹). C. africana exhibited high E values (7.0 mmol m⁻² s⁻¹) at optimal soil moisture contents than G. robusta (3.9 mmol m⁻² s⁻¹) and eucalyptus (5.3 mmol m⁻² s⁻¹) in field experiment and G. robusta (3.2 mmol m⁻² s⁻¹) and eucalyptus (4.2 mmol m⁻² s⁻¹) in pot-grown trees. At very low soil moisture content, extremely small g _s values were recorded in GC 15 and E. grandis (8 mmol m⁻² s⁻¹) and G. robusta (14 mmol m⁻² s⁻¹) compared to GC 584 (46.9 mmol m⁻² s⁻¹) and C. africana (90.0 mmol m⁻² s⁻¹) indicating strong stomatal control by the species. Instantaneous water use efficiency ranged between 3 and 5 μmol mmol⁻¹ and generally decreased with decline in soil moisture in pot-grown trees but increased with declining soil moisture in field-grown trees.     

Productive efficiency of the sandfish <Emphasis Type="Italic">Arctoscopus japonicus</Emphasis> coastal gillnet fishery using stochastic frontier analysis

It is important to estimate the productive efficiencies of industries, especially the fishing industry, in order to determine policies that can improve business conditions. In this study, the productive efficiency of the sandfish coastal gillnet fishery on the east coast of Korea has been estimated using stochastic frontier analysis (SFA). A translog production function wherein the inefficiency was represented by a truncated-normal distribution was established; the output variable was the trip production quantity, the input variables were physical production factors directly related to the fishing activities of vessels, such as tonnage, horsepower, and the number of employed fishers. The average productive efficiency of the sample was 0.59 [0.40–0.79], which implied that productive inefficiency occurs in sandfish coastal gillnet vessels. Moreover, it was verified that there are no differences among the average productive efficiencies of fishing vessels of different tonnages.