Influence of the Flood-Control-Projects on the Hydrodynamic State of the Rivers Confluence in Chongqing

Though the Flood-Control-Projects along Yantze River and Jialing River in Chongqing may well improve the urban traffic and construction,it may change the river hydrodynamic characters.There may be two consequences,one is to reduce the size of cross section and the other is to change the river shape,such as the curvature radius.The phenomena of the local backwater and velocity variety are obvious,which result in some problems for the navigation: sediment,transport and so on.In this paper, the study object is the Flood-Control-Projects and Yangtse River and Jialing River,and the aim is to study the influence of the Flood-Control-Projects on the hydrodynamic state of the two rivers.Using the numerical technique,with the two rivers hydrodynamic model the flow field's change of river after completion of Flood-Control-Projects is simulated and the reasons caused by the change are analyzed.     

Behavior and Design of High-strength Bolt in Tensile Connection

The tensile strength of high strength bolt is affected by many factors, including prying force. The prying force can result in the increment of bolt force, for which the connection failed ahead of time. Several methods are presented for calculating the prying force. In the China's "Code for Design of Steel Structure" (GB50017), there is no formula for calculation of prying force and a factor of 0.8 is considered in formula for tensile strength of bolt for taking the prying force into account. It is proposed that the design value of tensile resistance for high strength bolt should be increased.     

The Algorithm of Searching out the Least and Most Loops by Making Use of Direction Factor

Based upon the conception of the least loop,the most loop and direction factor presented by the author firstly,the algorithm of searching out the least and most loops has been designed.By building the adjoining matrix, confirming the start-point of searching,vectorizing the searching sides,calculating the direction factor of adjoining sides,we can search out the next side of the least loop or the most loop rapidly.With a valid searching side being confirmed at every searching and the searching scope being reduced by forming degenerate graph,the time compexity of the algorithm is much less. In the research of the automatic calculating system of construction quantities, the problem of houses partition and out-wall partition had been solved succesfully by utilizing this searching algorithm.     

Using midday stem water potential for scheduling deficit irrigation in mid–late maturing peach trees under Mediterranean conditions

Irrigation techniques that reduce water applications are increasingly applied in areas with scarce water resources. In this study, the effect of two regulated deficit irrigation (RDI) strategies on peach [Prunus persica (L.) Batsch cv. “Catherine”] performance was studied over three growing seasons. The experimental site was located in Murcia (SE Spain), a Mediterranean region. Two RDI strategies (restricting water applications at stage II of fruit development and postharvest) based on stem water potential (Ψ_s) thresholds (?1.5 and ?1.8 MPa during fruit growth and ?1.5 and ?2.0 MPa during postharvest) were compared to a fully irrigated control. Soil water content (θ_v), Ψ_s, gas exchange parameters, vegetative growth, crop load, yield and fruit quality were determined. RDI treatments showed significantly lower values of θ_v and Ψ_s than control trees when irrigation water was restricted, causing reductions in stomatal conductance and photosynthesis rates. Vegetative growth was reduced by RDI, as lower shoot lengths and pruning weights were observed under those treatments when compared to control. However, fruit size and yield were unaffected, and fruit quality was slightly improved by RDI. Water savings from 43 to 65 % were achieved depending on the year and the RDI strategy, and no negative carryover effect was detected during the study period. In conclusion, RDI strategies using Ψ_s thresholds for scheduling irrigation in mid–late maturing peach trees under Mediterranean conditions are viable options to save water without compromising yield and even improving fruit quality.     

泵站中钢筋混凝土梁加固的变形计算

基于试验研究资料的分析,对于大型泵站中具有合适锚固的CFRP片材加固受弯构件变形计算方法进行研究,认为加固梁的弯矩-曲率曲线符合三线型规律（混凝土开裂前,混凝土开裂后,受拉钢筋屈服后）.通过解析分析,得到试验梁在通常两点加载条件下的任一加载阶段的弯矩及变形计算公式,与相应条件试验梁的试验测试结果吻合,可为泵站工程设计规程的制定提供参考。     

可视化编程技术在发动机外特性曲线绘制中的应用

通过对汽车发动机外特性的理论分析,在处理汽车发动机外特性曲线时,建立了一种适合处理发动机外特性曲线的三次样条函数拟合的数学模型,在C Builder可视化开发平台上,编制了汽车发动机外特性曲线绘制程序.利用三次样条函数插值法对实验数据进行拟合,实现了发动机外特性曲线绘制的自动化.     

Modeling soil water dynamics in a drip-irrigated intercropping field under plastic mulch

Intercropping, drip irrigation, and the use of plastic mulch are important management practices, which can, when utilized simultaneously, increase crop production and save irrigation water. Investigating soil water dynamics in the root zone of the intercropping field under such conditions is essential in order to understand the combined effects of these practices and to promote their wider use. However, not much work has been done to investigate soil water dynamics in the root zone of drip-irrigated, strip intercropping fields under plastic mulch. Three field experiments with different irrigation treatments (high T1, moderate T2, and low T3) were conducted to evaluate soil water contents (SWC) at different locations, for different irrigation treatments, and with respect to dripper lines and plants (corn and tomatoes). Experimental data were then used to calibrate the HYDRUS (2D/3D) model. Comparison between experimental data and model simulations showed that HYDRUS (2D/3D) described different irrigation events and SWC in the root zone well, with average relative errors of 10.8, 9.5, and 11.6 % for irrigation treatments T1, T2, and T3, respectively, and with corresponding root mean square errors of 0.043, 0.035, and 0.040 cm³ cm^?3, respectively. The results showed that the SWC in the shallow root zone (0–40 cm) was lower under non-mulched locations than under mulched locations, irrespective of the irrigation treatment, while no significant differences in the SWC were observed in the deeper root zone (40–100 cm). The SWC in the shallow root zone was significantly higher for the high irrigation treatment (T1) than for the low irrigation treatment, while, again, no differences were observed in the deeper root zone. Simulations of two-dimensional SWC distributions revealed that the low irrigation treatment (T3) produced serious severe water stress (with SWCs near the wilting point) in the 30–40 cm part of the root zone, and that using separate drip emitter lines for each crop is well suited for producing the optimal soil water distribution pattern in the root zone of the intercropping field. The results of this study can be very useful in designing an optimal irrigation plan for intercropped fields.     

Crop water requirements for rainfed and irrigated grain corn in China

A basic parametric crop water use model (WATER) that employes climatic and environmental data to calculate temporal and spatial water consumption for a variety of major corps was applied specifically for grain corn to the region of China and Korea to investigate the evapotranspiration (ET) demand on grain corn and the associated irrigation water applications necessary for optimal crop production. A network of 241 stations provided the seasonal climatic input. The climatic input consisted of data averaged over approximately a 20 year period. Among the results, highest ET under full irrigation (first harvest) occurred in the northwestern inland sections of China, whereas least ET was found for the southeast. Under rainfed conditions, the relationship became nearly inverse. In order to achieve optimum crop yields, about 1000 mm of irrigation water was needed in the northwest, contrasted with none required in the south and east of China. A sensitivity analysis was applied to determine the degree of error introduced by faulty or uncertain environmental input data.     

在水泵制造企业中应用成组技术

通过水泵生产企业现状的调查分析，在为某水泵厂开发计算机辅助企业现代化管理系统的基础上，提出了水泵生产企业运用成组技术，强化企业内部管理的内容和方法。