Effect of dihydrotestosterone on mouse embryonic stem cells exposed to H2O2-induced oxidative stress

Oxidative stresses induced by reactive oxygen species (ROS) have been shown to be involved in several physiological and pathophysiological processes, such as cell proliferation and differentiation. Steroid hormones can protect cells against apoptosis or induce cell proliferation by several mechanisms. Among androgenic hormones, dihydrotestosterone (DHT) is generated by a 5α-reduction of testosterone. Unlike testosterone, DHT cannot be aromatized to estradiol, therefore DHT is considered a pure androgenic steroid. This study was conducted to examine the effect of DHT (10^-7 M) on H₂O₂ (10^-3 M) -induced injuries in mouse embryonic stem (ES) cells. H₂O₂ induced ROS generation and increased lipid peroxide formation and DNA fragmentation. These effects of H₂O₂ were inhibited by pretreatment with DHT. H₂O₂ also increased the phosphorylation of p38 MAPK, SAPK/JNK and nuclear factor kappa B (NF-κB), but DHT blocked these effects. Moreover, H₂O₂ decreased DNA synthesis and the levels of cell cycle regulatory proteins [cyclin D1, cyclin E, cyclin-dependent kinase (CDK) 2, and CDK 4]. These effects of H₂O₂ were inhibited by pretreatment with DHT. In conclusion, DHT may partially prevent H₂O₂-induced cell injury through inhibition of ROS and ROS-induced activation of p38 MAPK, SAPK/JNK and NF-κB in mouse ES cells.     

Quercetin ameliorates glutamate toxicity-induced neuronal cell death by controlling calcium-binding protein parvalbumin

BackgroundGlutamate is the main excitatory neurotransmitter. Excessive glutamate causes excitatory toxicity and increases intracellular calcium, leading to neuronal death. Parvalbumin is a calcium-binding protein that regulates calcium homeostasis. Quercetin is a polyphenol found in plant and has neuroprotective effects against neurodegenerative diseases.ObjectivesWe investigated whether quercetin regulates apoptosis by modulating parvalbumin expression in glutamate induced neuronal damage.MethodsGlutamate was treated in hippocampal-derived cell line, and quercetin or vehicle was treated 1 h before glutamate exposure. Cells were collected for experimental procedure 24 h after glutamate treatment and intracellular calcium concentration and parvalbumin expression were examined. Parvalbumin small interfering RNA (siRNA) transfection was performed to detect the relation between parvalbumin and apoptosis.ResultsGlutamate reduced cell viability and increased intracellular calcium concentration, while quercetin preserved calcium concentration and neuronal damage. Moreover, glutamate reduced parvalbumin expression and quercetin alleviated this reduction. Glutamate increased caspase-3 expression, and quercetin attenuated this increase in both parvalbumin siRNA transfected and non-transfected cells. The alleviative effect of quercetin was statistically significant in non-transfected cells. Moreover, glutamate decreased bcl-2 and increased bax expressions, while quercetin alleviated these changes. The alleviative effect of quercetin in bcl-2 family protein expression was more remarkable in non-transfected cells.ConclusionsThese results demonstrate that parvalbumin contributes to the maintainace of intracellular calcium concentration and the prevention of apoptosis, and quercetin modulates parvalbumin expression in glutamate-exposed cells. Thus, these findings suggest that quercetin performs neuroprotective function against glutamate toxicity by regulating parvalbumin expression.     

Caffeic acid disturbs monocyte adhesion onto cultured endothelial cells stimulated by adipokine resistin

Adipokines have been implicated in the pathogenesis of atherosclerosis via pro-inflammatory mechanisms contributing to insulin resistance. The adipokine resistin causes endothelium dysfunction, which plays an important role in sustaining atherogenesis. This study investigated whether resistin induced expression of cell adhesion molecules and integrins in endothelial cells and THP-1 monocytes and whether such induction was attenuated by 1-20 μM caffeic acid. Resistin enhanced endothelial expression of vascular cell adhesion molecule 1 (VCAM-1), intercellular cell adhesion molecule 1 (ICAM-1), and E-selectin and monocyte expression of β1, β2, and α4 integrins. The enhancement of these proteins was diminished by caffeic acid with reduced THP-1 cell adhesion on activated endothelium. Caffeic acid at ≤20 μM demoted resistin-stimulated interleukin 8 (IL-8) production responsible for ICAM-1 and β2 integrin induction. The endothelial up-regulation of IL-8 secretion by resistin entailed toll-like receptor 4 (TLR4) activation, but caffeic acid diminished IL-8 production and TLR4 induction. Furthermore, caffeic acid encumbered resistin-activated nuclear factor κB (NF-κB) signaling. These results demonstrate that caffeic acid blocked monocyte trafficking to resistin-activated endothelium via disturbing NF-κB signaling responsive to IL-8. Therefore, caffeic acid may have therapeutic potential in preventing obesity-associated atherosclerosis.     

Preparation and characterization of polyurethane foam using a PLA/PEG polyol mixture

Polyurethanes are polymers with urethane linkages in their backbone. It is prepared by polyaddition polymerization between isocyanates and polyols, which produce different chemical, physical, and mechanical properties depending on their types and characteristics. Previous reports of polyurethane foams prepared by using PEG polyol indicated prominent features in the elasticity and recovery of the foams. However, it is necessary to improve the mechanical strength of these materials. In this study, polyurethane foams were prepared using a PLA/PEG polyol mixture and 1,6-hexamethylene diisocyanate. PLA polyol was synthesized by the direct condensation polymerization of lactic acid. The polyurethane foams were characterized using FE-SEM analysis, FT-IR spectroscopy, water absorbency measurement, and mechanical property measurement. In FE-SEM analysis, it was shown that the PLA content of polyol mixture significantly affected the porous structure. FT-IR spectra confirmed that urethane linkages formed between the PLA/PEG polyols and the isocyanates. The water absorbency decreased due to the hydrophobicity of PLA. With respect to the mechanical properties, the breaking stress and the Young’s modulus increased with increasing PLA content. When the PLA content of polyols was 60 and 70 percent, the breaking strain was significantly higher than those of other polyurethane foams.     

Production of carboxymethylcellulose fibers from waste lignocellulosic sawdust using NaOH/NaClO2 pretreatment

In this study, waste lignocellulosic sawdust was converted to carboxymethylcellulose (CMC) by the combination process of an inorganic base (NaOH) and a weak acid (monochloroacetic acid, MCA). Optimum conditions for the pretreatment were studied on the basis of lignin and hemicellulose removal. NaOH and MCA concentration, reaction time, and operating temperature were the parameters studied to acquire the optimized conditions for the production of CMC. Degree of substitution (DS) and solubility were greatly influenced by the changes in the experimental conditions. DS increased on increasing the concentration of NaOH and MCA but the effect was more profound during the NaOH loading. A maximum DS of 0.5 was obtained on the treatment with 20 % NaOH and 20 % MCA concentration at 50 °C, 150 rpm for 4 h. 1.28 g CMC/g cellulose was obtained at the optimized set of conditions. Structural information of cellulose and CMC was obtained using IR spectroscopy and the surface morphology was studied using field emission scanning electron microscopy (FESEM). Carboxymethylcellulose showed lower crystallinity than the native cellulose extracted from sawdust which was studied using X-ray diffraction.     

The development of an automatic pattern-making system for made-to-measure clothing

This study developed a system that automatically created individually customized patterns by combining the two methods of “automatic drafting by pattern formulae” and “grading”. The system reads four kinds of information: body measurements; basic size pattern; grading values of the pattern’s points; and an alteration rule. Using the files, the system automatically generated a grading pattern first, and then modified it according to the alteration rule to make individually customized patterns. The clothing produced from the customized pattern fit the subject better than the clothing produced from the grading method.     

Estimation of flood risk index considering the regional flood characteristics: a case of South Korea

Global warming is increasing the variability of climate change and intensifying hydrologic cycle components including precipitation, infiltration, evapotranspiration, and runoff. These changes increase the chance of more severe and frequent natural conditions, and limit ecosystem function and human activities. Adaptation to climate change requires assessment of the potential disaster risk. The objectives of this study were to estimate the flood risk index (FRI) considering regional flood characteristics at the national level and to prioritize the factors affecting flood risk through principal component analysis. FRI was estimated based on the Delphi survey results from 50 water resources experts in South Korea. The potential risk analysis was conducted for 229 local governments in South Korea. The results showed that natural and social factors were more influential flood risk factors to South Korea than administrative and economic and facility factors. Specifically, natural, social, administrative and economic, and facility factors were, respectively, highest at Jindo-Gun in Jennam-Do, Gumi-Si in Kyongsanbuk-Do, Dong-Gu in Incheon-Si, and Suwon-Si, Kyonggi-Do. Overall, the highest FRI is shown in Anyang-Si, Kyongggi-Do. The spatial distribution of the FRI was high in the southeastern coastal region and basins of the two biggest rivers in South Korea, and normalized flood frequency followed spatial patterns similar to FRIs. This study provided information on the relative flood risk index among administrative units for investment prioritization in flood risk management. In this regard, the suggested FRI is expected to significantly contribute to methodical and economic improvements in budget allocations for flood risk management.     

Associations of the variation in the porcine myogenin gene with muscle fibre characteristics, lean meat production and meat quality traits

Pig breeding is aimed at improving lean meat production ability as well as meat quality, and muscle fibre characteristics may be important for enhancing these traits. Therefore, new molecular markers have been demanded for selecting lean meat production ability and meat quality in live animals. Myogenin belongs to the MyoD gene family, and is a candidate gene responsible for muscle fibre characteristics. We identified a new single nucleotide polymorphism (SNP) site in the 5' upstream region of the myogenin gene (nucleotides C and T). A total of 252 pigs of three breeds were genotyped by polymerase chain reaction–restriction fragment length polymorphism using BspCNI . Additionally, they were genotyped for the previously detected Msp I site in the 3'-flanking region (alleles A and B). The CCBB diplotype had the highest frequency over breeds, followed by TCBB and CCAB. The other diplotypes were not found in studied pigs. Association analysis performed for the markers found that the TCBB diplotype has desirable effects on the total number of fibres (p   < 0.002), fibre cross-sectional area (p   < 0.06), and loin eye area (p   < 0.001) than the other diplotypes. Moreover, the diplotype had the highest muscle pH value (p   < 0.07) and all meat quality traits were near the upper limit of the normal range as a reddish pink, firm and non-exudative (RFN) pork. Therefore, we suggest that selection for the myogenin diplotypes could improve total muscle fibre number, size and lean meat production ability with good meat quality.     

Parthenogenetic Induction of Canine Oocytes by Electrical Stimulation and Ca-EDTA

In this study, we investigated parthenogenetic induction of canine oocytes by electrical stimulation following Ca-EDTA treatment. Oocyte maturation, parthenogenetic development, and cleavage rate in canine after various electrical stimulations (1.5, 1.8, 2.1 kV/cm) for 50 μs with single DC pulse following 1 mM Ca-EDTA treatment were investigated. In oocyte activated electrically at the voltage of 1.5 kV/cm after 1 mM Ca-EDTA treatment, the rate of pronucleus and two-cell was 4.1% and 2.7%, respectively. Although electrical stimulation could parthenogenetically induce immature oocyte to cleavage stage, degeneration rate in all experimental groups was more than 60%. This means that electrical stimulation after Ca-EDTA treatment could cause canine oocytes to be degenerated. However, two-cell in canine oocyte by parthenogenesis was for the first time induced. Therefore, we suggested that electrical stimulation for canine oocytes could induce parthenogenetically early embryonic cleavage. This result can be used as a basic data for parthenogenesis study in canine. Also, to perform more developed embryonic development, further study to parthenogenesis in canine need to be developed.