Effects of silviculture treatments in a hurricane-damaged forest on carbon storage and emissions in central Hokkaido,Japan

Hurricanes cause abrupt carbon reduction in forests, but silviculture treatment can be an effective means of quickly regenerating and restoring hurricane-damaged sites. This study assessed how silviculture treatments affect carbon balance after hurricane damage in central Hokkaido, Japan. We examined carbon storage in trees and underground vegetation as well as carbon emissions from silviculture operations in 25-year-old stands, where scarification and plantation occurred just after hurricane damage. The amount of carbon stored varied according to silviculture treatment. Among three scarification treatments, a scarified depth of 0 cm (understory vegetation removal) led to the largest amount of carbon stored (64.7 t·ha-1 C). Among four plantation treatments, the largest amount of carbon was stored in a Larix hybrid (L. gmelinii var. japonica × L. kaempferi) plantation (80.3 t·ha-1 C). The plantation of Abies sachalinensis was not successful at accumulating carbon (40.5·ha-1 C). The amount of carbon emitted from silviculture operations was 0.05-0.14 t·ha-1 C, and it marginally affected the net carbon balance of the silviculture project. Results indicate that silviculture treatments should beperformed in an appropriate way to effectively recover the ability of carbon sequestration in hurricane-damaged forests.     

Durability characteristics of cement-bonded particleboards manufactured from maize stalk residue

Cement-bonded particleboards of 6 mm in thickness were manufactured using maize stalk (Zea mays) particles of uniform sizes at three levels of board density and additive concentrations respectively. The bending strength and dimensional properties were assessed. Increase in board density and additive concentration caused increase in Modulus of rupture (MOR), Modulus of elasticity (MOE), and decrease in Thickness swelling (TS) and Water absorption (WA). The MOR, MOE and TS of the boards were significantly affected by board density except for WA, but additive concentration affected all the boards’ properties examined at p ≥ 0.05. Strong and dimensional stable cement-bonded boards could be manufactured from maize stalk particles with Portland cement as the binder after hot water treatment. Although the dimensional stability and mechanical strength properties of the boards were affected by the board density and additive concentration, the study revealed that cement-bonded particleboards could be manufactured from maize stalk (Zea mays) particles. However, the increase in board density and additive concentration could cause the increase in MOR and MOE, and cause the decrease in TS and WA of boards.     

Culling phenotypically inferior trees in seed production area enhances seed and seedling quality of <Emphasis Type="Italic">Acacia auriculiformis</Emphasis>

Improvement in seed and seedling quality of Acacia auriculiformis after culling phenotypically inferior trees was studied in a 6-year old seed production area (SPA). A 5-ha plantation was identified, of which 2.3 ha was converted into SPA. The initial stocking, 1 612 trees·ha⁻¹, was thinned down to 982 trees·ha⁻¹ based on growth characteristics. The following fruiting season, seeds were collected from 10 randomly selected trees in culled and non-culled stands, and seed physical characters, germination and seedling traits were assessed. Seed weight, seed thickness and percentage germination increased by 32.1%, 4.43% and 22.37%, respectively in the culled stand compared to the non-culled stand. Culling also increased the speed of germination, seedling dry weight and seedling vigor index. Heritability values were high for seed weight (0.974) and seed thickness (0.948) while medium values were observed for percentage germination (0.577) and total dry weight (0.534). Predicted genetic gain was 11.13% and 11.22% for seed weight and percentage germination, respectively. The actual gain was 32.1, 51.9 and 22.9% for seed weight, percentage germination and total dry matter, respectively. In conclusion, SPAs established by culling inferior trees could serve as sources of good quality seeds for reforestation programs until genetically improved seeds are made available.     

Variability and divergence in <Emphasis Type="Italic">Pongamia pinnata</Emphasis> for further use in tree improvement

A total of 24 candidate plus trees (CPTs) of Pongamia pinnata (L.) Pierre. were selected to elucidate their variation and diversity based on thirteen quantitative traits (4 pod traits, 6 seed traits of parent trees and 3 progeny traits) at Forest Research Centre, Institute of Forest Productivity — Mandar, Ranchi district during 2005–2007. The results show that, CPT-19 had maximum for seven traits viz, pod length (65.6 mm), 100-pod weight (542.4 g), seed 2D (two dimension) area (351.2 mm²), seed length (27.9 mm), seed breadth (17.4 mm), 100-seed weight (217.9 g) and plant height (164.3 cm). The traits, 100-pod weight and 100-seed weight had a high heritability (98.4%, 96.9%) accompanied with high genetic advance (46.0%, 34.9%). There is a positive significant correlation between 100-pod weight and 100-seed weight traits at both genotypic and phenotypic levels with plant height, collar diameter and volume index at 30 MAS (months after sowing). Volume index expressed a moderate heritability (47.4%) accompanied with high genetic advance (48.4%), indicating that the character is governed by additive gene effects. In divergence study, 24 accessions were grouped into 6 clusters on the basis of non-hierarchical euclidian cluster analysis. The genotypes in cluster IV (CPT-5, CPT-6, CPT-7, CPT-12, CPT-16, CPT-18, CPT-22) and cluster III (CPT-4, CPT-8, CPT-9, CPT-20, CPT-21) were most heterogeneous and can be best used within group hybridization. The wide diversity exists between the cluster V and II, followed by cluster II and I and crosses between CPTs of these clusters may result in substantial segregates. It is revealed that the existence of substantial variation and diversity can be utilized for genetic resource conservation and further tree improvement programmers of the species.     

Species diversity and stability of natural secondary communities with different cutting intensities after ten years

Species diversity and stability of natural secondary communities in different layers with different cutting intensities 10 years later were investigated by calculating Marglef Richness index (R), Shannon-Wiener diversity index (H), Simpson diversity index (P), and Pielou Evenness index (J). Results show that the values of R, H and P among different layers are listed in a decreasing order: the shrub layer > the arbor layer > the herb layer, all the three indices values reach the maximum under medium selective cutting intensity after 10 years. The J value of the shrub layer shows a concave parabolic change with the increase in cutting intensity; it shows a linear increase for the arbor layer, whereas the J value of the herb layer shows an opposite change pattern. The values of R at different cutting intensities had high significant difference, but other indices had not significant difference. The stability of communities at different cutting intensities after 10 years is non-cutting> low selective cutting intensity > medium selective cutting intensity > high selective cutting intensity > extra-high intensity > clear cutting. The stability of communities at different cutting intensities after 10 years shows that the greater cutting intensities, the worse the stability is.     

Woody species composition,diversity and structure of riparian forests of four watercourses types in Burkina Faso

Riparian forests are classified as endangered ecosystems in general,particularly in sahelian countries like Burkina Faso because of human-induced alterations and civil engineering works.The modification of this important habitat is continuing,with little attention being paid to the ecological or human consequences of these changes.The objective of this study is to describe the variation of woody species diversity and dynamic in riparian forests on different type of watercourse banks along phytogeographical gradient in Burkina Faso.All woody species were systematically measured in 90 sample plots with sides of 50 m × 20 m.Density,dominance,frequency and species and family importance values were computed to characterize the species composition.Different diver-sity indices were calculated to examine the heterogeneity of riparian forests.A total of 196 species representing 139 genera and 51 families were recorded in the overall riparian forests.The species richness of individuals with dbh ≥ 5cm increased significantly from the North to the South along the phytogeographical gradient and varied significantly between the different types of riparian forests.Similarity in tree species composition between riparian forests was low,which indicates high beta diversity and reflects differences in habitat conditions and topography.The structural characteristics varied significantly along the phyto-geographical gradient and between the different types of riparian forests.The diameter class distribution of trees in all riparian forests showed a reverse "J" shaped curve except riparian forest of stream indicating vegetation dominated by juvenile individuals.Considering the ecological importance of riparian forest,there is a need to delineate and classify them along watercourses throughout the country.     

Population status and regeneration of a tropical clumping bamboo <Emphasis Type="Italic">Schizostachyum dullooa</Emphasis> under two management regimes

Schizostachyum dullooa (Gamble) Majumder ‘dolu bamboo’ is a thin walled sympodial moderate sized to large tufted bamboo, dominant in the successional fallows of northeast India. The impact of resource management on productivity and sustainability of the species was evaluated by investigating the population status and regeneration in Cachar tropical semi evergreen forest under private property resource management (PPRM) and common property resource management (CPRM) regimes. Population status revealed current-year, one-year, two-year and three-year-old culms contribute 54%, 24%, 16% and 6% of the total culms per clump, respectively, under PPRM. Three-year-old culms were absent in CPRM and population status was thus represented by current year (83%), one-year (16%) and two-year (1%) old culms. Net change, rate of change and % gain in population for different age classes showed the prevalence of management practices under CPRM was unscientific. Efficiency of new culm production per clump used as an index of regeneration was 69.7% in PPRM and 59.88% in CPRM. New culms produced under CPRM were small and thin. We conclude that CPRM is inappropriate for a long term economic and ecological sustainability of the species and alternative management protocols are needed for conservation of the species.     

Identification of SSR loci in <Emphasis Type="Italic">Betula luminifera</Emphasis> using birch EST data

Expressed sequence tags(ESTs) are generated from single-pass sequencing of randomly picked cDNA clones and can be used for development of simple sequence repeat(SSR) markers or microsatellites.However,EST databases have been developed for only a small number of species.This paper provides a case study of the utility of freely available birch EST resources for the development of markers necessary for the genetic analysis of Betula luminifera.Based on birch EST data,primers for 80 EST-SSR candidate loci were ...     

Alteration of glutathione S-transferase properties during the development of <Emphasis Type="Italic">Micromelalopha troglodyta</Emphasis> larvae (Lepidoptera: Notodontidae)

Micromelalopha troglodyta (Graeser) is an important pest of poplar in China. Glutathione S-transferases (GSTs) are known to be responsible for adaptation mechanisms of M. troglodyta. The activities and kinetic constants of glutathione S-transferases in M. troglodyta were studied. Significant differences in glutathione S-transferase activity and kinetic characteristics were observed among five instars of M. troglodyta larvae. Furthermore, the inhibition of glutathione S-transferase activity in five instars by 24 inhibitors was conducted. The results show the inhibition of GST activity of different instars by 24 inhibitors was different. For GST activity in the 1st instar, chlorpyrifos, lambda-cyhalothrin, endosulfan, abamectin, fipronil and pyridaben were the best inhibitors tested, and for GST activity in the 2nd instar, tannic acid and quercetin were the most potent inhibitors tested, and for GST activity in the 3rd instar, the inhibitory effects of quercetin, chlorpyrifos and lambda-cyhalothrin were the highest, and for GST activity in the 4th instar, quercetin and lambda-cyhalothrin were the best inhibitors, and the inhibitory effect of phoxim was the highest for GST activity in the 5th instar. Our results show that glutathione S-transferases in different instars are qualitatively different in isozyme composition and thus different in sensitivity to inhibitors.     

Interaction analysis between slenderness ratio and resin content on mechanical properties of particleboard

The interaction between particle size and resin content is one of the most important structural parameters that can influence the accuracy of predictions about wood-composite properties. We developed three kinds of equation (linear, quadratic, and exponential) for each mechanical property of particleboard based on slenderness ratio and resin content at a constant density (0.7g cm -3 ). Results from SHAZAM software (version 9) suggested that the quadratic function was not significant, but the linear and exponential functions were significant. The interaction between particle size and resin content was analyzed by Maple 9 software. The results indicated that an exponential function can better describe the simultaneous effect of slenderness and resin content than a linear equation. Under constant resin content, particles with higher slenderness ratios increased more in modulus of rupture (MOR) and modulus of elasticity (MOE) than did particles with lower slenderness ratios. Edge withdrawal resistance (SWRe) values did not increase with increasing slenderness ratio.