Regional differences in aspen (Populus tremuloides Michx.) seedling response to an established nursery protocol

New Forests - In seedling-based reforestation operations, seed source is known to be an influential variable affecting outplanting success. Adaptive variation among seed sources may also be an...     

Ripening reduces the shrinkage of processed dredged material

Purpose

The utilization of dredged material in dike construction as a substitute for traditionally used materials is considered as an option to preserve natural resources such as marsh sediments. As a prerequisite for this application, the equivalency with respect to soil physical and mechanical properties of the materials must be assessed. Previous investigations have shown pronounced differences in shrinkage behavior and desiccation cracking between sediments and dredged material. The key objective of the study was to assess whether shrinkage of processed dredged material can be reduced by further processing, i.e., dewatering, which can be referred to as ripening.

Materials and methods

To compare the shrinkage behavior of the materials, three different methods of different scales were applied. Small-scale methods conducted were the standard procedure for the determination of the shrinkage limit and the determination of the coefficient of linear extensibility (COLE_rod). Large-scale shrink-swell experiments were carried out in a specially constructed test system with 90 l capacity for a period of up to 385 days. Here the materials were ripened, i.e., air-dried, until shrinkage almost ceased, and a rewetting-air-drying cycle was conducted. Shrinkage and swelling were determined during the processes by measuring the changes in volume. On the ripened materials, COLE_rod was determined.

Results and discussion

The experiments show that the shrinkage behavior of processed dredged material can be ameliorated by ripening. COLE_rod of the ripened materials were about 20–80% lower than COLE_rod of the un-ripened materials. The large-scale shrink-swell experiments showed that shrinkage in the second drying cycle amounted to less volume than in the first drying cycle and that shrinkage behavior in contrast to the first drying cycle, where pronounced proportional shrinkage was observed, was dominated by structural and residual shrinkage in this cycle.

Conclusions

Ripening of processed dredged material is considered a useful pre-treatment option to ameliorate the shrink-swell behavior of processed dredged material and to obtain a better functional equivalency with traditionally used dike construction materials such as fine-grained marsh sediments.

     

Effects of porcine relaxin on induced parturition in beef heifers

Two-year-old crossbred beef heifers were used to test the effects of porcine relaxin (pRelaxin) alone, or in combination with dexamethasone, on the induction of parturition, the incidence of dystocia, and retained placentas. Effects of treatment on pelvic area, postpartum interval, milk production, colostrum quality, calf birth weight, calf vigor, and calf performance were also evaluated. On Day 275 of gestation, heifers from two fetal-sire groups were randomly assigned to one of four groups in a 2 × 2 factorial design and received: no treatment (controls, N = 19), 20 mg of dexamethasone intramuscularly (im) (n = 22), 5 mg of pRelaxin (3,000 U/mg) im (n = 19), or 20 mg of dexamethasone plus 5 mg of pRelaxin (n = 17). Length of gestation (in days) was less (P < 0.05) in heifers treated with dexamethasone (279.8 ± 1.0) than in controls (286.6 ± 0.9), but was not influenced (P > 0.05) by treatment with pRelaxin. The incidence of retained placentas in heifers treated only with dexamethasone (27.3%) was not reduced by concomitant treatment with pRelaxin (35.3%). Retained placentas were not observed in any control heifers and in only one heifer (5.2%) treated solely with pRelaxin. Ease of calving (1 = unassisted, 5 = abnormal presentation) was not influenced by treatment (P > 0.05), even though birth weights (in kilograms) of calves from heifers treated with dexamethasone (36.4 ± 0.8) were less (P < .01) than those of calves from nondexamethasone-treated heifers (39.2 ± 0.8). Dexamethasone tended to reduce (P < 0.07) calf vigor (1 = healthy and strong, 5 = dead on arrival; 1.48 ± 0.11 vs. 1.18 ± 0.11), but was not (P > 0.05) influenced by pRelaxin. The duration of the postpartum anestrous interval (73.1 ± 1.8 d across groups) and pelvic areas following treatment and parturition were not influenced (P > 0.05) by dexamethasone or pRelaxin. Although determinants of colostrum quality (P < 0.01) and quantity (P < 0.08) of milk produced were influenced by dexamethasone, adjusted 205-d weights of calves did not differ (P > 0.05) among groups. In conclusion, treatment with pRelaxin alone failed to induce parturition or, when combined with dexamethasone, to reduce the incidence of retained placentas.     

Phosphorylation by p38 MAPK as an alternative pathway for GSK3beta inactivation

Glycogen synthase kinase 3beta (GSK3beta) is involved in metabolism, neurodegeneration, and cancer. Inhibition of GSK3beta activity is the primary mechanism that regulates this widely expressed active kinase. Although the protein kinase Akt inhibits GSK3beta by phosphorylation at the N terminus, preventing Akt-mediated phosphorylation does not affect the cell-survival pathway activated through the GSK3beta substrate beta-catenin. Here, we show that p38 mitogen-activated protein kinase (MAPK) also inactivates GSK3beta by direct phosphorylation at its C terminus, and this inactivation can lead to an accumulation of beta-catenin. p38 MAPK-mediated phosphorylation of GSK3beta occurs primarily in the brain and thymocytes. Activation of beta-catenin-mediated signaling through GSK3beta inhibition provides a potential mechanism for p38 MAPK-mediated survival in specific tissues.     

Structure—activity relationships of organotin biocides and Ceratocystis ulmi

The effect of organotin compounds on the growth of Ceratocystis ulmi, the causative agent of Dutch elm disease, was studied in shake culture. Triphenyltin, (C₆H₅)₃SnX, tricyclohexyltin, (C₆H₁₁)₃SnX, and tributyltin, (C₄H₉)₃SnX, compounds were all effective in the inhibition of C. ulmi in vitro. The anionic group, X, did not play a major role in the inhibitory activities of these compounds, suggesting that the species involved in the inhibition is R₃Sn⁺ or the hydrated cation.     

Pain management in horses and farm animals

Objective: This review discusses the different analgesic drugs and routes of administration used in large animals for acute pain management. General guidelines and doses are given to assist in choosing techniques that provide effective analgesia. Etiology: Noxious stimuli are perceived, recognized, and localized by specialized sensory systems located at spinal and supraspinal levels. Diagnosis: Localizing the source of the noxious stimulus as well as understanding the behavioral aspects and physiological changes that result from such insult is important to adequately diagnose and treat pain. Pain assessment is far from being definite and objective; not only are there species differences, but also individual variation. In addition, the behavioral and physiological manifestations vary with the acute or chronic nature of pain. Therapy: Pain management should include (1) selecting drugs that better control the type of pain elicited by the insult; (2) selecting techniques of analgesic drug administration that act on pathways or anatomical locations where the nociceptive information is being processed or originating from; (3) combining analgesic drugs that act on different pain pathways; and (4) provide the best possible comfort for the animal. Prognosis: Providing pain relief improves the animal's well being and outcome; however, interpreting and diagnosing pain remains difficult. Continuing research in pain management will contribute to the evaluation of the pathophysiology of pain, pain assessment, and newer analgesic drugs and techniques.     

Binding of ciprofloxacin labelled with technetium Tc 99m versus 99mTc-pertechnetate to a live and killed equine isolate of Escherichia coli

This paper describes a simple methodology for evaluating the bacterial binding of ciprofloxacin labelled with technetium Tc 99m. Using this methodology, the binding of 99mTc-ciprofloxacin by live Escherichia coli was compared with the binding of 99mTc-ciprofloxacin by killed E. coli and the binding of 99mTc-pertechnetate (99mTcO4-) by live E. coli. The antimicrobial effect of 99mTc-ciprofloxacin on E. coli was evaluated. Four groups were defined: live E. coli with 99mTc-ciprofloxacin, live E. coli with 99mTcO4 , killed E. coli with 99mTc-ciprofloxacin, and killed E. coli with 99mTcO4-. After 0, 2, and 4 h of incubation of 1 x 10(8) colony-forming units of E. coli suspended in 5 mL of sterile distilled water with 1.85 MBq of 99mTc-ciprofloxacin or 99mTcO4, 1 mL from each sample was centrifuged. The radioactivity of the bacterial pellet and that of the supernatant were measured separately, and the percentage of sample radioactivity attributable to bacterial binding was calculated. Of the 99mTc-ciprofloxacin, 3.6% to 5.9% was bound to live or killed E. coli; only 0.1% to 0.2% of the 99mTcO4- was bound to live E. coli (P < 0.0001). No significant difference in 99mTc-ciprofloxacin binding was found between live and killed E. coli (P = 0.887). An antimicrobial effect on E. coli was seen with 99mTc-ciprofloxacin: colony counts were reduced after 4 h. The small amount of 99mTc-ciprofloxacin binding and the lack of difference in binding between live and killed E. coli may limit the utility of this methodology in evaluating the presence of E. coli infection.     

Physical and hydraulic properties of baked ceramic aggregates used for plant growth medium.

Baked ceramic aggregates (fritted clay, arcillite) have been used for plant research both on the ground and in microgravity. Optimal control of water and air within the root zone in any gravity environment depends on physical and hydraulic properties of the aggregate, which were evaluated for 0.25-1-mm and 1-2-mm particle size distributions. The maximum bulk densities obtained by any packing technique were 0.68 and 0.64 g cm-3 for 0.25-1-mm and 1-2-mm particles, respectively. Wettable porosity obtained by infiltration with water was approximately 65%, substantially lower than total porosity of approximately 74%. Aggregate of both particle sizes exhibited a bimodal pore size distribution consisting of inter-aggregate macropores and intra-aggregate micropores, with the transition from macro- to microporosity beginning at volumetric water content of approximately 36% to 39%. For inter-aggregate water contents that support optimal plant growth there is 45% change in water content that occurs over a relatively small matric suction range of 0-20 cm H2O for 0.25-1-mm and 0 to -10 cm H2O for 1-2-mm aggregate. Hysteresis is substantial between draining and wetting aggregate, which results in as much as a approximately 10% to 20% difference in volumetric water content for a given matric potential. Hydraulic conductivity was approximately an order of magnitude higher for 1-2-mm than for 0.25-1-mm aggregate until significant drainage of the inter-aggregate pore space occurred. The large change in water content for a relatively small change in matric potential suggests that significant differences in water retention may be observed in microgravity as compared to earth.