Performance of wheat (Triticum aestivum) to incorporation of organic manure and bioinoculants

A field experiment was conducted to evaluate the effect of integrated use of farmyard manure and bio-inoculants on wheat productivity for two years in succession. Increasing levels of farmyard manure (FYM) up to 15 t ha^?1 significantly (p ≤ 0.05) improved the dry matter accumulation, effective tillers per m row length, and grain weight per spike in both the years. Application of 15 t ha^?1 FYM caused significant increase in spikelets per spike and grains per spike over control and 5 t ha^?1 during two consecutive years. Inoculation with MSX-9 strain of Azotobacter chroococcum produced significantly higher dry matter accumulation to 25.63, 13.33, 7.78 and 23.66, 8.35, 5.50% over uninoculation, Azospirillum brasilense (SP-7) and Azospirillum lipoferum (A-5) at harvest during 1999–2000 and 2000–2001, respectively. Incorporation of 15 t ha^?1 FYM significantly (p ≤ 0.05) enhanced grain and straw yield to 62.45 and 38.05%; 56.66 and 36.28%; 59.42 and 37.52% over control in 1999–2000, 2000–2001 and pooled analysis, respectively. The grain and straw yield of wheat significantly (p ≤ 0.05) enhanced to 26.51, 10.10, 7.54 and 14.45, 5.77, 3.16% through A. chroococcum (MSX-9), A. brasilense (SP-7) and A. lipoferum (A-5) over uninoculation.     

Simulating coconut growth, development and yield with the InfoCrop-coconut model

Simulation modeling of perennial crops has immense potential for generating information for plantation managers. We report the development of the InfoCrop-coconut model and its application to coconut (Cocos nucifera L.) growing in diverse tropical and subtropical environments. The model is based on the generic crop model InfoCrop that simulates various annual crops in tropical and subtropical regions. The InfoCrop-coconut model was calibrated and validated with data compiled from published studies comprising many physiological, agronomical and nutritional experiments conducted between 1978 and 2005 in diverse geographic locations throughout India. The treatments included various water and nutrient regimes and varieties of coconut. Time to first flowering varied between 4 and 6 years, leaf production varied from 8 to 15 leaves year(-1) and nut yield ranged from 3000 to 27,000 nuts ha(-1) year(-1). The genetic coefficients used for calibration and validation were generated from field experiments conducted during 1995-2005. Model efficiency and validation performance were analyzed statistically. Simulated trends in phenological development, total dry mass and its partitioning, and nut yield agreed closely with observed values, although a 15% error was observed in a few cases. Considering that field measurements have an experimental error of 10-15% and wide variation existed within treatments, the model adequately simulated the effects of management practices and agro-climatic conditions over short periods. For a range of agro-climatic zones, simulated potential yields varied from 26 to 30 Mg ha(-1) year(-1) and potential annual dry mass production varied from 52 to 62 Mg ha(-1), depending on environment. We conclude that InfoCrop-coconut can be used to increase the efficiency of agronomic experiments designed to aid coconut crop management.     

Plasma clearance and tissue uptake of native and desialylated equine gonadotropins

Equine luteinizing hormone (eLH), equine follicle stimulating hormone (eFSH) and equne chorionic gonadotropin (eCG) were desialylated and their plasma disappearance, tissue uptake and degradation determined. Both native hormones and their desialylated derivatives were radioiodinated and injected intravenously into male rats. Plasma samples were taken at different time intervals and examined for both total and trichloroacetic acid (TCA) precipitable radioactivity. Disappearance curves for each hormone consisted of two exponential components: a fast clearance followed by a slow phase. The apparent $\text{t}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ of the fast component for native eCG, eLH and eFSH were 18.3 min, 17.0 min and 17.1 min, respectively; this is in contrast to their desialylated derivatives which had a $\text{t}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ of 2.8 min, 4.9 min and 7.1 min, respectively. The slower component for native and desialylated eCG had at $\text{t}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ of 355.5 min and 171.2 respectively. After TCA precipitation more than 90 percent of the radioactivity in plasma was in the pellet, whereas in urine almost 95 percent of the radioactivity was in the TCA supernatant. Coincident with the disappearance of the hormone from the plasma its uptake and release was observed in liver, kidney, testis, and muscle tissue. Gel filtration data on plasma and urine samples indicated that the former had mostly intact hormone in contrast with the latter. Together these results indicate that eLH, eFSH and eCG disappear from the plasma of male rats in a biphasic manner with a rate slower than their desialylated derivatives.     

Changes in skin and rectal temperature in lactating buffaloes provided with showers and wallowing during hot-dry season

Twelve Murrah buffaloes in second or third parity during early lactation (50–70 days) were selected from the Institute’s herd. All the buffaloes were kept under loose housing system and were provided ad lib green maize fodder and water to drink during 30 days experiment during the month of August- September. The buffaloes were divided into two groups of six each. Showering group (SG) buffaloes were kept under water showers from 11:00 a.m. to 4:00 p.m., while wallowing group (WG) buffaloes were allowed to wallow in a water pond during the same time. Physiological responses viz. rectal temperature (RT), respiration rate (RR), pulse rate (PR) and skin temperature (ST) were recorded before (8.00 a.m.) and after (4.00 p.m.) showers or wallowing. Skin temperature at different sites i.e. trunk, forehead, udder, udder vein, and neck regions was measured. Skin and rectal temperature of both the groups were non significant in morning but varied (P < 0.01) in the evening. Skin temperature measured at all the sites was significantly lower (P < 0.01) in wallowing buffaloes than the showering group. Further, skin temperature of neck, head, udder, udder vein and RT varied (P < 0.01) in SG and WG buffaloes during periods of study. The significant changes in all the parameters of study further support the evidence on effective cooling of skin by wallowing in comparison to water showers. The correlation data indicated a positive correlation of maximum air temperature with RT in SG but correlation was non-significant in WG. RT was positively correlated with ST in SG (P < 0.05) and WG (P < 0.01). The pooled data analysis of both groups also indicated a positive correlation of maximum temperature with RT (P < 0.05). The morning respiration and pulse rate non-significantly varied in both group, however, in the evening, the respiration rate and pulse rate was more (P < 0.01) in SG in comparison to WG. No adverse effect of wallowing or shower treatment on mastitis incidence and general health of animals was observed.     

Evaluation of a monoclonal antibody-based approach for the selection of foot-and-mouth disease (FMD) vaccine strains

Foot-and-mouth disease (FMD) virus exists as seven serotypes within which are numerous variants necessitating careful selection of vaccine strains. Currently, a serological assay system based on the use of polyclonal vaccine antisera is widely used for this selection. However, inherent variability in the matching antisera used makes the tests poorly reproducible and difficult to interpret. In this study, we have explored the possibility of replacing or supplementing the polyclonal antibody (PAb)-based method with one based on use of monoclonal antibodies (MAb). Panels of MAbs raised against two serotype O vaccine strains were examined for reactivity with 22 field viruses, isolated over a 10-year period between 1991 and 2001. Antigenic site 2 was found to comprise more than one epitope. The sequence variation in capsid protein VP2 harbouring antigenic site 2 was analysed and the amino acid residues at positions 79 and 134 appeared to greatly influence the binding of site 2 MAbs. Prediction of antigenic match based on MAb reactivity did not correlate closely with the results of a PAb-based "gold-standard" method and it was concluded that a wider panel of MAbs are needed that recognise all protective epitopes present on the surface of FMD virus together with a better understanding of those epitopes which are important in conferring protection.     

Identification of human uromodulin as the Tamm-Horsfall urinary glycoprotein

The primary structure of human uromodulin, a 616-amino acid, 85-kilodalton glycoprotein with in vitro immunosuppressive properties, was determined through isolation and characterization of complementary DNA and genomic clones. The amino acid sequence encoded by one of the exons of the uromodulin gene has homology to the low-density-lipoprotein receptor and the epidermal growth factor precursor. Northern hybridization analyses demonstrate that uromodulin is synthesized by the kidney. Evidence is provided that uromodulin is identical to the previously characterized Tamm-Horsfall glycoprotein, the most abundant protein in normal human urine.     

Spontaneous ordering of oxide nanostructures

We report the spontaneous formation of uniformly distributed arrays of "tips" (tall conical hillocks) upon oxidation of palladium (Pd) thin films. The formation of the palladium oxide tips depended on the thickness and granularity of the Pd film and on annealing and oxidation conditions. As the Pd film thickness increased from 40 to 200 nanometers, the average height of the tips increased from 0.5 to 1.2 micrometers, their height distribution became broader, and their density decreased from 55 x 10(6) to 12 x 10(6) per square centimeter. Enhanced photoelectron emission from locations corresponding to the tips suggests their possible use in field emission applications.     

Acidification of Surface Water in Central India

The results of the seasonal analysis of the chemistry of rain, fog and surface water of central India for the two years: June 1996 to May 1998 are presented. A total of 636 rain water samples, 146 fog water samples and 226 surface water samples of 8 locations: namely, Ambikapur, Baikunthpur, Korba, Bilaspur, Raipur, Bhilai, Dallirajhara and Kanker, from different sites were collected for the present study. This paper documents the occurrence of acidic rain and fog events and their effect on surface water pH and aquatic life in central India. Most of the rain and fog water samples collected from Baikunthpur and Korba sites were found to be acidic in nature (i.e. pH < 5). The volume weighted mean pH of rain and fog water samples of these sites was 4.8 and 4.4 with lowest pH 4.4 and 4.0, respectively. However, samples from Ambikapur, Bilaspur, Raipur and Bhilai were slightly acidic and their pH values were always around 5.8. One reservoir (mean pH 5.8) and two stop dams (mean pH 4.4 and 4.2) in Baikunthpur area were found to be acidic. The effect of acidification of water on metal-accumulation in muscles of fishes was studied. Concentrations of Al, Hg, Mn, Cd and Pb were higher in fish from acid, than from less acid waters. Causes of acidification of the atmospheric water and surface water are critically discussed.     

Optimal design of single and multiple stage activated sludge processes

The present paper describes a rational approach to minimum cost design of an integrated activated sludge process which includes activated sludge reactor, secondary clarifier and sludge recycle. The cost of anaerobic digestion of excess sludge produced is also considered. Procedures for optimal design of both single and multiple stage activated sludge processes, considering construction and operational costs are developed. Biomass concentration in aeration tank and return sludge are utilized as the primary independent design variables to which system performance is related for single stage process. In the multiple stage process, additional design variables (flow and volume fractions for each stage) are included in design vector. Liquid-biomass separation is based on the batch solids flux theory. The optimization problem is framed as minimization of capital and operating cost subject to the constraints determined by effluent quality criteria and process variables affecting the performance. The interior penalty function method is used. Results definitely favor the application of multiple stage process over single stage. The major factor which appears to be contributing to reduction in cost is the biological solids retention time and hence the aeration tank volume.