不同发酵条件对荔枝产香菌发酵茶品质的影响

经过长时间的工艺优化,国内不同地区的黑茶风味已趋于稳定,为了进一步改善发酵茶品质,生产更具特色的发酵茶,利用课题组前期已筛选出的一株适用于茶叶发酵的优良产香菌ZYF3单菌发酵青砖茶原料(一芽四五叶)。在实验室条件下,以灭菌后青砖茶为发酵原料,探究该菌株在不同接菌量、不同茶坯含水量、不同发酵温度和不同发酵时间下对发酵茶感官品质和理化品质的影响。结果表明:在不同发酵条件下,产香菌ZFY3发酵茶品质差异显著,当接种量为1.2%～1.3%(mL/g)、茶坯含水率为45%、发酵温度为32℃、发酵时间为20 d时,发酵茶综合品质最佳。不同发酵条件能明显改善荔枝产香菌发酵茶品质,并且促进发酵茶特殊风味的形成。     

巴氏杀菌乳中金黄色葡萄球菌的生长预测模型构建

巴氏杀菌乳中金黄色葡萄球菌污染可能会产生肠毒素,对人体健康造成危害。分别监测在4、10、16、20、24、28℃储藏条件下金黄色葡萄球菌在巴氏杀菌乳中的生长数据,采用Modified Gompertz模型、Logistic模型、Huang模型和Baranyi模型构建金黄色葡萄球菌动力学一级模型,采用平方根模型和Arrhenius模型建立二级模型以描述温度与相对最大生长速率(μ_max)的关系。结果显示,各温度下Modified Gompertz模型的拟合度更优,决定系数(R²)>0.98,均方根误差(RMSE)<4.6,为最合适的一级模型。二级模型中,Arrhenius模型的拟合度更优(R²=0.99,RMSE=0.60)。相较于平方根模型,外部验证显示Arrhenius模型的精确度因子(A_f)和偏差因子(B_f)分别为1.39和0.87,较接近于1,说明预测效果更好。研究结果可为巴氏杀菌乳中金黄色葡萄球菌的风险评估提供数据基础,为乳品货架安全期预测提供科学依据。     

重组鸡β-防御素6基因的表达和生物学特性的研究

目的为开发中药防治畜禽沙门氏菌病,根据沙门氏菌病中兽医辩证进行中药组方,为今后畜禽养殖减抗限抗的替代疗法提供参考。方法采用倍比稀释法检测复方板蓝根口服液对鸡白痢沙门氏菌的最小抑菌质量浓度(minimum inhibitory concentration,MIC)和最小杀菌质量浓度(minimum bactericidal concentration,MBC),扫描电镜观察菌体形态变化。试验选取150羽1日龄雏鸡,随机取出30羽做空白组,其余120羽人工感染鸡白痢沙门氏菌,制备雏鸡感染模型。将感染雏鸡随机分为模型组、中药治疗组、西药治疗组和中药预防组,每组30羽。观察雏鸡的发病率及死亡率。于治疗后1、3和5 d检测血清中IL-1β和TNF-α的含量;实时荧光PCR检测禽β-防御素6 (avian beta-defensin 6,AvBD6) 和鸡Toll样受体15 (chicken toll-like receptor 15,ChTLR15) 在雏鸡小肠中的转录水平。结果体外试验结果显示：MIC和MBC分别为62.5和125 mg/mL;扫描电镜下可见菌体出现溢缩,断裂形成许多残体,形状不规则。中药预防组可降低雏鸡的发病率及死亡率。与模型组相比,中药预防组和中药治疗组均可降低IL-1β和TNF-α含量。而ChTLR15和AvBD6在感染初期表达量高,治疗后期趋于正常。结论复方板蓝根口服液对鸡白痢沙门氏菌有明显的抑制作用,其杀菌机制是通过改变菌体的形态结构使细菌丧失活性。试验证实复方板蓝根口服液可有效预防雏鸡沙门氏菌感染,并能有效降低体内炎性因子水平,减轻炎症反应。     

复合式分离型热管在原油采出液余热回收中的应用

通过蒸汽辅助重力泄油(Steam Assisted Gravity Drainage,SAGD)技术开采稠油时,采出液温度较高,对其进行热回收的节能潜力较高,油田采用热管式换热器回收采出原油的余热,将其作为工业或生活用热具有研究价值。考虑到现场空间要求和工程设备模块化的特点,利用U形管壳式换热器、螺旋板式换热器作为分离型热虹吸热管蒸发段和冷凝段,并建立复合式分离型热管模型,分析其换热性能、循环压降、充液率及换热能力。采用新疆油田油水二次换热区的分离型热管系统验证该模型,结果表明:复合式分离型热管计算模型可行;复合式热管具备U形管壳式换热器、螺旋板式换热器的优点,换热性能强,系统换热能力可以满足实际要求,有较好的环境适应性。     

南京市绿地规划发展方向初探--以南京市绿地系统规划（2013-2020）为例

对最新版本的《南京市绿地系统规划》(2013-2020)进行分析与研究，综合相关规划文件，对南京市近几年绿地规划、建设内容进行回顾与评价，总结南京市在绿地规划方面的可取与不足之处。对南京城市的历史沿革、山水格局、绿地现状、自身定位、发展趋势进行思考，结合国内政策、国外理念等因素统筹地对南京未来的绿地发展方向进行展望与研究，包括绿地宏观布局层面、中观联系层面、微观建设层面3方面。     

Effects of dietary supplementation of nucleotides from late gestation to lactation on the performance and oxidative stress status of sows and their offspring

Increased metabolic burdens in breeding sows, which are induced by elevated systemic oxidative stress, could increase the need for nucleotides to repair lymphocyte DNA damage; however, de novo synthesis of nucleotides may be insufficient to cover this increased need. This study investigated the effects of dietary nucleotides on milk composition, oxidative stress status, and the reproductive and lactational performance of sows. Forty multiparous sows were assigned to 2 dietary treatments (Control group, and 1 g/kg Nucleotides group) based on a randomized complete block design using their BW at 85 d of gestation as a block. Sows from 2 groups were fed a restricted diet during gestation and ad libitum during lactation. The experiment lasted from 85 d of gestation to 21 d of lactation. The reproductive performance of sows and the growth performance of suckling piglets were measured. Oxidative stress parameters and milk components were also analysed. Data were analyzed using contrasts in the MIXED procedure of SAS. Sows in the Nucleotides group consumed more feed during the first week (P < 0.01) and from 1 to 21 d (P < 0.05) of lactation than those in Control group. Correspondingly, the litter weight gain of piglets showed a tendency to increase from cross-fostering to 9 d (P = 0.09) and from cross-fostering to 20 d (P = 0.10) in the Nucleotides group relative to the Control group. Additionally, the Nucleotides group was higher (P < 0.01) than the Control group in the concentrations of uridine 5''monophosphate, guanosine 5''monophosphate, inosine 5''monophosphate, adenosine 5''monophosphate and total nucleotides in milk. Furthermore, the Nucleotides group was higher (P < 0.01) than the Control group in the serum levels of total antioxidant capacity (P < 0.01) for sows at 109 d of gestation and glutathione peroxidase for weaning piglets, but lower at the levels of thiobarbituric acid-reactive substances (P < 0.05) in serum of weaning piglets. This study indicated that maternal dietary nucleotides could promote piglet growth, probably due to the higher lactational feed intake and higher concentration of nucleotides in the milk of sows, and lower oxidative stress for both sows and piglets.     

微波解冻与午餐肉罐头的生产

详述了首次在国内午餐肉罐头生产中采用的微波解冻系统科技成果的实施情况、系统操作与安全控制特点以及运行条件。探讨微波解冻技术支持下,无亚硝酸钠午餐肉罐头的生产工艺原理及其品质卓越的原因。     

Reuolution and Research of Green Automobile

The green is as a symbol of no pollution,no public harm and environmental protection. The green automobile is the inevitable results that the automobile technique continuously developes. A new style vehicle--the green automobile is the urgent solicit of environmental protection is developed. The automobile industry can develop continuously. This article mainly discusses the importance of the green auto_mobile's research and development,the development status in quo and prospect of the green auto_mobile technique in the world,and states the relationship between the green automobile technique and environmental protection from green technical system theoretically clarify the study of green automobile,including its design and the system,the manufacture and its technology,the energy,the rebuild engineering and a series of subjects. How to evaluate the cycle and the evaluable mark of the green automobile,the prospect of green automobile are pointed out.     

Digital Beamforming for Unified Spread Spectrum TT&C System

In TT&C system,unified spread spectrum framework and adaptive antenna digital beamforming technologies are used to track, telemetry and command objects. Constant modulus array (CMA) and adaptive signal canceller estimate the direction of arrival (DOA) of every signal and use the optimum weighted vector to form the beams. The phase weighted vectors estimated from DOA improve the processing gain as well as being utilized in the transmitting of tele command signal to form the beam of specified object. Its processing performance is researched and simulated in this paper.     

Intensity Comparative Analysis Based on Ideas Between Involute Gear and Double Involute Gear

Modeler and simulation modules in Ideas software are used to build the finite element models on involute gear and double involute gear with accurate tooth shape, and with the same design parameters and under the same loads, finite element contact analysis has been done. At last, the contact stress and bending stress on the two types gear transmission at the different meshing positions are solved out, and comparative analysis and study have been done. At the same time, that the ladder-shape tooth on the double involute gear how to influence contact stress and bending stress is emphatically analysed. All above offer the theoretical foundation that bring the double involute gear with ladder-shape tooth into the industry.