A New Method for Parameterized Design of Metallic Doors and Windows

According to the graphics characteristics of metallic doors & windows design and based on the research of graphics dimension restriction problems. This paper provides a new method for parameterized design of metallic doors & windows in virtue of expression solution. In this method, the restrictions of graphic elements have been changed into the parameter expressions of sizes and positions of graphic elements. Through the calculation of such expressions, the parameter driven method has been reached. Thus the parameterization of graphics can be easier and quicker than before. It can be used to setup the open parameterized graphics libraries.     

建立农产品质量安全市场准入机制的原则及措施分析

随着《中华人民共和国农产品质量安全法》的深入实施,中国农产品质量安全准入制度的建立势在必行,而建立良性的准入机制是各项制度有效运转的根本。该文从建立良性的农产品质量安全市场准入运行机制、建设有效的技术支撑体系、加强财政政策扶持等方面入手,提出了建立农产品质量安全市场准入机制的措施和建议。     

A STUDY ON FRACTURE MECHANICS OF BRITTLE MATERIAL WITH PER-CRACKS

In this paper the fracture process of specimen,with single crack, double cracks and triple cracks is observed and analysed. The experimental results show that the fracture process of specimen is different because of the differention of the number, the distance and the type of array of cracks. And the fracture propagation of specimen with triple cracks and double cracks is foundmentally the same.     

低酚陆地棉育种亲本配合力的研究

选择８个现代低酚陆地棉育种亲本（包括４个高酚棉和４个低酚棉品种），按４×４不完全双列杂交设计，对１６个组合的Ｆ×进行了双列分析。结果表明，在所研究的１０个性状中，子棉产量、皮棉产量和纤维整齐度主要受非加性基因控制，单铃重、衣分、比强度、２．５％跨长和麦克隆值则主要由加性基因控制，衣指由加性和非加性基因共同控制，而子指受环境的影响较大；在大多数性状上，高酚棉亲本的加性遗传方差比低酚棉亲本贡献大，而在２．５％跨长和麦克隆值２个性状上，低酚棉亲本的加性遗传方差起着更重要的作用；中７８８６是综合性状比较理想的亲本材料，冀合２２５是较好的高产亲本，冀无２５２和中无１５１是较好的优质低酚棉亲本。综合一般配合力和特殊配合力分析结果，组合中７８８６×冀无２５２可具较好的育种潜力。     

Effect of soil matric potential on tomato yield and water use under drip irrigation condition

Field experiment was carried out to investigate the effect of soil matric potential (SMP) on tomato yield, evapotranspiration (ET), water use efficiency (WUE) and irrigation water use efficiency (IWUE) under drip irrigation condition in North China Plain. The experiment included five treatments, which controlled SMP at 0.2 m depth immediately under drip emitter higher than −10 (S1), −20 (S2), −30 (S3), −40 (S4) and −50 kPa (S5), respectively, after tomato plant establishment. The results showed that different SMP affected irrigation amount and tomato ET. Irrigation amount decreased from 185 mm (S1) to 83.6 mm (S5) in 2004, and from 165 mm (S1) to 109 mm (S5) in 2005, respectively. The ET decreased from 270 mm (S1) to 202 mm (S5) in both years. However, it was found that SMP did not affect the tomato yield significantly, for the range of SMP investigated. Both WUE and IWUE increased as SMP decreased. The maximum WUE (253 and 217 kg/ha mm) and IWUE (620 and 406 kg/ha mm) were for S5 in 2 years, whereas the minimum WUE (178 and 155 kg/ha mm) and IWUE 261 and 259 kg/ha mm) were for S1 in 2004 and 2005. Based on the above results, therefore, it is recommended that if the tomatoes are well irrigated (SMP is higher than −20 kPa) during establishment, controlling SMP higher than −50 kPa at 0.2 m depth immediately under drip emitter can be used as an indicator for drip irrigation scheduling during following period of tomato growth in North China Plain.     

基于GIS的黄河下游分布式水资源模拟

分布式水文模型是水文界研究的焦点问题之一。该研究选用黄河下游流域作为典型研究流域，应用ARC／INFO技术和遥感信息、国内最新水资源调查资料和我国自行开发的LL-Ⅱ分布式水文模型对流域的水资源量进行模拟计算。黄河下游流域内主河道由于泥沙的不断淤积属于典型的地上悬河，而且该地区随着经济的不断发展，人类活动对水资源的影响日益显著，尤其是跨流域调水的影响。本研究充分考虑各种人类活动对水资源的影响，对径流过程进行连续模拟，并取得了较好的模拟结果。     

安全监测技术在软基筑坝工程中的应用

在软土地基上修建50m以上的高坝．国内外尚没有先例；云南省务坪水库在软土地基上修建52m高坝的成功经验，为软基筑坝施工提供了科学的依据：安全监测技术的日益成熟和完善，为工程施工、运行提供了可靠的保障。以云南省务坪水库为例，阐述安全监测技术在软基筑坝上的应用和意义。     

基于DEM的水文模型在沮河流域的应用

基于DEM的流域水文模型是近年来水文模型的热点,而干旱半干旱地区的水文模型一直是水文研究的一个难题。分析了干旱地区的降雨产流特性,建立了符合该产流特性的数字高程模型和陕北模型相结合的水文模型,并将其应用到沮河流域桃曲坡水库的洪水预报中,计算结果证明该水文模型在干旱地区是切实可行的。     

碱法草浆造纸蒸煮黑液厌氧生物降解及其主要微生物类群研究

采用中温(35±1℃)UASB AF相结合的反应器处理碱法草浆造纸蒸煮黑液,设计了两种试验方案。试验方案Ⅰ-碱法草浆黑液酸化后进行厌氧发酵,Ⅰ号反应器内装陶粒。试验方案Ⅱ-黑液用化学法(HCl)去除木质素后进行厌氧发酵,Ⅱ号反应器内装软填料。进行HRT、有机负荷和有机污染物(COD_(cr)、BOD_5)去除效率、沼气产气率相关性试验。在厌氧发酵稳态运行条件下,采用Hungate厌氧操作技术,MPN计数法对UASB AF反应器内厌氧污泥中的主要微生物类群区系组成进行了生态分析研究。     

夹持式鲜菱角脱壳机设计与试验

针对鲜菱角手工脱壳率低、菱仁损伤率高等问题,该研究以湖北省浠水县两角菱为对象,设计了一种夹持式鲜菱角脱壳机。对鲜菱角外形尺寸和力学性能参数进行了测量,确定采用夹持板与链条夹持输送、圆形齿刀横切菱角两侧弯角、对辊挤压碾搓脱壳的技术方案。对夹持板、弹性压紧装置、横切刀片和脱壳装置等主要部件结构进行设计和分析,确定了结构和运动参数。运用ANSYS Explicit Dynamics模块对横切过程进行仿真,根据理论分析和仿真结果试制了脱壳样机,开展了横切试验和脱壳试验。横切试验表明,成熟度、输送速度和刀片转速均对切壳率影响显著（P<0.05）,对菱仁损失率影响不显著（P>0.05）。运用Design Expert 12优化得横切装置最优工作参数为：脆熟菱角、输送速度0.1 m/s、刀片转速1 000 r/min,该参数下的平均切壳率为79.41%,平均菱仁损失率为9.82%。采用Box-Benhnken试验设计开展三因素二次回归正交组合试验,优化得到脱壳装置最优工作参数为：脆熟菱角、慢辊转速59r/min,线速比1.5,验证试验的平均脱壳率为66.52%,平均菱仁破损率为12.83...