Disturbance history and dynamics of an old-growth mixed species mountain forest in the Slovenian Alps

A long history of human presence in the Alps has made studies of natural forest structure, composition, and disturbance processes difficult. In the Slovenian Alps, we identified a mixed European beech (Fagus sylvatica L.)-silver fir (Abies alba Mill.)-Norway spruce (Picea abies (L.) Karst.) stand with old-growth characteristics that escaped past cutting. We reconstructed the dynamics of the stand using a combination of stand and age structure analyses, dendroecological evidence of past canopy disturbance, and historical evidence of past human activities. The disturbance reconstruction revealed a stand-scale disturbance in the 1850s. Based on the presence of pit-and-mound topography throughout much of the stand and the absence of logging activities found in historical records, we assume this event was caused by strong winds. The current structure and composition of the stand are largely a result of this event. Post-disturbance forest development was dominated by the release of shade tolerant regeneration, especially F. sylvatica. The windthrow also created appropriate conditions (i.e. increased light and exposed mineral soil) for recruitment of less shade tolerant species, including larch (Larix decidua Mill.) and maple (Acer pseudoplatanus L.). The results suggest that periodic, intermediate severity wind disturbances, similar to the event documented here, may have had an important influence on pre-settlement forest dynamics in mixed mountain forests of the Alps, and add to the limited available information regarding the historic range of natural variability of disturbance processes. This information may be useful for forest management that attempts to emulate natural processes.     

高压静电喷雾纯天然有机制剂"泰栢一号"对蔬菜蚜虫的防治效果

"泰栢一号"是一种纯天然有机制剂,本文以吡虫啉为对照药剂,分别在室内与田间测试了在常规使用和在高压静电喷雾条件下"泰栢一号"对蔬菜蚜虫的防治效果,结果表明,"泰栢一号"40X稀释液处理蚜虫48h后死亡率为3.36%,清水对照处理的死亡率为3.33%,二者间无显著性差异,而吡虫啉10 mg/L处理24h蚜虫的死亡率为78.86%."泰栢一号"与高压静电喷雾器配合使用则表现出良好的杀虫效果,200×稀释液处理48h的蚜虫死亡率为62.22%,96h蚜虫死亡率为91.1%,这种纯天然有机物结合高压静电喷雾杀虫方法的发现,为蚜虫的无公害防治提供了一条新的途径.     

An analysis of a community food waste stream

Food waste comprises a significant portion of the waste stream in industrialized countries, contributing to ecological damages and nutritional losses. Guided by a systems approach, this study quantified food waste in one U.S. County in 1998–1999. Publications and personal interviews were used to quantify waste from food production, processing, distribution, and consumption. Approximately 10,205 tons of food waste was generated annually in this community food system. Of all food waste, production waste comprised 20%, processing 1%, distribution 19%, and 60% of food waste was generated by consumers. Less than one-third (28%) of total food waste was recovered via composting (25%) and food donations (3%), and over 7,000 tons (72%) were landfilled. More than 8.8 billion kilocalories of food were wasted, enough to feed county residents for 1.5 months. This case study offers an example of procedures to quantify and compare food waste across a whole community food system.     

Effect of water hardness on peracetic acid toxicity to zebrafish, Danio rerio, embryos

The use of peracetic acid (PAA) in aquaculture has been suggested as an alternative therapeutic agent. Few data are available concerning fish toxicity by PAA or factors that modify this toxicity. The aim of this study was to investigate the influence of water hardness on the acute toxicity of PAA products to embryos of zebrafish (Danio rerio). Embryos were exposed to PAA ranging from 0 to 9 mg/L in low-hardness (1.4 °dH or 25 mg/L hardness as CaCO₃), medium-hardness (14 °dH or 250 mg/L hardness as CaCO₃) and high-hardness (140 °dH or 2,500 mg/L hardness as CaCO₃) waters. The lowest LC50 value was 2.24 mg/L PAA in the low-hardness water, and the highest LC50 value was 7.14 mg/L PAA in the high-hardness water. Toxicity of PAA to embryos was found to be negatively correlated with water hardness. The pH decreased with increasing concentrations of PAA, and the test waters were observed to become more acidic in low hardness. In conclusion, aquaculturists using PAA should pay attention to water hardness to avoid acidosis.     

Losses of essential mineral nutrients by polishing of rice differ among genotypes due to contrasting grain hardness and mineral distribution

The effect of different polishing techniques on loss of mineral elements from rice grains was quantified using a panel of indica and tropical japonica genotypes, previously classified as differing in ease of polishing. Gradients in mineral elements across the bran-endosperm interface were quantified using micro-scaled precision abrasive polishing in combination with inductively coupled plasma mass spectrometry and synchrotron X-ray fluorescence microscopy. Frictional polishing, similar to that of commercial mills, i.e. 8–10% loss of grain weight, reduced the concentration of Fe, Mg, P, K and Mn by 60–80% in all genotypes. Following gentler polishing (3–5% weight loss), genotypes classified as difficult to polish showed smaller decreases in Fe, Mg, P, K and Mn compared to genotypes classified as easy to polish. The concentration of other elements, e.g. Zn, S, Ca, Cu, Mo and Cd, showed comparable reductions (<30%) irrespective of polishing technique or ease of polishing. The different patterns of polishing losses of minerals reflected their distribution within the grain. Five-fold differences in the reduction of Zn concentration during polishing were observed for different genotypes which started with similar Zn concentrations in the unpolished grain, thus showing clear potential for selecting genotypes with reduced polishing losses of Zn.     

Protein adsorption on nano-scaled, rippled TiO2 and Si surfaces

We synthesized nano-scaled periodic ripple patterns on silicon and titanium dioxide (TiO(2)) surfaces by xenon ion irradiation, and performed adsorption experiments with human plasma fibrinogen (HPF) on such surfaces as a function of the ripple wavelength. Atomic force microscopy showed the adsorption of HPF in mostly globular conformation on crystalline and amorphous flat Si surfaces as well as on nano-structured Si with long ripple wavelengths. For short ripple wavelengths the proteins seem to adsorb in a stretched formation and align across or along the ripples. In contrast to that, the proteins adsorb in a globular assembly on flat and long-wavelength rippled TiO(2), but no adsorbed proteins could be observed on TiO(2) with short ripple wavelengths due to a decrease of the adsorption energy caused by surface curvature. Consequently, the adsorption behavior of HPF can be tuned on biomedically interesting materials by introducing a nano-sized morphology while not modifying the stoichiometry/chemistry.     

Solvent crystallization of palm based dihydroxystearic acid with isopropyl alcohol: Effects of solvent quantity and concentration on particle size distribution, crystal habit and morphology, and resultant crystal purity

Crude dihydroxystearic acid was prepared from palm based oleic acid and was then solvent purified with isopropyl alcohol in a custom fabricated simultaneous batch crystallizer unit. The crystallized dihydroxystearic acid was a functional ingredient that acted as multipurpose intermediate for synthesis of various fine chemicals, cosmetics and personal care products. The effects of solvent quantity and concentration on particle size distribution, crystal habit and morphology, and resultant crystal purity were studied. The crystals were purer but smaller and the span of the distribution curve was wider at higher solvent quantity and concentration. Through scanning electron microscopy and X-ray diffraction, it was observed that the crystals agglomerated into plate-like (flaky) habit with triclinic crystal structure. Solvent crystallization with 80% IPA at 20 °C and solute:solvent ratio of 1.0:1.0 was the most optimized and efficient, producing β-DHSA crystals that has high resistance against fat exudation during vacuum filtration process.     

Water retention characteristics of coarse porous materials to construct purpose-designed plant growing media

ABSTRACT

Among potential components to construct Technosols for urban greening purposes, the commercially available geogenic coarse porous materials (CPMs) are mainly used in practice because of their high porosity. However, the knowledge of the hydraulic behavior of CPMs as well as of their mixtures with other substrates is limited, provoking their suboptimal usage. Therefore, we determined the water retention characteristics, including the available water capacity (AWC) of six geogenic CPMs: porlith, expanded shale, expanded clay, tuff, pumice, and lava. In order to obtain the water retention characteristics of the CPMs as well as of their mixture with sand (1:4 per volume), the following methods adapted from soil physics were applied over a wide range of pressure heads: Equi-pF apparatus, ceramic tension plates, pressure plate extractors, WP4C apparatus, and water vapor adsorption. The results were used to parametrize the modified Kosugi model (using SHYPFIT 2.0). Porlith and tuff have the highest AWC (0.37 m³ m^?3 and 0.17 m³ m^?3, respectively) and are the only ones which can be recommended as effective water-retaining materials. Further materials exhibit an AWC less than 0.10 m³ m^?3. The CPMs exhibit a bimodal pore size distribution, which can be well described by the applied model, except for pumice and expanded shale. The mixtures present overall low AWCs up to 0.07 m³ m^?3, with the pure sand having less than 0.03 m³ m^?3. For practical application a quite high ratio of CPM is needed, and the mixing material must be adapted to the hydraulic properties of the CPMs. The water inside the CPMs may be easily available for plant roots able to penetrate in the CPMs’ coarse pores.     

Static site indices from different national forest inventories: harmonization and prediction from site conditions

Key message

Static site indices determined from stands’ top height are derived from different forest inventory sources with height and age information and thus enable comparisons and modeling of a species’ productivity encompassing large environmental gradients.

Context

Estimating forest site productivity under changing climate requires models that cover a wide range of site conditions. To exploit different inventory sources, we need harmonized measures and procedures for the productive potential. Static site indices (SI) appear to be a good choice.

Aims

We propose a method to derive static site indices for different inventory designs and apply it to six tree species of the German and French National Forest Inventory (NFI). For Norway spruce and European beech, the climate dependency of SI is modeled in order to estimate trends in productivity due to climate change.

Methods

Height and age measures are determined from the top diameters of a species at a given site. The SI is determined for a reference age of 100 years.

Results

The top height proves as a stable height measure that can be derived harmoniously from German and French NFI. The boundaries of the age-height frame are well described by the Chapman-Richards function. For spruce and beech, generalized additive models of the SI against simple climate variables lead to stable and plausible model behavior.

Conclusion

The introduced methodology permits a harmonized quantification of forest site productivity by static site indices. Predicting productivity in dependence on climate illustrates the benefits of combined datasets.