呼伦贝尔草甸草原群落特征对不同放牧制度的响应

对呼伦贝尔草甸草原划区轮牧和自由放牧两种放牧制度植物群落特征进行了比较研究.结果表明:羊草的密度在自由放牧区显著高于划区轮牧区,高度、盖度不同放牧处理之间差异不明显;贝加尔针茅高度和盖度轮牧区显著高于自由放牧区,密度对照区显著高于两放牧处理区;苔草高度、盖度和密度自由放牧区高于划区轮牧区.Margalef丰富度指数、S...     

尼帕病毒流行病学研究进展

尼帕病是由副黏病毒科中的尼帕病毒引起的新型烈性人畜共患传染病,其严重威胁人类与猪等动物的健康。作者就尼帕病毒的病原学特征、流行病学和临床症状等进行了概述,以期初步了解尼帕病毒。     

非肌肉肌球蛋白Ⅱ型重链A单克隆抗体的制备及其靶位点区域的鉴定

为制备非肌肉肌球蛋白Ⅱ型重链A(NMHC-II A)的单克隆抗体(MAb),本研究将编码NMHC-Ⅱ A羧基端1 651～1 960氨基酸的表达重组质粒转化到大肠杆菌感受态细胞Rosseta中诱导表达,重组蛋白纯化后免疫BALB/c小鼠,分离小鼠脾细胞与SP2/0骨髓瘤细胞用PEG 4000介导融合。ELISA方法检测筛选阳性杂交瘤细胞,制备腹水并纯化MAb,以间接免疫荧光和免疫沉淀方法鉴定MAb的特异性,western blot检测MAb靶位点区域。结果表明,通过筛选得到1株稳定分泌抗体的杂交瘤细胞系,其抗体亚型为IgG1,细胞培养上清和腹水效价分别为1∶2 560和1∶1.0×106;该MAb能够特异性结合相应抗原,并结合Marc-145细胞;western blot结果显示该抗体与NMHC-Ⅱ A的1 812～1 894氨基酸位点结合。该抗体的制备为研究NMHC-Ⅱ A在猪繁殖与呼吸综合征病毒感染细胞中的作用奠定了基础。     

中药复方多糖及其均一组分对雏鸡免疫功能的影响

目的:观察从自拟中药复方免疫增强剂中提取的复方多糖及其均一组分对雏鸡免疫功能的影响。方法:将14日龄健康雏鸡660只随机分为12组,每组55只。分别于15、16、17日龄口服黄芪多糖 环磷酰胺、复方多糖 环磷酰胺、GCPS-1-A-Ⅰ(多糖均一组分Ⅰ) 环磷酰胺、GCPS-2-A-Ⅱ(多糖均一组分Ⅱ) 环磷酰胺、GCPS-3-A-Ⅲ(多糖均一组分Ⅲ) 环磷酰胺、黄芪多糖、复方多糖、GCPS-1-A-Ⅰ、GCPS-2-A-Ⅱ、GCPS-3-A-Ⅲ、生理盐水、肌注环磷酰胺。分别在用药前、用药后7 d、14 d、21 d、28 d、35 d、42 d采血,测定红细胞数量;分别在NDⅣ系疫苗首免后7、14、21 d,二免后7、14、21 d采血、分离血清,测定ND-H I抗体效价。结果:中药复方多糖及其均一组分可使雏鸡红细胞数量、首免和二免后ND-H I抗体效价明显升高,其中以GCPS-2-A-Ⅱ组效果最佳;环磷酰胺可使上述指标明显下降,中药多糖能使环磷酰胺所致免疫抑制逆转至正常水平,复方多糖 环磷酰胺组、GCPS-2-A-Ⅱ 环磷酰胺组、GCPS-1-A-Ⅰ组、GCPS-3-A-Ⅲ组与生理盐水对照组相比差异不显著,复方多糖组、GCPS-2-A-Ⅱ组与黄芪多糖组相比差异显著。结论:中药复方多糖均一组分具有很好的免疫增强作用,但是其纯度与免疫增强效果不成正比。     

An In Vitro Comparison of Hollow Ground and Trocar Points on Threaded Positive-Profile External Skeletal Fixation Pins in Canine Cadaveric Bone

OBJECTIVE: To compare the microstructural damage created in bone by pins with lathe-cut and rolled-on threads, and to determine the peak tip temperature and damage created by positive-profile external fixator pins with either hollow ground (HG) or trocar (T) tips during insertion. STUDY DESIGN: An acute, in vitro biomechanical evaluation. SAMPLE POPULATION: Twenty-seven canine tibiae. METHODS: Lathe-cut thread design with T point (LT-T), rolled-on thread design with T point (RT-T), and rolled-on thread design with HG point (RT-HG) pins were evaluated. Twenty pins of each type were inserted under constant drilling pressure into 12 canine tibiae (12 diaphyseal and 8 metaphyseal sites per pin type). Peak pin tip temperature, drilling energy, end-insertional pin torque, and pullout force were measured for each pin. For the histologic study, five pins of each type were inserted into cortical and cancellous sites in 15 additional tibiae. Entry and exit damage, and thread quality were assessed from 100 micron histologic sections by using computer-interfaced videomicroscopy. RESULTS: T-tipped pins reached higher tip temperature in both diaphyseal and metaphyseal bone compared with HG-tipped pins. RT-T pins had higher pullout strength (diaphyseal) and end-insertional torque compared with other combinations. No differences in drilling energy or insertional bone damage was found between the three pin types (P < .05). CONCLUSIONS: T-tipped pins mechanically outperformed HG-tipped pins. Pin tip and thread design did not significantly influence the degree of insertional bone damage. CLINICAL RELEVANCE: T-tipped pins may provide the best compromise between thermal damage and interface friction for maximizing performance of threaded external fixator pins.     

Nuclear Replacement of In Vitro‐Matured Porcine Oocytes by a Serial Centrifugation and Fusion Method

The objective of the present study was to establish a method for nuclear replacement in metaphase‐II (M‐II) stage porcine oocytes. Karyoplasts containing M‐II chromosomes (K) and cytoplasts without chromosomes (C) were produced from in vitro‐matured oocytes by a serial centrifugation method. The oocytes were then reconstructed by fusion of one karyoplast with 1, 2, 3 or 4 cytoplasts (K + 1C, K + 2C, K + 3C and K + 4C, respectively). Reconstructed oocytes, karyoplasts without fusion of any cytoplast (K) and zona‐free M‐II oocytes (control) were used for experiments. The rates of female pronucleus formation after parthenogenetic activation in all groups of reconstructed oocytes (58.2–77.4%) were not different from those of the K and control groups (58.2% and 66.0%, respectively). In vitro fertilization was carried out to assay the fertilization ability and subsequent embryonic development of the reconstructed oocytes. The cytoplast : karyoplast ratio did not affect the fertilization status (penetration and male pronuclear formation rates) of the oocytes. A significantly high monospermy rate was found in K oocytes (p < 0.05, 61.6%) compared with the other groups (18.2–32.8%). Blastocyst formation rates increased significantly as the number of the cytoplasts fused with karyoplasts increased (p < 0.05, 0.0–15.3%). The blastocyst rate in the K + 4C group (15.3%) was comparable with that of the control (17.8%). Total cell numbers in both the K + 3C and K + 4C groups (16.0 and 15.3 cells, respectively) were comparable with that of the control (26.2 cells). Our results demonstrate that a serial centrifugation and fusion (Centri‐Fusion) is an effective method for producing M‐II chromosome transferred oocytes with normal fertilization ability and in vitro development. It is suggested that the number of cytoplasts fused with a karyoplast plays a critical role in embryonic development.     

Biomechanical Comparison of the Trocar Tip Point and the Hollow Ground Tip Point for Smooth External Skeletal Fixation Pins

Objective —To compare the insertional characteristics of external fixator pins with hollow ground (HG), modified HG, and trocar (T) points.
Study Design —An acute, in vitro biomechanical evaluation.
Sample Population—Thirteen radii from canine cadavers.
Methods —A total of 16 T-tipped and 16 HG-tipped pins were inserted into 8 canine radii. Ten pins of each modification of the HG tip (length of the cutting edge reduced by 0.127 mm and 0.254 mm, respectively) were inserted into another five radii. All pins were inserted with low-speed power drilling and 80 N drilling load. Differences between peak tip temperature, drilling energy, and pullout force were determined for each pin type at both diaphyseal and metaphyseal locations.
Results —HG-tipped pins showed a 40% lower tip temperature in diaphyseal bone, a 25% reduction in drilling energy in diaphyseal bone, and a reduction of pullout force in both diaphyseal (65%) and metaphyseal (50%) bone compared with T-tipped pins. HG 0.254-mm pins generated higher tip temperatures and had greater pullout than HG pins in diaphyseal bone.
Conclusions —The HG tip was a more efficient design; however, the reduction in pullout force suggests that, because a better hole was drilled, radial preload is reduced. Reduction of the cutting edge by 0.254 mm increased the pullout force but also increased the temperatures.
Clinical Relevance —Thermal and microstructural damage are reduced by the HG tip, but pin-bone interface stability is also compromised. The use of a tip with 0.254 mm reduction in the cutting edge may optimize the biological and mechanical factors at the pin-bone interface.     

我国南方草地资源现状及其发展前景

根据我国南方地区自然资源特点、草地类型、利用现状等,总结、分析了南方草地资源的优势、发展潜力和目前所面临的实际问题,并有针对性地提出了不同类型草地资源草产业发展模式。     

THE USE OF FLUFF COUNTS IN A STUDY OF HYGIENE IN QUEENSLAND HATCHERIES

During 1972, 333 fluff samples were tested from 13 Queensland hatcheries and assessed according to the English standards for total count, coliforms and fungi. They were also assessed as being "standard" or "substandard", using a combination of the criteria of the English system. All hatcheries had at least 2 substandard samples and all the samples from 2 hatcheries were substandard.