Application and Advancement of Reinforced Earth Technique

In this paper, the application of reinforced earth technique, principle and calculation method, new reinforced materials developed and produced are introduced. A few of key technical problems in reinforced earth application is discussed, such as reinforced earth behavior, calculation method, durability of reinforced material, amendment and complement of the current standards. Then, the reinforced earth technique development and advancement were introduced.     

Real-time Vehicle Scheduling

The traditional scheduling for vehicle is option in the fixed network. But it can't satisfy the real time environment. The demand of order is changeable and uncertain in real environment. It is convenient for scheduling transforming it into static data, but can't get the advantage on time. This paper proposes a real time vehicle scheduling on the study of traditional scheduling and discusses the model structure and the key technology for the real time system that establishes the base for develop teal time system.     

An Expert Knowledge-acquisition Method on Line of Automatic Excluding Errors

Aimed at soving the problem existing in the knowledge-acquisition directing-operation expert systems, a new method is proposed to acquire knowledge of expert-operation, excluding errors existed in examples and reinforce the accuracy of examples,the goal of knowledge acquisition can be achieved, the method presented in this paper solves the problem of self-enhancement of expert knowledge on line efficiently.     

Analysis on the Constructor Associations Localization

Along with the establishment of the constructor association,how to locate the constructor association is extremely important at present,which is not only related to the efficiency of the constructor trade management,but also related to the future development of the constructor trade.This paper launches the discussion on the constructor association's localization from three aspects,namely the legal localization,the profession localization and the relation localization with the government and its members,and puts forward some proposals and individual opinions.     

FEM on Coupled Hydromechanical Dynamic Response of Geogrid Reinforced Soil Retaining Wall

Geogrid reinforced soil retaining wall(GRSRW) is composed of panel,geogrid and soil,its coupled hydromechanical structural characteristics are increasingly emphasized in practice.In this paper,based on the characteristics of the reinforcement-soil interaction,the grogrid and soil around it with a definite thickness were regarded as a kind of composite material with strain-compatible condition.A saturated porous media model was introduced to simulate the soil and reinforcement-soil composite material hereby and the mathematic model for numerical analysis on structural characteristics of GRSRW was built up.The FEM equations were deduced from the standard Galerkin procedure,resolving these equations,we can gain the relevant dynamic response of saturated GRSRW.     

山羊卵泡卵母细胞的采集及体外成熟效果研究

为了获取高质量的卵泡卵母细胞，提高山羊体外胚胎生产的效率，采用切剖法与抽吸法采集卵泡卵母细胞，并对获得的可用卵母细胞进行了体外成熟培养。结果表明，切剖法能够获得较多的可用卵母细胞，可以明显增加用于体外成熟的卵母细胞数；卵母细胞的体外成熟率与卵泡直径密切相关，大卵泡与中卵泡的卵母细胞成熟率明显高于(P<0.05)小卵泡；山羊卵泡卵母细胞的体外成熟培养液中FCS的添加比例以10% ~ 15%为益。在一定范围内，提高FCS的浓度，并不能提高卵母细胞的成熟率。     

棉花烂铃空间格局及抽样技术研究

本文通过聚集度指标（如：Ｃ、Ｋ、Ｃ＿Ａ、Ｉ、Ｉ＿δ、）测定，以及Ｉｗａｏ’线性回归、Ｔａｙｌｏｒ’ｓＳ￣２一回归和格局纹理分析，结果表明，棉花烂铃空间格而在一切密度下都呈聚集型，且聚集强度随烂铃密度的升高而增加，其空间格局的基本成分是疏松的个体群，其大小约为２～５株棉花，平均约含２．８４个烂铃个体，且个体群内的个体呈随机分布，经μ检验和方差分析，双对角线５点式、棋盘式和平行跳跃式等３种取样方法均适用于棉花烂铃田间调查，尤以双对角线５点式为佳，用双对角线５点式应样法调查的最适抽样数：一般病情普查至少１０个样方（每样方系５株棉花），系统测报和科研调查为２０～３０个样方。最后给出了棉花烂铃平均密度的零频率简易估计模型。     

Modeling soil water dynamics in a drip-irrigated intercropping field under plastic mulch

Intercropping, drip irrigation, and the use of plastic mulch are important management practices, which can, when utilized simultaneously, increase crop production and save irrigation water. Investigating soil water dynamics in the root zone of the intercropping field under such conditions is essential in order to understand the combined effects of these practices and to promote their wider use. However, not much work has been done to investigate soil water dynamics in the root zone of drip-irrigated, strip intercropping fields under plastic mulch. Three field experiments with different irrigation treatments (high T1, moderate T2, and low T3) were conducted to evaluate soil water contents (SWC) at different locations, for different irrigation treatments, and with respect to dripper lines and plants (corn and tomatoes). Experimental data were then used to calibrate the HYDRUS (2D/3D) model. Comparison between experimental data and model simulations showed that HYDRUS (2D/3D) described different irrigation events and SWC in the root zone well, with average relative errors of 10.8, 9.5, and 11.6 % for irrigation treatments T1, T2, and T3, respectively, and with corresponding root mean square errors of 0.043, 0.035, and 0.040 cm³ cm^?3, respectively. The results showed that the SWC in the shallow root zone (0–40 cm) was lower under non-mulched locations than under mulched locations, irrespective of the irrigation treatment, while no significant differences in the SWC were observed in the deeper root zone (40–100 cm). The SWC in the shallow root zone was significantly higher for the high irrigation treatment (T1) than for the low irrigation treatment, while, again, no differences were observed in the deeper root zone. Simulations of two-dimensional SWC distributions revealed that the low irrigation treatment (T3) produced serious severe water stress (with SWCs near the wilting point) in the 30–40 cm part of the root zone, and that using separate drip emitter lines for each crop is well suited for producing the optimal soil water distribution pattern in the root zone of the intercropping field. The results of this study can be very useful in designing an optimal irrigation plan for intercropped fields.     

玉米收获机拉茎辊的改进设计

针对摘穗板-拉茎辊组合式摘穗装置在玉米收获过程中存在的问题,对拉茎辊进行改进设计。改进后的拉茎辊叶片轴采用无缝钢管经模具拉伸成型,整个叶片轴是一体的,叶片棱面为圆弧结构,并且将叶片轴后端与销轴连接的卡槽尺寸加大,加装金属耐磨套。该改进方案解决了传统拉茎辊易开焊、振动大、寿命短等问题。利用Solid Works软件对改进后拉茎辊进行有限元分析得知:应力和最大应变主要分布在拉茎辊后端的U型槽内,最大位移分布在叶片棱上,都在材料的变化范围内,改进方案合理。     

汽车仪表总成终检台系统开发

针对“汽车仪表总成终检台”系统的开发,,论述了系统设计的背景、设计原理和设计思想:该系统应用于汽车仪表总成出厂前的各项性能测试,并把实测的各项指标存放于数据库中,使得产品的可追溯性得以实现,它对国产汽车仪表总成的各项性能检测趋于科学化、规范化、批量化,使其能达到国际汽车工业的同等水平。