An approximately 15,000-year record of El Nino-driven alluviation in southwestern ecuador

Debris flows have deposited inorganic laminae in an alpine lake that is 75 kilometers east of the Pacific Ocean, in Ecuador. These storm-induced events were dated by radiocarbon, and the age of laminae that are less than 200 years old matches the historic record of El Nino events. From about 15,000 to about 7000 calendar years before the present, the periodicity of clastic deposition is greater than or equal to 15 years; thereafter, there is a progressive increase in frequency to periodicities of 2 to 8.5 years. This is the modern El Nino periodicity, which was established about 5000 calendar years before the present. This may reflect the onset of a steeper zonal sea surface temperature gradient, which was driven by enhanced trade winds.     

Evaluation of slice shear force as an objective method of assessing beef longissimus tenderness.

Experiments were conducted to develop an optimal protocol for measurement of slice shear force (SSF) and to evaluate SSF as an objective method of assessing beef longissimus tenderness. Whereas six cylindrical, 1.27-cm-diameter cores are typically removed from each steak for Warner-Bratzler shear force (WBSF) determination, a single 1-cm-thick, 5-cm-long slice is removed from the lateral end of each longissimus steak for SSF. For either technique, samples are removed parallel to the muscle fiber orientation and sheared across the fibers. Whereas WBSF uses a V-shaped blade, SSF uses a flat blade with the same thickness (1.016 mm) and degree of bevel (half-round) on the shearing edge. In Exp. 1, longissimus steaks were acquired from 60 beef carcasses to determine the effects of belt grill cooking rate (very rapid vs. rapid) and conditions of SSF measurement (hot vs cold) on the relationship of SSF with trained sensory panel (TSP) tenderness rating. Slice shear force was more strongly correlated with TSP tenderness rating when SSF measurement was conducted immediately after cooking (r = -.74 to -.76) than when steaks were chilled (24 h, 4 degrees C) before SSF measurement (r = -.57 to -.72). When SSF measurement was conducted immediately after cooking, the relationship of SSF with TSP tenderness rating did not differ among the belt grill cooking protocols used to cook the SSF steak. In Exp. 2, longissimus steaks were acquired from 479 beef carcasses to compare the ability of SSF and WBSF of 1.27-cm-diameter cores to predict TSP tenderness ratings. Slice shear force was more strongly correlated with sensory panel tenderness rating than was WBSF (r = -.82 vs -.77). In Exp. 3, longissimus steaks were acquired from 110 beef carcasses to evaluate the repeatability (.91) of SSF over a broad range of tenderness. Slice shear force is a more rapid, more accurate, and technically less difficult technique than WBSF. Use of the SSF technique could facilitate the collection of more accurate data and should allow the detection of treatment differences with reduced numbers of observations and reduced time requirements, thereby reducing research costs.     

Evaluation of the ovine callipyge locus: III. genotypic effects on meat quality traits.

A resource flock of 362 F2 lambs provided phenotypic and genotypic data to estimate effects of callipyge (CLPG) genotypes (NN, NC, CN, and CC) on meat quality traits. The mutant allele is represented as C, the normal allele(s) as N, and the paternal allele of a genotype is given first. Lambs of each genotype born in 1994 and 1995 were serially slaughtered in six groups at 3-wk intervals starting at 23 wk of age. Warner-Bratzler shear force and subjective evaluation of marbling were collected during both years from longissimus. Calpastatin activity was measured on longissimus from the 1994 group, and ELISA quantification of calpastatin protein was obtained from the 1995 group. Significant additive and paternal polar overdominance effects on meat quality traits were detected. This is in contrast to previous research that detected only polar overdominance effects on slaughter and carcass traits in this population. The magnitude of genotypic effects on shear force differed significantly between years; however, additive (P < .01), paternal polar overdominance (P < .001), and maternal dominance (P < .01) effects adjusted for variation in carcass weight were detected within each year. Shear force data adjusted to the mean slaughter age or carcass weight indicated that the means and variances of CN and CC genotypes were greater than values of NC and NN. Shear force values were greatest for CN and were intermediate for CC. The difference in shear force (adjusted for variation in slaughter age) between homozygous genotypes (additive effect) was supported by calpastatin activity data with 2-df F-tests of 3.66 (P < .05) and 11.84 (P < .001) at d 0 and 7 postmortem, respectively. Corresponding values for the paternal polar overdominance effects on calpastatin activity were 53.80 (P < .001) and 87.43 (P < .001). Calpastatin ELISA data (d 0, adjusted for slaughter age) exhibited a paternal polar overdominance effect exclusively with a 2-df F-test of 57.63 (P < .001). Additive and paternal polar overdominance effects on marbling adjusted for slaughter age had F-tests of 6.41 (P < .01) and 93.29 (P < .001), respectively. Consequences of increased longissimus shear force must be addressed if the advantages of CN lambs for dressing percentage and carcass composition are to be realized. Further research is needed to establish whether selection targeted at changing the background genome can mitigate the negative effects of the C allele on meat tenderness.     

Exogenous DNA Uptake of Boar Spermatozoa by a Magnetic Nanoparticle Vector System

The sperm‐mediated gene transfer method is applicable to transgenesis in many species that use spermatozoa for reproduction recently, which has been shown various results. In the current study, we show that transgenic porcine embryos can be efficiently produced by employing a simple transfection method that uses magnetic nanoparticles (MNPs). The complexes formed between plasmid DNA and MNPs were bounded on ejaculated boar spermatozoa at a higher efficiency compared to methods using DNA alone or lipofection. Using confocal microscopy, rhodamine fluorophore‐labelled MNPs were detected on external surfaces of the spermatozoa membrane, which were bounded on zona pellucida of in vitro maturated oocyte during in vitro fertilization. Electron microscopy revealed that clusters of MNPs were detected in inside of plasma membrane and nucleus of the spermatozoa head. Additionally, we found that magnetofected boar spermatozoa could be fertilized with oocytes in vitro and that the resulting gene of green fluorescent protein was detected in fertilized eggs by genomic PCR analysis. Taken together, these results suggest that MNPs can be used to efficiently introduce a transgene into embryo via spermatozoa.     

Use of visible and near-infrared spectroscopy to predict pork longissimus lean color stability

This study evaluated the use of visible and near-infrared (VISNIR) spectroscopy to predict lean color stability in pork loin chops. Spectra were collected immediately after and approximately 1 h after rib removal on 1,208 loins. Loins were aged for 14 d before a 2.54-cm chop was placed in simulated retail display. Spectra were collected on aged loins immediately after removal from the vacuum package and on chops 10 min after cutting. Instrumental color measurements [L*, a*, b*, hue angle, chroma, and E (overall color change)] were determined on d 0, 1, 7, 11, and 14 of display. Principal components analysis of display d 0 and 14 values of these traits identified a factor (first principal component; PC1) explaining 67% of the variance that was related to color change. Partial least squares regression was used to develop 3 models to predict PC1 values by using VISNIR spectra collected in the plant, on aged loins, and on chops. Loins with predicted PC1 values less than 0 were classified as having a stable color, whereas values greater than 0 were classified as having a labile lean color. Loins classified as stable by the in-plant model had smaller (P < 0.05) L* values than those classified as labile. Hue angle and ΔE values were less (P < 0.05) and a* and chroma values were greater (P < 0.05) after d 7 of display in loins predicted to have a stable color than in loins predicted to have a labile lean color. Similarly, chops from loins classified as stable using the aged loin model had smaller (P < 0.05) L* values than those from loins classified as labile. Furthermore, loins predicted to be stable had smaller (P < 0.05) hue angle and ΔE values and greater (P < 0.05) a* and chroma values after d 7 of display than did loins predicted to be labile. Results for the chop model were similar to those from the 2 loin models. Chops predicted to have a stable lean color had smaller (P < 0.05) L* values than did those predicted to have a labile lean color. Chops classified as stable had smaller (P < 0.05) hue angle and ΔE values and greater (P < 0.05) a* and chroma values after d 7 of display compared with chops classified as labile. All 3 models effectively segregated chops based on color stability, particularly with regard to redness. Regardless of the model being used, d 14 display values for a*, hue angle, and ΔE in loins classified as stable were similar to the d 7 values of loins classified as labile. Thus, these results suggest that VISNIR spectroscopy would be an effective technology for sorting pork loins with regard to lean color stability.     

Retail cut yields of Rambouillet wether lambs fed the beta-adrenergic agonist L644,969.

Twenty Rambouillet wether lambs were given ad libitum access to a diet with (BAA, n = 10) or without (control, n = 10) 1 ppm of the beta-adrenergic agonist L644,969. Lambs were fed to a constant slaughter weight end point of 54.5 kg. Carcasses were fabricated to yield bone-in and boneless cuts that were trimmed progressively to 1.27, .64, .32, and .00 cm of s.c. fat remaining. Addition of BAA did not affect growth traits. Actual and adjusted fat thickness, body wall thickness, and percentage of kidney-pelvic fat did not differ between control and BAA lambs. However, BAA increased longissimus muscle area, longissimus muscle depth, and leg score while decreasing USDA yield grade. The BAA increased carcass conformation scores and decreased flank lean color scores. No other carcass quality measurements were affected by BAA. Addition of BAA did not affect overall carcass yields of bone-in retail cuts. However, BAA increased overall carcass yields of boneless retail cuts regardless of fat trim level. The BAA increased bone-in leg yield. Yield of boneless sirloin, bone-in loin and boneless loin were not affected by BAA. For these cuts, the percentage change from the control was highly dependent on fat trim level. There was no difference in short-cut, shank-off, semiboneless leg yield between control and BAA. Addition of BAA did not affect yield of bone-in rack regardless of fat trim level. However, BAA greatly increased yield of boneless ribeye. The BAA did not affect yield of bone-in or boneless shoulder.(ABSTRACT TRUNCATED AT 250 WORDS)     

Technical note: use of belt grill cookery and slice shear force for assessment of pork longissimus tenderness

The present experiments were conducted to determine whether improved beef longissimus shear force methodology could be used to assess pork longissimus tenderness. Specifically, three experiments were conducted to: 1) determine the effect of belt grill (BG) cookery on repeatability of pork longissimus Warner-Bratzler shear force (WBSF), 2) compare the correlation of WBSF and slice shear force (SSF) with trained sensory panel tenderness ratings, and 3) estimate the repeatability of pork longissimus SSF for chops cooked with a BG. In Exp. 1 and 2, the longissimus was removed from the left side of each carcass (Exp. 1, n = 25; Exp. 2, n = 23) at 1 d postmortem and immediately frozen to maximize variation in tenderness. In Exp. 1, chops were cooked with either open-hearth electric broilers (OH) or BG, and WBSF was measured. Percentage of cooking loss was lower (P < 0.001) and less variable for chops cooked with a BG (23.2%; SD = 1.7%) vs. OH (27.6%; SD = 3.0%). Estimates of the repeatability of WBSF were similar for chops cooked with OH (0.61) and BG (0.59). Although significant (P < 0.05), differences in WBSF (4.1 vs. 3.9 kg) between cooking methods accounted for less than 5% of the total variation in WBSF. In Exp. 2, the correlation of SSF (r = -0.72; P < 0.001) with trained sensory panel tenderness ratings was slightly stronger than the correlation of WBSF (r = -0.66; P < 0.001) with trained sensory panel tenderness ratings, indicating that the two methods had a similar ability to predict tenderness ratings. In Exp. 3, duplicate samples from 372 carcasses at 2 and 10 d postmortem were obtained, cooked with BG, and SSF was determined. The repeatability of SSF was 0.90, which is comparable to repeatability estimates for beef and lamb. Use of BG cookery and SSF could facilitate the collection of accurate pork longissimus tenderness data. Time and labor savings associated with BG cookery and the SSF technique should help to decrease research costs.