An improved shear lag model for predicting stress distribution in hybrid fiber reinforced rubber composites

An improved micromechanical shear lag model, which considers the interphase and bonded fiber end, is developed to investigate the load-carrying characteristics and stress profiles in hybrid aramid/sepiolite fiber reinforced rubber composites. The properties of the equivalent matrix, which is combination of sepiolite fiber and rubber matrix, are determined by Mori-Tanaka method. The axial and shear stresses at the fiber end are resolved by the imaginary fiber technique. The results obtained from the improved model show the tensile stress has a maximal at the real fiber center and the interfacial shear stress has a maximal at the end of the real fiber. Comparing with the results from Tsai’s model, the improved model has a better agreement with the numerical simualtion results. The effects of the imaginary fiber length on the stress transfer are analyzed and the results show that the effects can be ignored when the imaginary fiber length is greater than twice of the fiber radius. The effects of interphase modulus and thickness on the maximal axial and shear stresses are discussed. The results show that the interphase modulus and thickness of about 106.3 MPa and 0.2 μm are optimal to prevent interfacial debonding and improve the strength of hybrid fiber reinforced rubber composites.     

Nitrogen loading levels affect abundance and composition of soil ammonia oxidizing prokaryotes in semiarid temperate grassland

Purpose  

Global nitrogen deposition has profound impact on the terrestrial ecosystem including the semiarid temperate grassland, causing vegetation community shifts and soil acidification. Little is known regarding the effect of nitrogen (N) deposition on the belowground microbial communities. This study aimed to examine the response of ammonia-oxidizing bacteria (AOB) and archaea (AOA) to added N in semiarid temperate grassland.     

Major nutrients,heavy metals and PBDEs in soils after long-term sewage sludge application

Purpose

Two contrasting soils receiving long-term application of commercial sewage sludge fertilizers in China were investigated to determine the concentrations of selected nutrients, heavy metals (HMs) and polybrominated diphenyl ethers (PBDEs) present to evaluate the impact of sewage sludge fertilizer on soil fertility and environmental risk.

Materials and methods

Soil samples were collected from Tangshan City, Hebei province and Ningbo City, Zhejiang province and divided into two portions, one of which was air-dried and sieved through 2-, 0.25- and 0.149-mm nylon mesh for determination of nutrients and heavy metals. The other portion was frozen at ?20°C, freeze-dried and sieved through 2-mm nylon mesh for PBDE analysis. The concentrations of nutrients, heavy metals and PBDEs were determined in all samples.

Results and discussion

Concentrations of nutrients and heavy metals in soils amended with low rates of sewage sludge fertilizer (SSF) and conventional fertilizer were compared. After long-term excessive amendment with SSF from Ningbo City (SSF-N), the concentrations of soil total N, P, aqua regia-extractable HMs and DTPA extractable HMs were higher than the control, especially in the arable layer. Moreover, the concentration of aqua regia-extractable Zn (457 mg kg^?1) exceeded the recommended China Environmental Quality Standard for soils (GB15618-1995). All 8 target PBDE congeners were found in fertilizer SSF-N and soil with excessive amendment with SSF-N for 12 years, but the concentrations of 8 different PBDEs in SSF-N-amended soil were not significantly different from control soil.

Conclusions

Both economic and environmental benefits can be obtained by careful application of sewage sludge fertilizer to recycle plant nutrients. Repeated and excessive application rates of sewage sludge fertilizer may pose environmental risk, especially in respect of soil heavy metal and PBDE contamination, and high concentrations of phosphorus may also be environmentally detrimental.

     

Xylem traits in European beech (Fagus sylvatica L.) display a large plasticity in response to canopy release

Key message

The position of trees in the canopy impacts xylem structure and its inter-annual variation. After canopy release, the increase in the hydraulic conductivity of growth rings was driven by an increase in radial growth in large trees, and by both an increase in radial growth and changes in xylem structure in saplings.

Context

Forest canopies are frequently subjected to disturbances that allow understory trees to access the upper canopy. The effect of canopy release on xylem anatomy has been assessed in juvenile trees and saplings, while the potential acclimation of larger trees remains poorly documented.

Aims

We estimated the potential hydraulic conductivity of growth rings in large understory trees compared to overstory trees, and evaluated the responses to canopy release in large trees and in saplings.

Methods

We recorded radial growth, wood density, and vessel structure in beech trees according to their position within the canopy and their size. Xylem traits were followed during 6 years after canopy release for large trees, and during 2 years for saplings. Vessel diameter and frequency as well as ring area were used to compute the potential annual ring hydraulic conductivity.

Results

Large understory trees displayed lower radial growth increments and lower potential annual ring hydraulic conductivity than overstory trees. After canopy release, potential annual ring hydraulic conductivity increased in large trees, due exclusively to increased radial growth without any change in specific hydraulic conductivity. It increased in saplings due to both increased radial growth and increased specific conductivity.

Conclusion

Tree size impacted xylem structure and resulted in plasticity of the potential hydraulic conductivity of the annual tree ring following canopy release.

     

Culture of juvenile European lobster (<Emphasis Type="Italic">Homarus gammarus</Emphasis> L.) in submerged cages

A bottleneck for re-establishment or enhancement of lobster (Homarus gammarus L.) populations through release of hatchery-produced juveniles is ineffective and expensive juvenile production. In this study, we cultured lobster juveniles from stage V to a size being suitable for re-establishment or enhancement purposes (40–50 mm total length) in cages submerged under existing facilities for culture of bivalves. The lobsters were not feed or tended during the culture period (6–14 months). The survival and growth rates were similar or higher compared to what has been achieved with other methods used for culture of lobster juveniles in the past. The highest survival (82–89%) and fastest growth (4–5 cm total length over 190–250 days) were achieved using commercial oyster baskets. It is believed that the juveniles fed on naturally occurring plankton and organisms growing inside the cages. Thus, the current study shows that it is possible to culture lobster juveniles for reestablishment or enhancement purposes in a way that would involve less investments and operational costs than earlier used methods as there would be no need for artificial heating of water, for large buildings or for continuous feeding and tending of large numbers of juveniles.     

One-Bath Union Dyeing of Wool/Acrylic Blend Fabric with Cationic Reactive Dyes Based on Azobenzene

Three unreported cationic reactive dyes based on azobenzene were synthesized using a novel synthetic route. Synthesized dyestuffs containing three primary color dyes were characterized by FTIR, H-NMR, LC-MS, Element Analysis and UV-vis spectroscopic techniques. The absorption spectra of dyes were measured in three solvents with different polarities. The dyeing and color fastness properties of three cationic reactive dyes on wool, acrylic and wool/acrylic blend fabrics were determined. The optimum pH for wool and acrylic fabrics were 6 and 5, respectively. Effect of temperature, time on dyeing properties and color fastness properties on wool fabric showed the same tendency with acrylic fabric. The K/S value of wool fabric dyed with three dyes was similar to that of acrylic fabric when both fabrics were dyed simultaneously in the same dyebath using low dye concentration. Wool/acrylic blend fabric dyed with three cationic reactive dyes using onebath one-step method achieved good union dyeing property and excellent color fastness.     

Detection of Tobamoviruses from Soils by Non-precoated Indirect ELISA

A method for detecting tobamoviruses from field soils was developed using non-precoated indirect enzyme-linked immunosorbent assay (Id-ELISA). Absorbance values in Id-ELISA were relatively low after directly applying Pepper mild mottle virus (PMMoV)-infested soil extract. However, heat treating the soil extract before application greatly enhanced the absorbance values. The heat treatment was essential for the Id-ELISA detection of tobamoviruses from infested soil, although the efficiency of virus recovery varied depending on the properties of soil. The number of local lesions in the infectivity assay was consistent with the absorbance values in Id-ELISA. Moreover, the absorbance values in Id-ELISA were correlated with the incidence of soil transmission of PMMoV. Thus, Id-ELISA combined with heat treatment is a practical technique for the diagnosis of infestation with Tobamovirus in field soils, Gray Lowland soil and Sand-dune Regosol. Received 4 October 1999/ Accepted in revised form 9 December 1999     

Tracing Pharmaceuticals in the Unsaturated Zone (10 pp)

Background, Aim and Scope   One of the first occurrences of pharmaceutically active compounds in groundwater was reported from the sewage irrigation farms south of Berlin. At these sewage irrigation farms treated sewage effluent passed the soil and unsaturated zone before reaching the aquifer. Clofibric acid was detected in pore water from soils of those sewage irrigation farms in concentrations between 65 ng/L and 1430 ng/L. The aim of this study was to investigate the transport behavior of regularly detected clofibric acid, diclofenac, ibuprofen, and propyphenazone under conditions comparable to those at the sewage irrigation farms in a multiple compound sand column laboratory experiment. Materials and Methods   Sediment column experiments were conducted to study the transport of pharmaceuticals in the unsaturated zone. The migration was measured in fine to medium grained sand and leaching solution containing 1 mg/L of pharmaceutically active compounds and 61 mg/L of the tracer lithium chloride (LiCl). For the analysis of the pharmaceutical compounds the water samples were adjusted to a pH value of 2 and then extracted by solid-phase extraction (SPE). Before extraction, the samples were spiked with a surrogate standard for analytical quality control. The sample extracts were analyzed by capillary gas chromatography-mass spectrometry (GC-MS) with selected ion monitoring (SIM). Depending on the sample volume (100 to 200 mL) and the matrix, the limits of detection were between 1 and 10 ng/L, and the limits of quantitation were between 5 and 25 ng/L. Analysis for calcium, magnesium and lithium were carried out using a 'Trace Scan' ICP-AES from Thermo Jarrel Ash. Sodium, potassium, iron and manganese were analyzed using a Philips PU 9400 flame AAS. Analysis of anions was performed on a Dionex ion chromatograph DX 120. Results   At the sewage irrigation farms the average concentrations of clofibric acid in the unsaturated zone declined from higher values near ground surface (480 ng/L) to lower values near the groundwater table (65 ng/L). From the pharmaceuticals analyzed only clofibric acid, primidone and propyphenazone could be analyzed in the first (upper) aquifer at the sewage irrigation farms. All other pharmaceuticals could neither be detected in the first aquifer nor in the deeper aquifers. Breakthrough curves from soil column experiments revealed no transformation and no retardation for clofibric acid, whereas transformation of diclofenac was so high (79%) that no retardation factor could be calculated. Ibuprofen was significantly transformed (37%), transformation of propyphenazone (17%) was quite low and retardation (Rf = 2.05) was in the range of previously conducted column experiments. Discussion   The results confirm previously conducted experiments with clofibric acid where this compound was identified as highly mobile and persistent. The results that diclofenac and ibuprofen are significantly transformed where unexpected as other studies exhibited much lower transformation under saturated conditions at least for diclofenac. However, lower pH values and higher oxygen contents in the unsaturated zone compared to the aquifer may explain this observed high transformation of these compounds at the column experiments. Conclusions   We conclude that irrigation with sewage effluent containing the compounds used in our experiments will lead to an input into groundwater of clofibric acid, whereas diclofenac and ibuprofen will most likely be transformed during the passage. Propyphenazone will be retarded but will most likely occur in groundwater. These results from the column experiments coincide very well with the occurrence of the pharmaceuticals clofibric acid, primidone, and propyphenazone in the first aquifer. Recommendations and Perspective  : The results underline the need to study the sorption of pharmaceuticals on various materials. e.g. organic matter, surfaces at pH values occurring in the unsaturated zone. Future field studies will also include the investigation of desorption behavior in the unsaturated zone.     

Effectiveness of crop straws,and swine manure in ameliorating acidic red soils: a laboratory study

Purpose

Crop straws and animal manure have the potential to ameliorate acidic soils, but their effectiveness and the mechanisms involved are not fully understood. The aim of this study was to evaluate the effectiveness of two crop (maize and soybean) straws, swine manure, and their application rates on acidity changes in acidic red soils (Ferralic Cambisol) differing in initial pH.

Materials and methods

Two red soils were collected after 21 years of the (1) no fertilization history (CK soil, pH 5.46) and (2) receiving annual chemical nitrogen (N) fertilization (N soil, pH 4.18). The soils were incubated for 105 days at 25 °C after amending the crop straws or manure at 0, 5, 10, 20, and 40 g kg^?1 (w/w), and examined for changes in pH, exchangeable acidity, N mineralization, and speciation in 2 M KCl extract as ammonium (NH₄⁺) and nitrate plus nitrite (NO₃^??+?NO₂^?).

Results and discussion

All three organic materials significantly decreased soil acidity (dominated by aluminum) as the application rate increased. Soybean straw was as effective (sometimes more effective) as swine manure in raising pH in both soils. Soybean straw and swine manure both significantly reduced exchangeable acidity at amendment rate as low as 10 g kg^?1 in the highly acidic N soil, but swine manure was more effective in reducing the total acidity especially exchangeable aluminum (e.g., in the N soil from initial 5.79 to 0.50 cmol₍₊₎ kg^?1 compared to 2.82 and 4.19 cmol₍₊₎ kg^?1 by soybean straw and maize straw, respectively). Maize straw was less effective than soybean straw in affecting soil pH and the acidity. The exchangeable aluminum decreased at a rate of 4.48 cmol₍₊₎ kg^?1 per pH unit increase for both straws compared to 6.25 cmol₍₊₎ kg^?1 per pH unit from the manure. The NO₃^??+?NO₂^? concentration in soil increased significantly for swine manure amendment, but decreased markedly for straw treatments. The high C/N ratio in the straws led to N immobilization and pH increase.

Conclusions

While swine manure continues to be effective for ameliorating soil acidity, crop straw amendment has also shown a good potential to ameliorate the acidity of the red soil. Thus, after harvest, straws should preferably not be removed from the field, but mixed with the soil to decelerate acidification. The long-term effect of straw return on soil acidity management warrants further determination under field conditions.

     

Sample size and power determination for detecting interactions in mixtures of chemicals

In the analysis of mixtures of drugs/chemicals it is often of interest to test for the presence of interaction. If the hypothesis of no interaction (additivity) is not rejected, then the analyst may reasonably claim additivity if and only if the study is powered to a desired (e.g., biologically meaningful) level. The objective of this article is to address the sample size and power issues related to testing the hypothesis of additivity at specified mixture points. The study of disinfectant by-products (DBPs) found in drinking water, described in earlier literature, is used to illustrate the procedures for estimating power and sample sizes for detecting interactions at specified mixtures. The four trihalomethanes used in the study are bromodichloromethane (BDCM), chlorodibromomethane (CDBM), chloroform (CHCl₃), and bromoform (CHBr₃)