Design of Preparation of High Grade WC Powder from Voilet WO2.72

Synthesis of W powder by oxide reduction method and fabrication of WC powder by carbonization of W powder are investigated, using violet and blue tungsten oxides as the raw materials, respectively, for the preparation of excellent high grade WC powder. Microstructure and properties of the two raw materials and the obtained W powders and WC powders are studied. The results show that violet tungsten is a suitable raw material for synthesizing uhrafine W powder using the conventional method. The W and WC powders produced from the violet tungsten oxide have better physical properties than those produced from blue tungsten oxide.     

Identification of Minibus''s Surface Noise Source

With the study of minbus's accelerated exterior noise control,the principle of sound intensity measurement was applied,the sound intensity of a minbus's surface noise was tested,and the surface noise distribution was presented.Several identification of noise source methods including sound power,sound intensity contour map,frequency spectrum were used together for surface noise analysis and study.Engine radiation noise and exhaust noise was identified as the major noise sources.On the contrary,car body vibration noise,tyre noise,transmission agent noise,air admission noise just occupied a little proportion of surface sound radiation energy.The research provides the reliable basis to determine main projects of minibus's accelerated exterior noise control.     

Analysis of Radial Forces on the Seal Block in a Compound Gear Pump with 3 Idle Gears

By analyzing the pressure distribution between gears and sealing blocks in compound gear pump with three idlers,the resultant hydraulic forces acting on seal blocks are obtained.The conclusion is the unbalanced resultant hydraulic forces are relatively small in magnitude.In the pump,the inner sealing edges are long and so it s Sealing effect is good,but the outer sealing effect is relatively poor because of its short sealing edges.The little unbalanced force pushes the sealing block to te pumping chamber,therefore it is advantageous to meliorating the pump's sealing effect,thereby to improving it's volumetric efficiency as well.     

Parameter Simulation on the Control Strategy for a Parallel Hybrid Electric Vehicle by CRUISE

The purpose of a parallel hybrid electric vehicle(PHEV) is for the best energy distribution between internal-combustion engine(ICE) and electric motor though the appropriate control strategy.It can not only keep the advantage of the ultra-low emission of electric vehicles(EV),but also take advantages of the hyperbaric energy of ICE.Simulation model for PHEV is built based on CRUISE,an auxiliary control strategy is designed,and then parameter simulation study on the control strategy is performed.The simulation results show that according to the different control requirements,the vehicle performance can be improved by adjusting!the corresponding control parameters.     

Statistical Model on the Time and Time Difference Error of Arrival in TDOA Location Estimation

Additional time delay of arrival resulted from non-line of sight(NLOS)propagation and muti-path effect in(cellular) environment is the dominant factor resulting in TDOA location error,study on the statistical property of TDOA error is useful for improving the accuracy of TDOA location.Based on the exponential distribution property of NLOS propagation delay,and considering the system error resulted from the signal detection,the authors establish a statistical model of arrival time and a model of TDOA error distribution by statistics when non-light of sight and multi-path propagation exist.The models reflect the statistical property of arrival time and TDOA error in cell network,the simulation shows that the proposed models have a good accuracy and a satisfactory behavior.     

Slab Defect Diagnosis and Predicting System Based on Rough Set Theory

In accordance with the special characteristics of state medium-sized construction enterprises and their reform objects of "having a free hand and enlivening", the suitable objective model, the stock cooperative system for state medium-sized construction enterprises has been put forward in this paper by analyzing the system mechanism of stock cooperative system enterprises. Then the causes for it were expounded.     

Control of Sweeper and Anti-jamming Measures

Sweeper is a machine, which can clean up rubbish on the road surface with functions like drizzling, sweeping and sucking rubbish. Aiming at control of sweeper, the author introduced analyses on the theory of software and hardware of the system and their design using single chip computer (8752BH) as the core of control system. At the same time, the authors expatiated some anti-jamming measures, discussed the measures from the points of restraining electromagnetic noise, hardware and software anti-jamming to enhance the reliability of the control system.     

A Multi-agent Fault Diagnosis System of Rotating Machinery Based on CBR

Recently,distributed intelligent systems based on multi-agent have been applied to many fields successfully.the multi-agent technique is introduced into the rotating machinery fault diagnosis system.With the combination of CBR technique,Basalstructure and development approach of the system are analyzed,and better cooperation among agents is realized.As a result,the system overcomes the limitation of single fault diagnosis method,and solves the contradictionbetween versatilityand adaptabilityof diagnosis software.Furthermore,a reference can be used for the research and development of multi-algorithmdiagnosis system of rotating machinery.The application in a factory's Networked Online Monitoring and Fault Diagnosis System for Turbine Fan shows that the system can diagnosefault rapidly and exactly.     

Asymmetric Exhaustive Service Polling System with Bernoulli Feedback

This paper studies asymmetric exhaustive service polling system with Bernoulli feedback,gives the distributions of queue lengths and sojoun times,and obtains some other results,in stationary condition.     

Application of Attribute Reduct Method in Spatial Load Forecasting

Spatial load forecasting is a process distributing the total forecasted load to all partitioned area, and involving more spatial information and more factor influencing application of the future small area, which need a great deal of memory space and longer operation time. Rough set is new method of data analysis. It need not be provided with any advanced information except data set. But attribute reduct is its main algorithms. Division matrix approach on rough set used to reduce the attribute related to land - use decision in order to remove redundancy attribute and then the rules of small area land - use decision is distilled. The method obtained better effect and enhanced the total load forecasting efficiency.