Analysis of embedded gas detection system based on nano-porphyrin arrays

In view of the necessity of gas detection in environment, an embedded gas detection system is designed based on the basic principles of chromatography change of chemical reaction between nano-porphyrin arrays and micro-gas, which takes ARM9 S3C2440A as the core and nano-porphyrin array as the sensors. The overall program, the circuit organization and control software of the main function module such as spectrum signal acquisition, processing and monitoring are presented. With energy conservation differential equation, the control model of temperature and flow rate in the sample chamber is established, which can precisely control the detection conditions of chemical sensors. Some typical trace gases such as ammonia, enanthaldehyde, cyclohexane and hexanal are tested by the system, and the results show that the system can achieve rapid and accurate detection of trace volatile gas.     

Numerical Prediction of Frequency of Delaminated Advanced Grid Stiffened plate

The paper aims to investigate natural frequency of delaminated advanced grid stiffened composite plates by hump resonance method.The composite laminated plate element and the rib element are adapted to simulate the laminated plate and the ribs.Based on the composite laminated plate and beam element model considering first-order shear effect,a damping model on the basis of Rayleigh damping model in conjunction with Adams' strain energy method(MSE) and a Hertz nonlinear dynamic contact model to avoid the overlap and penetration phenomenon between the upper and lower sub-laminates at the delaminated region.A numerical analysis method of dynamic response for the delaminated composite plates is carried out by precise time-integration method,and then the natural frequencies are achieved when the dynamic deflections reach the hump peak.For the frequency-domain analysis provided in the former research papers,it is a difficult problem to avoid the embedded phenomenon in the mode shapes at the delamination zone,while in the current time-domain analysis,the embedded phenomenon can be successfully overcome by using nonlinear contact model.By vibration excitation test,the specimens were excited by different excited frequency and the amplitude frequency response characteristics obtained are used to extract the frequency.The extracted frequencies of the narrow delaminated composite plates measured,which agrees well with the predicted natural frequencies.     

Application of Multi-vertical-line-element Model of RC Walls and Discussion on IT

The inelastic dynamic response analysis program for frame-shear wall structures developed by the authors is introduced firstly, in which the multi-vertical-line-element model was adopted for shear walls and the refined single-component model was used for beams and columns in frame.By analyzing three-story structural models tested in shaking-table in a famous foreign research institute, the validity of the modeling of shear wall in the program was verified. The analytical results indicate that the inelastic dynamic responseof shear walls under random ground motion input can be predicted effectively withthe program. Finally, with the preliminary discussion of some key points in modeling of shear wall, some suggestions areput forward for further improving and refining the multi-vertical-line-element model.     

HRT Effects on Biological Nutrient Removal in Spiral Up-flow Reactor System

Overall effects of HRT ( 11 h, 9 h, 8 h, 6 h ) on the Spiral up-flow reactor (SUFR) system are analyzed. The results of the operation under different HRT condition shows that the removal efficiencies of COD, TN and TP decreased not obviously with decreasing HRT when HRT is longer than 8h. Anaerobic retention time, anoxic retention time and aerobic retention time were 1.51 h,2.25 h and 4.24 h,respectively. The removal efficiencies of COD, TN and TP is kept over 93%,87% and 90.2%, respectively. Although the removal efficiencies changed obviously when the HRT was 6 h. Anaerobic retention time, anoxic retention time and aerobic retention time are 1.13 h,1.69 h and 3.18 h,respectively. COD-removal efficiency is always up to 85%, the removal efficiencies of TN and TP is kept over 76% and 72%,also has upper removal efficiencies. It is indicated that the SUFR system, which is similar to plug-flow-reactor, has strong stability and can compensate negative effects of increasing hydraulic loading.     

胡麻枯萎病病原尖孢镰刀菌生态生物型的划分研究

通过酯酶同工酶技术将来自中国主要胡麻产区内蒙古、山西、河北、甘肃的17个枯萎病菌株划分4个酯酶型，同时对部分菌株采用人工室内接种同一胡麻材料后的病情进行分析，考察菌株问的致病性。结果表明：同一地区的菌株属于同一酯酶型，同一地区的菌株间的致病性差异不显著，不同地区菌株问的致病性差异显著。     

Study on high and steep slope stability Based on 3D laser scanning

Dangerous mountain construction projects block of high and steep slope stability is the important issue of security and disaster prevention, investigation on the surface of the dangerous mountain high and steep slope rock mass structure is the key to the analysis of the problem. The high slope of a major project of the Lancang River, the application of 3D laser scanning technique to study the long-distance survey analysis of rock mass structure analysis method to analyze the distribution of the surface space of the high and steep slope rock mass structure, statistical analysis direction of the advantages of the structure surface and the distribution of rock blocks, as the basis for the application of limit equilibrium analysis method to study the stability of rock blocks of the high and steep slope.     

青梅酒加工工艺及产品功能性研究进展

综述了青梅酒的加工工艺、产品功能性的研究现状;提出了有待解决的问题和今后研究与发展的方向,展望了青梅酒的发展前景.     

松土促根剂对土壤质地、冬小麦产量和淀粉糊化特性的影响

为了解决近年来华北地区麦田因多年旋耕导致土壤耕层过浅、土壤质地变差、小麦根系发育不良以及小麦产量品质降低等问题,在平衡配方施肥的基础上,通过田间试验研究了Agri-star松土促根剂对土壤质地及小麦产量和淀粉糊化特性的影响。结果表明,施用松土促根剂和土壤深耕处理均可起到降低土壤容重,增加单位体积小麦根系质量,改善土壤理化性状的作用。此外,施用松土促根剂能够提高冬小麦成穗数和穗粒数,进而起到提高小麦籽粒产量的效果,其中以1号松土促根剂+配方肥处理籽粒产量最高,平均达7 925 kg/hm2,较单施配方肥处理增产12.9%。研究还发现,施用配方肥、添加松土促根剂或者进行土壤深耕处理能够改善小麦籽粒淀粉品质,同样也以1号松土促根剂+配方肥处理效果最好。综合比较分析,在当前华北地区免耕、旋耕麦田,应用Agri-star松土促根剂可以改善土壤质地,提高小麦产量和改善小麦籽粒淀粉品质,具有广阔的应用前景。     

Experimental Study on, Small Span to Depth Ratio Coupling Beams withNew Reinforcement mewt Scheme and Design Method

Coupling beams combining two coupled walls are the primarily energy dissipating elements in the coupled walls and play a key role in improving ductility. It is proved by the test outcome at home and abroad that the shear failure happening early cannot be