不同基因型大麦苗期对干旱胁迫的响应及HvPIPs基因表达特征分析

为研究不同基因型大麦苗期对干旱胁迫的响应,挖掘优质抗旱的大麦种质资源,以4份不同基因型大麦(2个高抗品种ZDM5430和ZDM5458,2个干旱敏感型品种7DCADA和IL-12)为材料,利用聚乙二醇(PEG-6000)模拟干旱条件,综合分析不同品种大麦的苗期抗旱性差异;并通过对不同品种根系进行PIPs实时定量分析,研究水通道蛋白AQPs基因与干旱胁迫之间的应答关系。结果表明,持续干旱胁迫会使大麦生长变缓,各处理苗长、根长、叶含水量和根含水量都呈下降趋势,其中,4个品种的大麦叶含水量在干旱胁迫14 d时下降最为显著,与对照相比,其降幅分别为29.14%、52.64%、21.67%和72.15%。干旱胁迫对大麦苗期干物质积累量和根冠比的影响较小,各处理间差异不显著;但持续干旱后,抗旱品种ZDM5430的根冠比呈上升趋势,在胁迫7、14、21 d时较CK分别增加了4.92%、42.86%和21.05%。随着胁迫时间的延长,大麦旗叶叶绿素含量和根系活力也呈下降趋势,其中ZDM5430和ZDM5458较对照组降幅较小,说明抗旱品种的形态指标、叶绿素含量及根系活力受干旱胁迫的影响较小。通过PIP...     

退化高寒草甸斑块根—土复合体特征研究

高寒草甸斑块的根-土复合体对局部水土流失过程具有调控作用,为研究其特征及抗侵蚀效应,本研究选取三江源区达日县境内典型中度退化草甸的植被斑块为研究对象,调查草甸斑块中心与边缘植物群落特征,测定斑块边缘0～10 cm土层和斑块中心0～20 cm土层的容重、含水率、毛管孔隙度等土壤物理性质,并开展单根拉伸和根-土复合体直剪试验。结果表明：受优势种矮嵩草的分布影响,地上生物量主要分布在斑块中心,根系主要分布在0～10 cm土层;斑块中心区域土壤抗剪强度、内摩擦角和粘聚力均随土层深度的增加而减小;斑块边缘区域土壤粘聚力,抗剪强度明显高于斑块中心区域,草甸斑块植物根系是土壤抗剪强度的主要影响因素。草甸斑块根-土复合体能明显增加退化草甸土壤的抗侵蚀能力,研究结果可为深入研究高寒草甸根系固土功能及水土流失调控提供科学依据。     

短花针茅荒漠草原物种间关系的多度不对称性对载畜率的响应

目前物种的相对多度与种间关系的内部联系如何影响物种共存仍不清楚。为探讨植物群落物种间关系强度的多度不对称性及其对载畜率的响应,本研究以内蒙古短花针茅(Stipa breviflora)荒漠草原植物群落为对象,分析了对照、轻度、中度及重度放牧下群落物种的多度及其频率。结果表明：随载畜率的增大,物种数呈现出降低的趋势。不同载畜率下同分布指数CO均存在明显的多度依赖性;常见种(如短花针茅、无芒隐子草(Cleistogenes songorica)及刺穗藜(Chenopodum aristatum))对其他物种的作用强度普遍较强。不同载畜率下短花针茅对无芒隐子草及刺穗藜的作用强度均高于其二者对短花针茅的强度,表现出种间强度的不对称性。此外,放牧使得短花针茅对无芒隐子草的作用强度呈现出增大的趋势,使得无芒隐子草对短花针茅的作用强度呈现出降低的趋势。因此,物种间存在多度的不对称性,而放牧进一步造成其物种间作用强度的变化。     

尕海湿地区沼泽草甸退化对土壤氮转化酶活性的影响

为探讨高寒湿地退化对土壤氮转化酶活性的影响,以青藏高原东缘尕海湿地未退化（ND）、轻度退化（LD）、中度退化（MD）和重度退化（HD）4种不同退化程度0~40 cm土层沼泽草甸为研究对象,研究不同退化与土层中土壤氮转化酶（蛋白酶、脲酶、硝酸还原酶和亚硝酸还原酶）活性的变化特征及其与土壤理化性质之间的关系。结果表明：1）随沼泽草甸退化程度加剧,土壤含水量、全氮、铵态氮和微生物生物量氮含量均显著降低,土壤温度与硝态氮含量却显著增加。2）随退化程度加剧,各土层土壤脲酶活性增加、蛋白酶活性降低,且仅在20~40 cm土层存在显著差异;硝酸还原酶活性增加、亚硝酸还原酶活性降低,在0~20 cm土层存在显著差异。3）各退化程度中,土壤脲酶、蛋白酶、亚硝酸还原酶活性均随土层深度的增加而显著下降,硝酸还原酶活性仅在HD显著下降。4）退化程度和土层对4种土壤氮转化酶活性均存在显著影响,且对土壤硝酸酶和亚硝酸还原酶活性存在显著交互作用。5）冗余分析表明土壤含水量对土壤氮转化酶活性变化的贡献率高达67.1%,其是驱动尕海沼泽草甸退化演替过程中土壤氮转化酶活性变化的主导因素。研究结果可为高寒湿地生态系统退化中的土壤酶活性变化规律提供理论依据。     

Knowledge-based Intelligent Decision-making System for the Safety of Rockets

With the progress of science and technology, the astronautics has obtained great development and researched in many countries, the problem on rocket safety control is important during the rocket launching proceeding, and is also the focus of every space country. At first, the importance of rocket safety control is introduced and the characteristics of the existing system for the safety of rockets are analyzed. After indicating its disadvantages, the design idea, system framework and method for realization of the knowledge-based intelligent decision-making system are proposed to improve certainty and authenticity of safety decision, containing correspond knowledge and adopting the technology of intelligent decision and reasoning on AI.     

Research on the Realization of Remote Controlling for Multi-output Power Supply of Communication Equipment Based on Ethernet

According to the requirements of communication power supply, such as high reliability, wide application and high availability, the authors raise a new remote control design for a multi-output power supply for communication equipment based on TCPIP protocol and embedded technology. Then the hardware design is given for the system is discussed based on Ethernet professional chip PRTL8019AS and related circuits. The firmware software design for the salve-computer based TCPIP technology, and the soft design of communieation and control for the master-computer are proposed based on Winsoek and MFC technology in detail A test machine is built to do the testing, the test results prove that the test machine works stably and well, satisfies the design rules and also provides a feasible method for the remote supervise in communication power supplier whose requirement includes remote supervise, no-people on duty and so on.     

Application and Advancement of Reinforced Earth Technique

In this paper, the application of reinforced earth technique, principle and calculation method, new reinforced materials developed and produced are introduced. A few of key technical problems in reinforced earth application is discussed, such as reinforced earth behavior, calculation method, durability of reinforced material, amendment and complement of the current standards. Then, the reinforced earth technique development and advancement were introduced.     

Friction and Wear Characteristics of Plastic Alloy Bearings under Different Lubricating Condition

Ultra High Molecular Weight Polyethylene (UHMW-PE) is a kind of high anti-wear engineering plastic with many excellent physical and mechanical performances. It has been widely applied in the field of mechanism such as bearing and pump. Effect of load, speed, time on friction and wear properties of Ultra High Molecular Weight Polyethylene(UHMW-PE)plastic alloy bearings under different Lubricating Condition are studied by using MPV-200 model friction and wear testing machine. The test results show that water lubrication reduces the friction coefficient of bearings but increases the wear rate as compared with dry friction. At the same time, wear mechanisms are analyzed systemically. It provides a theoretic basic for practical application of plastic alloy bearings     

铁矿粉烧结液相流动性能的特征数方程的建立

为解决在研究铁矿粉烧结液相流动性能时通常只考虑面积增长率这一终点信息,而没有考虑过程信息的缺陷以及采用多个指标来表征流动性能在使用上的不便,对影响流动性的因素进行了分析,结合量纲分析和白金汉定理推导出了能定量表征流动性强弱的流动性特征数(LD),简化特征数方程后得到等效流动性特征数(Ld Θ)。试验采用了可视卧式高温炉,记录了铁矿粉烧结液相流动的整个过程信息,通过基础实验和对照实验确定液相流动的起点和终点之后,可以得到每一种矿粉相应的等效流动性特征数数值。测量5种铁矿粉在两种方法下的流动性指标,当只考虑面积增长率时的流动性强弱顺序为A>C≈D>B>E,新方法下为Ld ΘA>Ld ΘD>Ld ΘC≈Ld ΘE>Ld ΘB,两种方法下的指标相近,但是综合了各种重要信息的新指标能进一步区分出各个因素对流动性能的影响程度。     

The analysis of China wind power industry

The development course of China wind power industry is reviewed by six stages. National policies on wind power industry are elaborated from the aspects of laws & regulations, planning, finance & taxation and electrovalence policy. And these policies have played an important supporting and regulating role in the development of wind power industry. The development status of China wind power industry is analyzed based on wind turbine installed capacity, wind power output and their growth rate. It is explained that national wind turbine manufacturers have kept developing and become strong by the data of new global installed capacity share of mainland wind turbine manufacturers in 2013 and the new global market share of 8 domestic enterprises among the world top 15 wind turbine manufacturers. But there are still 5 key problems which influence the development of national wind turbine need to be solved, including lack of top-level design, abandon and restriction wind power seriously, lack of R&D abilities, some of the key parts relying on imports and wind turbine facing a quality guarantee dilemma. Taking Sinovel Wind Group Co. Ltd. and Xinjiang Goldwind Sci & Tech Co. Ltd., the two leading companies as an example, their performance is analyzed and it’s pointed out that the wind industry must keep vigilant after the overspeed development. The enterprises should try to avoid neglecting cultivating their inner core competitive ability, including technology advancements and products reliability. Occupying the market with low price competition and expanding blindly is also not desirable. At last, the development prospects of our country’s wind power industry are analyzed and three proposals are put forward.