可视化编程技术在发动机外特性曲线绘制中的应用

通过对汽车发动机外特性的理论分析,在处理汽车发动机外特性曲线时,建立了一种适合处理发动机外特性曲线的三次样条函数拟合的数学模型,在C Builder可视化开发平台上,编制了汽车发动机外特性曲线绘制程序.利用三次样条函数插值法对实验数据进行拟合,实现了发动机外特性曲线绘制的自动化.     

临界风速气力输送模糊控制仿真

基于MATLAB／Simulink软件环境，建立了临界风速气力输送模糊控制模型，并进行了仿真研究。仿真结果表明，模糊控制器能很好地达到预期控制效果，并具有快速、准确的优点，从而解决了气力输送过程中按动耗最低原则自动调节和控制风速的问题，为气力输送系统的性能改进提供了一条途径。     

Modeling soil water dynamics in a drip-irrigated intercropping field under plastic mulch

Intercropping, drip irrigation, and the use of plastic mulch are important management practices, which can, when utilized simultaneously, increase crop production and save irrigation water. Investigating soil water dynamics in the root zone of the intercropping field under such conditions is essential in order to understand the combined effects of these practices and to promote their wider use. However, not much work has been done to investigate soil water dynamics in the root zone of drip-irrigated, strip intercropping fields under plastic mulch. Three field experiments with different irrigation treatments (high T1, moderate T2, and low T3) were conducted to evaluate soil water contents (SWC) at different locations, for different irrigation treatments, and with respect to dripper lines and plants (corn and tomatoes). Experimental data were then used to calibrate the HYDRUS (2D/3D) model. Comparison between experimental data and model simulations showed that HYDRUS (2D/3D) described different irrigation events and SWC in the root zone well, with average relative errors of 10.8, 9.5, and 11.6 % for irrigation treatments T1, T2, and T3, respectively, and with corresponding root mean square errors of 0.043, 0.035, and 0.040 cm³ cm^?3, respectively. The results showed that the SWC in the shallow root zone (0–40 cm) was lower under non-mulched locations than under mulched locations, irrespective of the irrigation treatment, while no significant differences in the SWC were observed in the deeper root zone (40–100 cm). The SWC in the shallow root zone was significantly higher for the high irrigation treatment (T1) than for the low irrigation treatment, while, again, no differences were observed in the deeper root zone. Simulations of two-dimensional SWC distributions revealed that the low irrigation treatment (T3) produced serious severe water stress (with SWCs near the wilting point) in the 30–40 cm part of the root zone, and that using separate drip emitter lines for each crop is well suited for producing the optimal soil water distribution pattern in the root zone of the intercropping field. The results of this study can be very useful in designing an optimal irrigation plan for intercropped fields.     

液压节能技术的应用与发展

节约能源已经成为当今社会的主流问题，对于液压技术领域中的液压节能技术的探讨也逐渐提到议事日程。为此，主要介绍了几种节能液压元件和典型的节能液压系统的应用状况，并对液压回路的节能发展趋势进行了阐述，为更好地利用能源提供了参考。     

低比转数离心泵叶轮出口紊流流动结构分析

在叶轮内三维紊流流动数值计算的基础上，从介质能量的观点，分析了不同工况下低比转数离心泵叶轮出口处的紊流流动结构。数值计算采用SIMPLEC算法，在贴体坐标系下求解Navier—Stokes方程，紊流模型采用标准的κ—ε模型。计算结果表明，在叶轮的出口附近靠近吸力面一侧存在一个低能区，而压力面一侧能量相对较高。这与有关文献中所指出的离心风机的“射流—尾流”结构相对应。当偏离设计工况时，该低能区的范围和强度略有增加，相对应的叶轮效率也降低。计算结果与水泵在这些工况下的效率实验结果相一致，说明低能区的存在是影响低比转数离心泵效率的重要因素。     

多效唑对不同高度粉蕉植株的矮化效应研究

以"金粉1号"粉蕉为试材,设置4个不同植株高度梯度处理,对其进行2次相等用量的多效唑树盘淋施,并对各处理植株新抽生叶片叶间距、株高、茎基围及产量性状指标进行测定与比较分析,以期筛选出多效唑矮化粉蕉的适宜施用时期。结果表明,多效唑处理对粉蕉产量性状无显著性影响,对粉蕉营养生长有显著抑制作用,植株叶间距明显缩短,株高降低,茎干比增加。其中T2(90 cm≤株高<120 cm)处理矮化效果最为理想,收获期株高359.4 cm,较对照显著降低20.9%,茎干比较对照显著增加5.7个百分点,果指长、果指周长、株产与对照相比稍有减小,差异不显著。     

苧麻新品种1504的植物学和生物学特性

“1504”是从江西芦竹青的自然变异后代中选育出来的新品种。该品种在全国联合区域试验中比湖南芦竹青增产11. 4%,在省区试中与湖北细叶绿产量相当。在全国区试及省区试中,“1504”平均单纤维支数分别为2267和2236支,且多年试验证明“1504”的纤维支数均在1800支以上,是一个不可多得的高支品种。同时,“1504”还具抗炭疽病,抗旱、抗风等特点。     

水牛脾切除术的研究

近3年来成功地作了20例水牛的脾切除术,没有1例因手术而招致死亡。成功地探索出适合于水牛脾切除术的麻醉方法、切口部位和大小、手术操作方法。     

仔猪黄痢K88-K99-987p-F41多价菌毛疫苗的制备及小鼠免疫试验

为了更好地预防仔猪黄痢,选取野生分离菌株HN2001（K88ab）、HN2002（K88ac）、HN2003（K88ad）、HN2004（K99）、HN2005（987p）和HN2006（F41）培养后用低温磁力搅拌法提取菌毛,制成5批多价菌毛混合油乳剂灭活苗。试验结果表明,5批多价灭活疫苗对小鼠的平均保护率达95．0％,为进一步进行本体动物试验提供了有价值的参考资料。     

新形势下纵深推进长汀水土流失治理的实践与探索

近年来,长汀县水土流失治理取得了关键性胜利,规模化成片治理基本结束.随着治理工作向纵深推进,显现出治理主体单一、流失斑块分散、治理资金不足、成效亮点不足以及治理成果巩固难等突出问题.为补齐治理短板,2019年以来,长汀县以项目化推进水土流失精准治理深层治理为抓手,强化工作举措,推动全县水土流失治理取得了决定性胜利,持续...