红枣茉莉花茶复合饮料的研制

以太谷壶瓶枣、茉莉花茶为主要原料,利用正交试验设计,主要研究了茶叶的类型、茶水比、复合汁配方对红枣茉莉花茶复合饮料品质的影响。结果表明,红枣茉莉花茶复合饮料最佳的生产工艺条件为:茉莉花茶与水的比例1:100,茶汤与红枣汁的混合比为1:1,蔗糖用量4%,柠檬酸用量0.05%,食盐用量0.10%。该饮料风味浓郁,口感柔和,具有保健、清凉止渴之功效。     

Design of wireless inductive power receiver circuit in artificial subretinal chip

A scheme of inductive wireless receiver circuit is put forward, according to special requirement of inductive wireless power supply in artificial subretinal prosthesis circuit. The proposed receiver circuit can be divided into CMOS rectifier, regulator and self-biasing circuit. The CMOS rectifier is used to provide power supply for regulator and self-biasing circuit. The self-biasing circuit furnishes the regulator with bias voltage and bias current which is independent from power supply. The proposed receiver circuit is designed by Cadence tool and Chartered 0.35 μm CMOS device model, and oscillator in artificial subretinal chip is used as the proposed receiver circuit’s load. The results show that the proposed receiver circuit can provide load capacity of 3.3 V and >1 mA,with a layout size of 62 μm×195 μm.     

甘蓝型油菜烷羟化酶基因MAH1的克隆与表达分析

在植物蜡质合成途径中,中链烷烃羟化酶(mid-chain alkane hydroxylase,MAH)催化烷烃羟基化形成二级醇,进一步氧化为酮。本研究以拟南芥P450依赖性酶CYP96A15/MAH1基因为探针,采用电子克隆与RT-PCR技术,获得2个甘蓝型油菜MAH1的全长编码区序列,分别命名为BnMAH1-1和BnMAH1-2(Gen Bank登录号分别为KT795344和KT795345)。二者ORF长度均为1491 bp,无内含子,核苷酸与氨基酸序列分别有92.4%与90.9%的一致性。根据编码区预测的BnMAH1-1和BnMAH1-2前体蛋白均为包含496个氨基酸残基的多肽链,具有典型的P450蛋白家族保守结构P415x R417x、K螺旋(E359xx R362)、C末端的血红素结合域(F436xx Gx Rx Cx G445)以及氧结合带保守区域(A/G)G309x(D/E)T312(T/S)。NCBI Blast N、氨基酸序列多重比对与系统学分析表明,两者与拟南芥MAH1/CYP96A15同源性最高。实时荧光定量PCR表明,BnMAH1-1与BnMAH1-2主要在甘蓝型油菜茎、叶、花、及角果中表达,其中在叶片中的表达量最高,在根系中的表达量很低,这与角质层蜡质主要沉积在植株地上部分相一致。BnMAH1-1和BnMAH1-2在无蜡粉材料茎、叶片中几乎不表达,表明蜡质的减少与MAH1的转录下调有关。BnMAH1-1与BnMAH1-2受SA、Me JA、ACC、ABA、Na Cl及干旱胁迫诱导表达,其中BnMAH1-1可能在水分胁迫响应中起主要作用。     

PEG胁迫对西伯利亚冰草种子萌发及幼苗生理特性的影响

以PEG-6000模拟干旱胁迫,分析西伯利亚冰草种子发芽率、发芽势、胚根和胚芽长及三叶期幼苗相对电导率、丙二醛和游离脯氨酸含量的动态变化规律.结果表明:1)高渗透势PEG溶液(-0.2,-0.4 MPa)能够促进种子萌发,在-0.4 MPa时,发芽率和发芽势均达到峰值.2)高渗透势PEG溶液(-0.2,-0.4,-0.6 MPa)对胚根伸长具有一定的促进作用,-0.4 MPa最大,但对胚芽表现出一定的抑制作用.3)随着渗透势的降低,发芽率、发芽势、胚根长和胚芽长不断下降,胚根/胚芽的比值持续上升.4)3叶期幼苗相对电导率、丙二醛和脯氨酸含量随胁迫强度的增加,胁迫时间的延长持续增加,相对电导率、丙二醛含量除了-0.4 MPa,1d处理外,其他处理均极显著(p＜0.01)高于对照,脯氨酸含量各处理均极显著(p＜0.01)高于对照,相对电导率、丙二醛和脯氨酸这3个指标均可作为抗旱性评价指标.     

脉冲电流烧结Al2O3颗粒的广义热弹性分析

脉冲电流烧结过程的颈部形成机理,特别是非导电粉末材料,是需要着重研究的核心问题。以非导电Al₂O₃粉末为研究对象,引入L-S（Lord and Shulman）型广义热弹性方程,初步探究烧结初期非导电粉末颈部局部高温形成以及快速烧结机理。利用Comsol Multiphysics模拟得到脉冲电流烧结过程中颗粒内部的温度场和应力场分布以及烧结颈部的化学势和空位浓度变化规律。数值结果表明,热以波的形式在烧结颈部产生叠加,形成局部高温。化学势变化表明：烧结初期表面扩散占主要作用,空位浓度差的突变使烧结颈部产生局部空位浓度梯度,促进烧结颈长过程,缩短烧结时间。     

KH_2PO_4渗调处理恢复和提高榉树种子活力的研究

采用不同浓度的KH_2PO_4处理常温贮藏12个月和18个月的榉树种子,结果表明:KH_2PO_4处理可提高榉树种子的发芽势、田间出苗率、活力指数及细胞膜系统的完整性,提高了种子的活力.在一定范围内,随着KH_2PO_4处理浓度的增加,榉树种子的活力也相应增加,KH_2PO_4处理浓度以3 g/L最佳,处理时间为24 h.     

光照、温度和盐胁迫对红花大金元种子萌发的影响

从光照、温度、NaCl胁迫等方面对红花大金元种子萌发特性进行了探讨.结果表明:光照对红花大金元种子萌发有显著促进作用;种子萌发的适宜温度为25～30℃,以25℃的发芽势、发芽率、发芽指数和活力指数最高且萌发后的幼苗生长良好;NaCl胁迫对红花大金元种子萌发和幼苗生长均有抑制作用:随NaCl浓度升高,种子发芽势、发芽率、发芽指数、活力指数和幼苗生长量均下降,发芽的高峰期推迟且峰值变小,相对盐害率升高;浓度大于0.20 mol/L时对种子萌发和幼苗生长的抑制作用明显,浓度达到0.50mol/L时种子不再发芽,但低浓度(0.01 mol/L和0.05mol/L)下种子发芽势、发芽率与对照差异不显著.     

利用RAPD和SSR分析36个贵州主要玉米种质的比较研究

利用RAPD和SSR两种标记方法研究了36个玉米自交系的遗传多样性,并对这两种分子标记系统进行了比较.利用筛选出的22条RAPD引物,检测到了148条有多态性的带;利用筛选出的34对SSR引物,检测到158个等位基因.RAPD和SSR分子标记均有很高的多态性,RAPD多态性带比例为95.95%,SSR位点检测出的平均等位基因数位4.65.RAPD分子标记结果将36个玉米自交系划分为6大类,SSR分子标记将其划分为5大类.与系谱分析基本一致,两种分子标记划分的结果也相似.研究认为,RAPD、SSR两种分子标记系统均适合于玉米种质的遗传多样性研究,但SSR更可取.     

The power-supply of X-ray machine adopting PID control and high-frequency inverter technology

To solve the problem of low control accuracy and low stability of current X-ray machines, a kind of digital power supply for X-ray machine is introduced. In the digital power supply, some key technologies are used to improve the output stability of the high frequency inverter, including improved BUCK circuit for voltage regulating circuit, high frequency inverter and soft switching technology for the high-voltage generator. The PWM control technology is used to control the switch transistor of voltage regulating circuit and inverter circuit, which makes the drive waveform output stable and easy to control. In order to improve the control accuracy, reduce the volume and change high voltage consecutively, the software PID of the microcomputer is used to control the feedback circuit. The high-accuracy power chip is used for the filament power supply to make the filament electric current stable. Through the analysis of the circuit, the parameters of the circuit are calculated and the circuit is simulated by PSPICE software. The results show that the theoretical analysis is consistent with the practical simulation results. The design can meet the requirement of the technology indices of the power supply of the X-ray machines.     

Application of time-frequency distribution correlating and matching method in signal extraction

The time-frequency coupling relation between useful non-stationary components and noises bring great difficulties to the realization of de-noising for non-stationary signals,which can not be solved by classic de-noising method in time or frequency domain. The principles of short time Fourier transform(STFT),Wigner-Ville transform,Chirplet adaptive decomposition are analyzed,and then a novel de-noising method for non-stationary based on joint time-frequency distribution is proposed. In this method,the analyzed signal WVD is seen as the combination of auto-WVD and cross-term WVD. Firstly,STFT energy spectrum of the analyzed signal is used as template to cross-correlate with its corresponding WVD in order to obtain the satisfactory time-frequency distribution with high time-frequency resolution and without cross-term interferences. Secondly,the useful components are decomposed as Chirplet function using the two-dimension least square fitting method,and then are extracted out to reconstruct for noise suppression. Finally,the computer simulation results verify the effectiveness of this proposed method. Its application in gearbox fault diagnosis indicates that with the method the extracted cycle of the gearbox vibration impulses has a good consistency with the corresponding fault frequency.