Effect of the lateral growth rate on wood properties in fast-growing hardwood species

We investigated the feasibility of using several fast-growing tropical or subtropical hardwood species for timber production by measuring key wood qualities in relationship to the high rates of lateral growth. The trees tested were sampled from even-aged plantations of Acacia mangium, A. auriculiformis, hybrid Acacia (A. mangium × A. auriculiformis), Eucalyptus grandis, E. globulus, and Paraserianthes falcataria (Solomon and Java origin) that had already reached commercial harvesting age. The released strain of the surface growth stress (RS), xylem density (XD), microfibril angle (MFA), and fiber length (FL) were measured at the outermost part of the xylem at breast height in each tree. Results were then compared to the lateral growth rate (radius/age) at breast height, which provides a relative indicator of the amount of tree growth per year. Our findings indicated that RS was constant, regardless of lateral growth rate in each species. Similar results were observed for XD, MFA, and FL, with a few exceptions, suggesting that high growth rates do not intrinsically affect the wood properties of fast-growing tropical or subtropical species that have reached harvesting age. However, special attention must be paid to patterns of xylem maturation when developing plantations of such species.     

Throughfall,stemflow and interception loss in a mixed white oak forest (Quercus serrata Thunb.)

Throughfall and stemflow measurements in a 60-year-old white oak stand (Quercus serrata Thunb.) were carried out during two periods totalling eleven months, from August to November 1993 and from May to November 1994, in order to clarify the rainfall partitioning of this forest. Troughs and spiral-type stemflow gauges connected to tipping bucket-gauges were used for throughfall and stemflow measurements. Seventy-five storms were analyzed individually. Coefficients of variation for throughfall and stemflow ranged between 5–25% and 20–70% respectively. Partitioning of net rainfall in throughfall and stemflow represent 72% and 10% of the gross rainfall respectively. Multiple regression analyses were carried out to determine the stemflow variability. In was determined that maximum rain intensity was highly correlated with stemflow and this variable explained a further 5.5% of the stemflow variation. Estimates of averaged lag time and drainage after rain cease for stemflow were 290 and 164 min, while estimates for throughfall were 60 and 104 min. respectively. The canopy saturation was estimated from continuous storms and showed a value of 0.6 mm. The trunk storage capacity was estimated at a value of 0.2 mm. The interception loss from the forest canopy was estimated in 18%. Interception loss was heighly correlated with rainfall characteristics such as duration and intensity.     

Difference in mass concentration of airborne dust during circular sawing of five wood-based materials

The object of this study was to compare the mass concentration of airborne dust during circular sawing of five wood-based materials: solid sugi (Cryptomeria japonica) lumber, tropical hardwood plywood, softwood plywood, particleboard, and medium-density fiberboard. Specimens were sawn at a constant feed per tooth (0.05 mm) using two saw speeds. The mass concentration of airborne dust of diameter 7.07 μm or less (respirable dust) was measured with a light-scattering dust monitor. The mass concentration showed a log-normal distribution, and the geometric means of mass concentration at saw speeds of 2000 and 3000 rpm were 2.33 and 2.89 mg/m³ for tropical hardwood plywood, 1.13 and 2.84 mg/m³ for particleboard, 0.91 and 2.28 mg/m³ for medium-density fiberboard, 1.09 and 1.38 mg/m³ for softwood plywood, and 0.32 and 0.66 mg/m³ for sugi lumber. The mass concentration for all five wood-based materials increased with the revolution speed of the circular saw.     

Effect of grain direction on transmittance of 100-GHz millimeter wave for hinoki (<Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis>)

The attenuation coefficients of 100-GHz millimeter waves polarized linearly were measured for cross-cut, quarter-sawn, and flat-sawn boards of hinoki (Chamaecyparis obtusa) that were 0.2–2.0 cm thick. This was done to examine the applicability of free-wave propagation theory for applying electromagnetic waves to wood. It was found that the transmittance of a millimeter wave through the specimen boards was lower when the fiber direction of a board was parallel to the direction of the electric field of the incident wave than when the fiber direction was perpendicular to the electric field, and there was little difference in the transmittance between the tangential and radial directions for the former case. These findings can be quantitatively explained by using propagation theory and the dielectric properties of wood.     

Relationship between roughness parameters based on material ratio curve and tactile roughness for sanded surfaces of two hardwoods

The roughness parameters on the material ratio curves were related to tactile roughness for samples of buna and mizunara. The surfaces of the samples were sanded using various grades of coated abrasives and the roughness parameters, reduced peak height (Rpk), core roughness depth (Rk), and reduced valley depth (Rvk), were estimated on the material ratio curves, which were obtained from roughness profiles determined using robust Gaussian regression filter. The values of Rpk and Rk were almost the same for buna and mizunara under the same sanding conditions and increased exponentially with tactile roughness. The coefficients of determination of those parameters and tactile roughness were higher than 0.79 at all cutoff wavelengths. On the other hand, the value of Rvk for mizunara was significantly larger than that for buna because of the deep local valleys. There was no relationship between Rvk and tactile roughness for both species.     

Substrate specificity of the nateglinide/H(+) cotransport system for phenolic acids

In clinical, patients usually take many kinds of drugs at the same time. Thus, drug-drug interactions involving transporters can often directly affect the therapeutic safety and efficacy of many important drugs. However, there have been few studies on food-drug interactions involving transporters. Dietary polyphenols have been widely assumed to be beneficial for human health. Polyphenols are found ubiquitously, and they are commercially prepared and used as functional foods. We have reported that ferulic acid, which is one of the most well-known polyphenols and is used as a functional food, affected the transport of nateglinide, an antidiabetic drug, by Caco-2 cells. In this study, we investigated the effects of other polyphenols on the nateglinide/H(+) transport system. We report here that caffeic acid and p-coumaric acid have a different inhibitory manner on the uptake of nateglinide. The results of this study are useful to identify the substrate specificity of the nateglinide/H(+) cotransporter.     

Production efficiency and telomere length of the cloned pigs following serial somatic cell nuclear transfer

The aim of the present study was to examine the production efficiency of cloned pigs by serial somatic cell nuclear transfer (SCNT) and to ascertain any changes in the telomere lengths of multiple generations of pigs. Using fetal fibroblasts as the starting nuclear donor cells, porcine salivary gland progenitor cells were collected from the resultant first-generation cloned pigs to successively produce second- and third-generation clones, with no significant differences in production efficiency, which ranged from 1.4% (2/140) to 3.3% (13/391) among the 3 generations. The average telomere lengths (terminal restriction fragment values) for the first, second and third generation clones were 16.3, 18.1 and 20.5 kb, respectively, and were comparable to those in age-matched controls. These findings suggest that third-generation cloned pigs can be produced by serial somatic cell cloning without compromising production efficiency and that the telomere lengths of cloned pigs from the first to third generations are normal.     

Genetic diversity of the entomopathogen<Emphasis Type="Italic">Verticillium lecanii</Emphasis> on the basis of vegetative compatibility

Forty-three isolates ofVerticillium lecanii from insects, phytopathogenic fungi and other substrates were tested for vegetative compatibility by observing heterokaryon formation among complementary nitrate-nonutilizing (nit) mutants.nit mutants were isolated from 42/43 strains examined. Twenty-one isolates were self-incompatible, and the remaining 21 isolates were divided into 14 vegetative compatibility groups (VCGs): ten containing only a single strain each, and the remaining four containing two to four isolates each. Members of isolates in each of these VCGs all shared the same IGS haplotype. Further, the isolates within a VCG were correlated with one another in part by fragment patterns of mt-LrDNA, -SrDNA, Bt-2 and H4 region, by PCR-RFLP and -SSCP, but not by dsRNA. Two isolates belonging to VL-J2 have high virulence to aphids, whereas strains from VL-J1 lack this character. These findings indicate that two VCGs (VL-J1 and -J2) may originate from two distinct clonal lineages. Alternatively, high VCG diversity and HSI frequency ofV. lecanii might be associated with an array of distinct lineages. These data not only suggest relationships among DNA polymorphisms, virulence, and VCG, but also demonstrate genetic heterogeneity ofV. lecanii. http://www.phytoparasitica.org posting Sept. 30, 2003.     

Spherical crystallization: direct spherical agglomeration of salicylic Acid crystals during crystallization

Direct spherical agglomeration of salicylic acid crystals during crystallization is described. The needle-like salicylic acid crystals simultaneously form and agglomerate in a mixture of three partially miscible liquids, such as water, ethanol, and chloroform, with agitation. The agglomerates can be made directly into tablets because of their excellent flowability. Spherical crystallization could eliminate the usual separate agglomeration step after crystallization and may be adaptable to other pharmaceutical and chemical systems.