Synthetic Application for Analysis Methods of the Planar Mechanism Overconstraints

Overconstraints exist widely in planar closed chain mechanisms and mechanical systems result in a series of detrimental influences on behavior of machines, and attention is given to them by machine designer. Some analysis methods of overconstraints in planar closed chain mechanisms are presented, and more study due to the faultiness of these methods. In accordance with faultiness of two common kind of methods, formulas method and loop analysis method of degrees of freedom, and by combining these two methods, an useful mechanism overconstraints analysis method which is convenient for computer aided overconstraints analysis is gained via research on the two methods thoroughly and systematically, and some new views about mechanism overconstraints analysis are presented.     

A FINITE ELEMENT ALGORITHM FOR PARALLEL PROCESSING OF MULTI-FRONTS

In this paper,a new algorithm for solving large-scale finite element system is presented, which utilizes the architecture of parallel processing. Firstly, the structure is partitioned into sub-regions. Then multi-fronts are used to assemble and eliminate concurrently in every sub-region. Thus the condensed interface stiffness matrices and load vectors are obtained. By serially assembling and solving global equation to get interface displacements and backing to every sub-region, the inter-nodal displacements and element stresses can be solved. The results of computation show that it can not only increase the speed of computation,but also save the memory space of computer effectively. This algorithm is an effective method for solving large-scale structural finite element systems.     

Nonlinear Finite Element Analysis of RC Deep Flexural Simply Supported Beams Using Disturbed Stress Field Model

A nonlinear finite element analysis of 4 RC deep flexural simply supported beams with the program VT2 is presented. Crack development and failure modes , longitudinal reinforcement strain distributions and load -deflection curves were compared as a result in order to evaluate the validity of the disturbed stress field model to analyse such deep simply supported beam.     

急、慢性冷应激对雏鸡腓肠肌及血清抗氧化功能的影响

【目的】探讨自由基在冷应激对禽类机体损伤中所起的作用,为探索促进动物冷适应的方法,提高动物的抗寒能力提供一定的理论依据;【方法】应用化学比色法检测了急、慢性冷应激对腓肠肌和血清中总抗氧化能力(T-AOC)、过氧化氢酶(CAT)活性、谷胱甘肽过氧化物酶(GSH-Px)活性、超氧化物歧化酶(SOD)活性及丙二醛(MDA)含量的影响;【结果】急性应激时,随应激时间的延长,腓肠肌T-AOC与SOD活性均逐渐降低,GSH-Px活性、CAT活性及MDA含量均逐渐升高,血清T-AOC逐渐降低,GSH-Px活性、CAT活性、SOD活性及MDA含量均逐渐升高;慢性应激时,随应激时间的延长,腓肠肌T-AOC、GSH-Px活性、CAT活性及SOD活性均逐渐升高,MDA含量逐渐降低,血清T-AOC、GSH-Px活性、CAT活性及MDA含量均逐渐升高,SOD活性逐渐降低;【结论】表明急、慢性冷应激均可使机体的抗氧化功能发生改变,诱发氧化胁迫,导致机体内自由基增多,对机体造成损伤。     

联合收获机前进速度模糊控制系统多目标遗传优化

针对联合收获机前进速度模糊控制系统参数设计具有主观性,导致作业性能不理想的问题,以切纵流联合收获机样机为研究对象,构建联合收获机前进速度模糊控制系统仿真模型,并建立控制性能和收获性能的优化目标函数来衡量联合收获机的作业性能,利用多目标遗传算法对模糊控制系统的隶属函数和输送槽、割台螺旋输送器和切流滚筒对前进速度的影响因子进行优化。通过对优化前后模型仿真对比和两组田间试验数据分析,表明优化后的控制系统在受外界干扰情况下控制性能得到了较好的保持,收获性能在喂入量变化不大情况下,单位平均损失率分别由1.45%和1.26%降至1.12%和1.14%,联合收获机的总体作业性能得到改善。     

阜新县节水农业分区研究

针对阜新县水资源紧缺的现状，在综合分析全县气候、土壤、水资源现状、农业种植制度和经济发展水平等因素的基础上，对阜新县节水型农业分区进行了研究，为确保分区指标的科学性、系统性，采用模糊数学聚类分析方法，探讨节水农业的地域分布规律，进行节水农业分区，以阜新县为例对因地制宜地发展东北半干旱地区的节水农业分区进行有益的探索。     

国外水泵研究现状概述

以丰富的材料为基础，概括性地评价了西方近年中在水泵技术各研究领域，如流场计算、汽蚀机理、振动、无泄漏密封等方面的研究现状及成果，这些资料将为国内水泵技术人员的产品开发、科研活动提供有益的启发和借鉴。     

基于SLMD的生物质热解动力学预测模型

采用单纯形格子混合设计法(SLMD)对纤维素、半纤维素和木质素3种生物质组分进行复配优化设计,并在综合热分析仪上进行了热解试验。分析了3组分混合热解特性,建立了由生物质3组分比例直接计算动力学参数的预测模型,对模型进行了试验验证。结果表明:纤维素热解反应级数较低(1.20),活化能较高(134.50 k J/mol),指前因子较大(3.49×1012s-1),热解较为迅速与剧烈;半纤维素和木质素热解的反应级数较高(1.30、1.32),活化能较低(33.51、19.98 k J/mol),指前因子较小(9.43×103、107 s-1),热解较为缓慢;3组分在混合热解中对动力学参数存在交互影响,纤维素对活化能和指前因子的影响较为显著,而半纤维素与木质素对反应级数的影响较大;动力学参数预测模型精度较高,可有效预测生物质热解动力学参数。     

马铃薯收获机设计试验研究

张家口地区马铃薯种植面积广,畜力犁收获时效率低,漏收和破损较为严重,外购的马铃薯收获机不适合当地农民的种植方式.为此,设计了马铃薯收获机.该机可实现马铃薯挖掘、薯土分离和薯秧分离.同时,对该机部分关键零件进行了设计,对样机在玉米茬地和马铃薯地的工作性能进行了试验研究.试验结果满足当地农民的使用要求,试验数据对设计多行马铃薯收获机具有参考和借鉴作用.