Radial variation of vessel size and distribution in cork oak wood (<Emphasis Type="Italic">Quercus suber</Emphasis> L.)

Quercus suber L. is an important species producing cork whose wood characteristics have not been investigated a lot. Cork oak wood vessels are a striking feature and the most abundant wood tissue largely influencing density and permeability. Vessel size and distribution were studied in approximately 40 year-old and never debarked cork oaks by continuously measuring along the radial direction in the transverse section of wood discs taken at 1.3 m of height using image analysis techniques. The vessel size increases with age from 7660 ± 2286 to 21136 ± 6119 μm², the conductive area from 5.4 ± 2.2 to 11.6 ± 3.9%, and the vessel density remains approximately constant between 5.2 ± 1.5 and 7.3 ± 3.5 vessels/mm². In comparison with ring-porous and some evergreen oaks, cork oaks show a similar conductive area but smaller vessels. Vessel architecture is known to play an important role on oaks tolerance to hydric stress, and these cork oak trees were growing under very harsh edaphoclimatic conditions, not tolerated by other oaks. The well-developed and deep root system allowing access to constant water supply may contribute to the cork oak’s relatively high conductive area.     

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).     

Crystalline structure of heat-treated Scots pine [<Emphasis Type="Italic">Pinus sylvestris</Emphasis> L.] and Uludağ fir [<Emphasis Type="Italic">Abies nordmanniana</Emphasis> (Stev.) subsp. <Emphasis Type="Italic">bornmuelleriana</Emphasis> (Mattf.)] wood

The aim of this study was to determine changes in crystallinity and crystalline unit cell type of heat-treated Scots pine (Pinus sylvestris L.) and Uludağ fir (Abies nordmanniana stev. subsp. bornmuelleriana Mattf.) wood samples by means of FT-IR spectroscopic method. Heat treatment was applied on the test samples in an oven at three different temperatures (120, 150, and 180°C) and for two different periods of time (6 and 10 h) under atmospheric pressure. It was designated that crystallinity of both Scots pine and Uludağ fir wood samples increased during heat treatment depending on the duration. However, monoclinic structure in crystalline unit cells of Scots pine and Uludağ fir wood samples converted to triclinic structure when heat treated. It was estimated that monoclinic structure was dominant in the crystalline unit cell. It was established that the crystalline structure of Scots pine wood samples was more affected by heat treatment than that of Uludağ fir wood samples.     

Plant diversity of secondary forests in response to anthropogenic disturbance levels in montane regions of northeastern China

The effects of anthropogenic disturbances on forest structure and plant diversity of secondary forest ecosystems were evaluated based on the classification by site factors in the montane regions of northeastern China. Forty-five sample plots containing 720 sub-plots of overstory species (8 m × 8 m), 1,440 quadrats of understory species (2 m × 2 m), and 1,440 quadrats of herbaceous layer species (1 m × 1 m) were clustered into five groups (G1, G2, G3, G4 and G5) by site variables with Hierarchical Cluster Analysis. Meanwhile, the disturbance levels corresponding to the five groups were determined according to the factors influencing human disturbances (D0-G2, D1-G1, D2-G3, D3-G5, and D4-G4). Species diversities of overstory, understory, herbaceous layer and overall species were evaluated using species number, Margalef index, Pielou index, Shannon–Wiener index, and Simpson index; and β-diversities (Whittaker index, Cody index). Basal area of stands exhibited a decreasing trend along the disturbance level due to a gradual increase in the extraction of timber by the human disturbances. The indices of species diversity suggested that overstory and understory species were distributed evenly among the groups or disturbance levels. There were no absolutely dominant tree species in the secondary forest ecosystems. The differences in site factors and the current disturbance intensities were not intense enough to lead to loose changes in overstory and understory species. The species diversity indices exhibited the maximum values at D3 (G5) for herbaceous layer species; this may suggest that the current disturbance intensities were intense enough to lead the changes of herbaceous layer species. Three rare and endangered species (Juglans mandshurica, Fraxinus mandshurica and Acanthopanax senticosus) were found within the secondary forests. These rare and endangered species appeared in each clustered group or disturbance level, which suggested that the current disturbance intensity in the study area was not strong enough to influence the distribution of rare and endangered species. The current disturbances in the secondary forests may not lead to a decrease in stability and complexity of the overstory and understory species, but the higher disturbance level may be intense enough to change the habitat fitness for the herbaceous species. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized authors.     

Dynamics of Zn between soil and plant in Northeast Leymus chinensis grassland

A study was conducted to determine the dynamic of Zn content between soil and plant in the natural protection zone of Leymus chinensis grassland in Changling County (44°30′–44°45′N; 123°31′–124°10′E), Jilin Province, China. Results showed that the total Zn content was lower, available Zn content had a moderate level in the soil, and the plants was not lack of Zn. During the growing season, content of total Zn and available Zn in soil showed a down-trend distribution along the soil profile. Content of total Zn had a significantly positive correlation with that of the organic matter, but it was negatively correlated to soil pH. Monthly dynamic of the average content of total Zn showed a “V” type curve in the growing season from May to August, and July was the nadir. The trend of the average content of available Zn was similar to the content of total Zn, but was down after August; Zn content variation in the organs and litter of L. chinensis was great, with the order of root>rhizome >leaf>stem>litter. The ratio of available Zn content in A layer versus B layer was more than 2 times that of the total Zn, which indicated that the soil of A layer had higher enrichment capacity of available Zn. The enrichment of Zn in the root of L. chinensis was 44.17 times as that in the soil. The absorbing intensity of root had a significantly negative correlation with the activity of Zn in the soil (r=−0.8800, p<0.01). Biography: ZHOU Xiao-mei (1966–), female, Ph.D., associate professor of Jilin Normal University, Siping 136000, P.R. China.     

Winter photoinhibition in the field involves different processes in four co-occurring Mediterranean tree species

Photoinhibition was examined in four co-occurring Mediterranean evergreen tree species during two consecutive winters. In response to low temperatures and saturating light, Juniperus phoenicea L., Pinus halepensis Mill., Quercus coccifera L. and Q. ilex ssp. ballota (Desf.) Samp. exhibited marked chronic photoinhibition, indicated by low predawn maximal photochemical efficiency of photosystem II (PSII) (Fv/Fm). Low Fv/Fm values were correlated with high concentrations of xanthophyll cycle components (VAZ) and with the maintenance of high concentrations of zeaxanthin overnight (DPSpd). In all species, however, chronic photoinhibition was enhanced as the winter progressed in the absence of changes in DPSpd, suggesting cumulative damage toward the end of winter. Photoinhibition differed among species: P. halepensis always displayed significantly higher Fv/Fm values; and Q. coccifera had the lowest Fv/Fm values, showing a high sensitivity to the combination of high light and low temperatures. Differences among species were not fully explained by differences in the xanthophyll pool or its de-epoxidation state. Chronic photoinhibition overlapped with a dynamic photoinhibition as shown by the low values of photochemical efficiency of the open reaction centers of PSII at midday. Winter photoprotective strategies differed among species and may involve photoprotective mechanisms in addition to those associated with xanthophylls. The observed species-specific differences matched results obtained for the same species in summer; however, comparison of the two seasons suggests that the higher VAZ concentration observed in winter has an additional structural photoprotective role.     

Effect of temperature and compression on the mechanical behavior of steam-treated wood

The mechanical behavior of steamed spruce wood changes dramatically with compression along the grain, the change being much more moderate perpendicular to the grain. The stiffness decrement due to increased temperature is greatest in the tangential material direction. The stiffness decrement due to compression is greatest along the grain. Compression to 80% compressive strain at 131°C inverts the order of the material directions regarding stiffness, the stiffness being the least along the grain. Plastic strain due to compression is greater at higher temperatures. The compression-induced decrement of stiffness along the grain is greater at higher temperatures, but the off-axis decrement of stiffness is less at higher temperatures.     

Mapping landscapes: Integrating GIS and social science methods to model human-nature relationships in Southern Cameroon

Participatory mapping and GIS are both necessary to model the interactions between humans and their environment. A case study from the forest margin in the Congo Basin demonstrates how data from participatory community mapping and other social science methods can be prepared for quantitative modelling. This approach bridged the gap between spatial modelling data and social decision-making in space by elaborating a geographically consistent social representation of the landscape and giving a geographical base to the connection between land use, its cultural representation, and its social management. This was achieved through an iterative process of GIS cartography, using feedback from village informants and field checking, to transpose the spatial references from participatory mapping sketches into reliable geographic locations. As well as demonstrating the utility of such data for modelling, this work clarified the distribution of land rights among the six main owner-clans spread through the eight hamlets in the watershed. The ‘basin’ of spatial resources and its relation to the rules of land use and natural resource management were defined for each clan. Land-use systems at the forest-agriculture interface in the study area proved to be complex, strongly driven by social rules and influenced by history and settlement strategies. These social and historical aspects established the framework within which communities make current decisions and interventions. The authors thank the people of Akok for their collaboration and hospitality. Village technician Michel Engueng and village contact Adolphe Ze facilitated and assisted this work. Our thanks also to Julie Mbazo’o and Remy Assoumou, both members of the ‘social side’ working group of the FLORES modelling team. Christopher Legg’s contribution to the discussion of this work through his constant reviewing of the CamFlores model is gratefully recognized. Finally, thanks to the whole CIFOR-ACM team for numerous scientific and methodological inputs. The Italian Foreign Ministry funded the work of Valentina Robiglio (APO-GIS specialist) through an APO contract with IITA. The European Union (Tropical Forestry budget line DG VIII) contributed to the CIFOR’s research program on the ‘Adaptive Collaborative Management of Forests’ (ACM) in Africa, and to the Alternative to Slash and Burn (ASB) program in Cameroon on ‘Environmental Services and Rural Livelihoods’ through the World Agroforestry Centre.     

Tree planting for poverty reduction in less-favoured areas of the Ethiopian highlands

This paper assesses the potential impact of planting of eucalypt trees as a strategy to reduce poverty in a less-favoured area of the highlands of Ethiopia. Results from simulations with a bio-economic model for a less-favoured case study area in the highlands are combined with survey data at community, household and plot level to assess how general the results of the bio-economic model are. Application of the bio-economic model shows clearly that land degradation, population growth, stagnant technology and drought threaten food security. Household welfare and land quality are deteriorating rapidly in the area and interventions are urgently needed to avoid human disaster. Planting of eucalypts on land unsuitable for crop production may substantially increase household incomes if market outlets for trees can be found. Tree planting will not have severe negative effects on food production or land conservation. A policy combining promotion of tree planting and conservation of cropland may achieve win-win benefits in terms of increased household incomes as well as more sustainable land-use. Analysis of survey data from the Amhara Region of Ethiopia reveals that there is a large area of land that is unsuitable for crop production located close to all-weather roads in the less-favoured areas of the region. Few trees have been planted on this type of land up to now. The past policy seems to have discouraged tree planting except on homestead plots that are more suitable for food crops. This paper reports part of the IFPRI/ILRI project ‘Policies for Sustainable Land Management in the East African Highlands’. These two agencies have provided funds and logistical support for the work. The Norwegian Ministry of Foreign Affairs has provided funds for this research in the Amhara Region in Ethiopia. The authors also draw on earlier work funded by Research Council of Norway. Any correspondence should be directed to the first author.     

Notes on genus Eurydoxa Filipjev （Lepidoptera： Tortricidae） in China

Genus Eurydoxa Filipjev in China is reviewed and noted for the first time. Based on the present study, two species are recognized, including rhodopa Diakonoff and advena Filipjev. All available information for the species is reviewed and provided.