High molecular weight glutenin subunits in some durum wheat cultivars investigated by means of mass spectrometric techniques

The primary structures of high molecular weight glutenin subunits (HMW-GS) of 5 Triticum durum Desf. cultivars (Simeto, Svevo, Duilio, Bronte, and Sant'Agata), largely cultivated in the south of Italy, and of 13 populations of the old spring Sicilian durum wheat landrace Timilia (Triticum durum Desf.) (accession nos. 1, 2, 3, 4, 7, 8, 9, 13, 14, 15, SG1, SG2, and SG3) were investigated using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) and reversed-phase high performance liquid chromatography/nanoelectrospray ionization mass spectrometry (RP-HPLC/nESI-MS/MS). M(r) of the intact proteins determined by MALDI mass spectrometry showed that all the 13 populations of Timilia contained the same two HMW-GS with 75.2 kDa and 86.4 kDa, whereas the other durum wheat cultivars showed the presence of the expected HMW-GS 1By8 and 1Bx7 at 75.1 kDa and 83.1 kDa, respectively. By MALDI mass spectrometry of the tryptic digestion peptides of the isolated HMW-GS of Timilia, the 1Bx and 1By subunits were identified as the NCBInr Acc. No AAQ93629, and AAQ93633, respectively. Sequence verification for HMW-GS 1Bx and 1By both in Simeto and Timilia was obtained by MALDI mass mapping and HPLC/nESI-MSMS of the tryptic peptides. The Bx subunit of Timila presents a sequence similarity of 96% with respect to Simeto, with differences in the insertion of 3 peptides of 5, 9, and 15 amino acids, for a total insertion of 29 amino acids and 25 amino acid substitutions. These differences in the amino acidic sequence account for the determined Δm of 3294 Da between the M(r) of the 1Bx subunits in Timilia and Simeto. Sequence alignment between the two By subunits shows 10 amino acid substitutions and is consistent with the Δm of 148 Da found in the MALDI mass spectra of the intact subunits.     

Derivative potentiometric stripping analysis (dPSA) used for the determination of cadmium,copper, lead,and zinc in Sicilian olive oils

Derivative potentiometric stripping analysis (dPSA) was utilized to evaluate the Cd(II), Cu(II), Pb(II), and Zn(II) content in olive oil samples produced in Sicily in the crop year 2000-2001. The repeatability of the method was attested at 86.36% for cadmium, at 94.94% for copper, at 99.00% for lead, and at 98.92% for zinc. Recovery tests were carried out, both on cleanup procedures and on extraction steps, on olive oil spiked at different levels; obtained recoveries were 84.52 +/- 9.86 for cadmium, 97.34 +/- 2.72 for copper, 100.68 +/- 0.67 for lead and 83.35 +/- 1.72 for zinc. Theoretic detection limits were 1.2 ng g(-1) for Cd, 3.6 ng g(-1) for Cu, 5.9 ng g(-1) for Pb, and 14.3 ng g(-1) for Zn. Found concentrations range were 15.94-58.51 ng g(-1) for Cu, 32.64-156.48 ng g(-1) for Pb, and 157.00-385.22 ng g(-1) for Zn. Copper, lead, and zinc were found in all samples. The main advantage of this determination consists of a not too aggressive metals extraction procedure using hydrochloric acid, which avoids losses of elements typical of sample calcinations methods.     

Determination of selenium in nuts by cathodic stripping potentiometry (CSP)

The aim of this work was to determine the selenium content in nut samples by cathodic stripping potentiometry. Dry-powdered nuts were digested by HNO(3) and dissolved with concentrated hydrochloric acid. To avoid the interference of natural oxygen, the potentiometric determination of selenium was carried out in an electrolyte solution consisting of 2 M CaCl(2) and 4 M HCl. The analysis was executed applying an electrolysis potential of -150 mV for 60 s and a constant current of -30 microA. Under these conditions, detection limits lower than 1.0 ng g(-)(1) were obtained for selenium analysis in nuts. The relative standard deviation of these measurements (expressed as rsd %) ranged from 0.44 to 0.88% while recoveries ranged from 90.2 to 95.3%. The results obtained with the proposed method were compared with those obtained via hydride vapor generation atomic absorption spectroscopy, a common method for determining selenium. The results of the two methods agreed within 5% for almond, hazelnut, and pistachio samples. The mean concentrations of selenium determined in Sicilian samples of almond, hazelnut, and pistachio were 531 +/- 1, 865 +/- 1, and 893 +/- 4 microg/kg, respectively.     

2,2'-Diphenyl-1-picrylhydrazyl radical-scavenging active components from adlay (Coix lachryma-jobi L. var. ma-yuen Stapf) hulls

An activity-directed fractionation and purification process was used to identify the antioxidative components of adlay hulls. Hulls of adlay (Coix lachryma-jobi L. var. ma-yuen Stapf) were extracted with methanol and then separated into water, 1-butanol, ethyl acetate, and hexane fractions. The 1-butanol-soluble fraction exhibited greater capacity to scavenge 2,2'-diphenyl-1-picrylhydrazyl (DPPH) radicals when compared with fractions soluble in water, ethyl acetate, and hexane phases. The 1-butanol fraction was then subjected to separation and purification using Diaion HP-20 chromatography, silica gel chromatography, and HPLC. Six compounds showing strong antioxidant activity were identified by spectroscopic methods ((1)H NMR, (13)C NMR, IR, and MS) and by comparison with authentic samples to be coniferyl alcohol (1), syringic acid (2), ferulic acid (3), syringaresinol (4), 4-ketopinoresinol (5), and a new lignan, mayuenolide (6).     

Determination of some heavy metals and selenium in Sicilian and Calabrian citrus essential oils using derivative stripping chronopotentiometry

This paper aims to bring some novelty about the concentration of some heavy metals and selenium in biological citrus essential oils (CEO) produced in Sicily and Calabria in different crop years. Derivative stripping chronopotentiometry has been used as an accurate, sensitive, and rapid technique for the determination of Cd, Cu, Mn, Ni, Pb, Zn, and Se in hydrochloric acid extracts of CEO; in the optimized electrochemical conditions, detection limits of <1 microg kg(-1) were obtained for all of the studied metals. In particular, the concentrations of metals were determined in biological bergamot essential oils produced in Calabria in 1999 and 2000 and in biological CEO produced in Sicily in 2003 and 2004. The obtained results provided evidence that Mn was the most abundant metal in all of the studied CEO followed by Zn, Ni, Cu, Pb, and Se; Cd concentrations were always lower than the limit of detection (0.6 microg kg(-1)).     

Bioguided fractionation and isolation of free radical scavenging components from in vitro propagated chinese medicinal plants Dendrobium tosaense Makino and Dendrobium moniliforme SW

This study was performed to investigate the free radical scavenging active components from in vitro propagated medicinal herbs of the genus Dendrobium, namely, Dendrobium tosaense Makino and Dendrobium moniliforme SW, using a 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical antioxidative assay. Seeds of the capsules derived after 12 weeks of hand-pollination germinated asymbiotically (50-74%) on half-strength Murashige and Skoog's (MS) basal medium with 3% sucrose and solidified with 0.9% Difco agar. Active growth in the germinated seedlings was achieved by reculturing on full-strength MS basal medium supplemented with 8% banana homogenate, 8% potato homogenate, 8% coconut water, 1.5% sucrose, and 0.9% Difco agar. Healthy plantlets transferred to plastic trays containing moss or moss and tree fern successfully acclimatized (84-100%) in the greenhouse. Extracts were prepared from plants grown in the greenhouse for a period of 6 months. Methanolic extracts of D. tosaense and D. moniliforme scavenged DPPH at 95.9 and 83.4%, respectively, at a concentration of 0.4 mg/mL. Therefore, methanolic solubles of D. tosaense and D. moniliforme were subjected to bioguided fractionation and separation by column chromatographic methods individually. After chromatographic separation of these crude extracts, the obtained fractions (Dm 1, Dm 2, Dm 3, Dt 1, Dt 2, and Dt 3) were tested for their activity. Among them, fractions Dm 2 and Dt 1 showed significant antioxidant activity by DPPH radical antioxidative assay. Active fractions were purified further by column chromatography and resulted in identification of the antioxidant components alkyl ferulates from D. moniliforme and quercetin from D. tosaense.     

Sensitivity and Error Limits of Two Tests for Distemper Virus Neutralizing Antibody: A Conventional Neutralization Test and the “Single Dilution-Probit Test”

The sensitivity and error limits of a conventional in ovo neutralization test for antibody to distemper virus were compared with the same parameters of a single dilution-probit test for neutralizing antibody.With the former test, antibody was demonstrable in ferrets 8 days following a single subcutaneous injection of virus while probit analysis of data from the single dilution test revealed the appearance of antibody as early as 4 days post-immunization. The error terms of the single dilution test were relatively large as compared to those of the conventional test for antibody.Distinctly biphasic antibody responses were observed in ferrets following a single subcutaneous injection of distemper virus.     

柑桔无病虫栽培试验初报

柑桔类的严重病虫主要由苗木带入新区,造成危害。因而培育不带有这些病虫的苗木(简称无病虫苗木),在隔离地点建立果园并采取防疫措施,殊为预防新果区发生此类病虫危害的根本办法。(林孔湘1975) 1974年春,我们开始采用热水消毒种子和采用洗刷接穗芽条并用蒸汽和药剂消毒接穗芽条的方法,在隔离地点培育各种柑桔类的无病虫实生苗和嫁接苗。1976年第一批无病虫苗木出圃,栽植在各地。在隔离和防疫条件不同的情况下,这些新果园发生的病虫危害有明显差异。隔离及防疫条件较好的果园,一年之后检查,除潜叶蛾外,没有发现任何其他病虫。而与有病虫的柑桔树接近的或虽有隔离而不注意防疫的果园,很快或不久便受到各种病虫侵害。试验结果表明,用无病虫苗木在隔离地点建立果园,并采用严格防疫措施,可长期不发生严重病虫的危害,既可保证不会发生黄龙病和斑黄病等类似病毒病的危害,又可节省喷药防病虫的费用。这是在国内外尚未见报道的一项技术革新。     

Evaluation of an antimicrobial resistance monitoring program for Campylobacter in poultry by simulation

An ideal national resistance monitoring program should deliver a precise estimate of the resistance situation for a given combination of bacteria and antimicrobial at a low cost. To achieve this, decisions need to be made on the number of samples to be collected at each of different possible sampling points. Existing methods of sample size calculation can not be used to solve this problem, because sampling decisions do not only depend on the prevalence of resistance and sensitivity and specificity of resistance testing, but also on the prevalence of the bacteria, and test characteristics of isolation of these bacteria. Our aim was to develop a stochastic simulation model that optimized a national resistance monitoring program, taking multi-stage sampling, imperfect sensitivity and specificity of diagnostic tests, and cost-effectiveness considerations into account. The process of resistance testing of Campylobacter spp. isolated from cloacal swab samples from poultry was modeled using a Markov Chain Monte Carlo model. Different sampling scenarios on the number of flocks to be tested, the number of birds from each flock, and the number of campylobacter colonies submitted to susceptibility testing were evaluated regarding the precision of the resulting prevalence estimate. Precision of the prevalence estimate was defined as the absolute difference between apparent and true prevalence of resistance. A partial budget approach was utilized to find the most cost-effective combination of samples to obtain a defined precision of the prevalence estimate. For a sampling scenario testing 100 flocks, five birds per flock, and one campylobacter colony per sample, the median error of the prevalence estimate was 2.5%, and 95% of the simulations resulted in an error of 7% or less. When the total number of samples was kept constant, maximizing the number of flocks tested, and only testing one bird per flock resulted in the most precise prevalence estimate. Submitting more than one campylobacter colony to resistance testing did not improve the prevalence estimate. Partial budget analysis indicated that the most cost-effective strategy was testing of two birds per flock, and submitting one colony per sample to resistance testing.