Evaluation of different extenders for the cold storage of meagre (Argyrosomus regius) semen

Meagre (Argyrosomus regius) is considered a potential candidate for aquaculture diversification in southern Europe. The main objective of this experiment was to develop a cold storage protocol for meagre semen to facilitate artificial reproduction techniques. Three extenders (non‐activating medium, 0.9% NaCl, and 0.9% NaCl with glycine and glucose) in three different sperm:extender dilutions (1:4, 1:9 and 1:19) were tested in a full factorial design. The quality parameters assessed along the storage time were the sperm motility, viable sperm percentage, adenosine triphosphate (ATP) content, and bacterial growth. The 0.9% NaCl and 0.9% NaCl with glycine and glucose extenders and the 1:4 and 1:9 dilutions maintained a higher sperm motility and a higher sperm linearity for a longer period time. Sperm viability was maintained at a higher value over a longer period with the 0.9% NaCl and 0.9% NaCl with glycine and glucose extenders. Sperm motility and viability appeared to be the main parameters showing the loss of semen quality during cold storage. Meagre semen demonstrated an ability to be stored for up to 10 days at 4°C when using 0.9% NaCl in a 1:4 dilution. These results contribute to a better understanding of the causes of fish semen quality deterioration during cold storage.     

Response of fungal and plant communities to management-induced overstorey changes in montane forests of the Western Carpathians

The effect of forest management on biodiversity is a crucial issue for sustainable forestry and nature conservation. However, the ways in which management affects macrofungal and plant communities and diversity of mountain temperate forests still remain poorly understood. We performed a random sampling stratified by stand age and stand type on the sites of temperate montane fir–beech forests. Diversity of macrofungi and the vascular plant understorey in beech- and spruce-dominated managed stands was investigated and compared to primeval forests located in the Po?ana Biosphere Reserve, Western Carpathians. Both the vascular plant and the macrofungal communities were altered by management, and the response of the macrofungal species (especially wood-inhabiting fungi) was more pronounced in terms of species composition change. Species turnover evaluation seems to be an important tool of forest natural status assessment, because alpha diversity did not change as much as species composition. Certain species of Carpathian primeval forests were confirmed as good indicators for natural forest change; others were proposed. Species pool and mean number of species per plot were the highest in unmanaged fir–beech forests, and species diversity significantly decreased in spruce plantations. The number of species decreased significantly due to the change of canopy tree species composition only in the macrofungal communities. As an outcome for forest management, we recommend keeping mixed forests involving all natural tree species and providing at least a minimal amount of dead wood necessary for wood-inhabiting organisms and leaving some area of unmanaged natural forests within complexes of managed stands.     

The impact of different land uses in urban area on humus quality

Purpose

In urban areas, humus quantity and quality depend less on natural environmental factors than on anthropogenic ones. The aim of the study was to assess the impact of different land use types of urban soils on the properties of soil organic matter (SOM).

Materials and methods

Thirty-five sites involving four ways of soil use were examined: lawns, allotment gardens, fallows, and arable lands. The study was conducted in Pruszków Town in the Warsaw Agglomeration, Central Poland. Lawns and allotment gardens were located in the central part of the town, whereas fallows and arable lands were in the peripheral zones. Humus horizons, to a depth of 0–20 cm, were analyzed. Using Na-pyrophosphate extraction, we determined the soluble SOM compounds (PY), and the organic matter in the extraction residue, considered as humins (HM). In a separate extraction (with 0.05 M H₂SO₄), low molecular weight (LMW) humus compounds were determined. The quantity of humic acids (HA) precipitated during Na-pyrophosphate extraction was determined as well. A spectroscopic method (UV-Vis) was used to characterize HA properties. The absorption coefficients E4/E6 were calculated based on the results of absorbance measurements involving 465- and 665-nm wavelengths of UV-Vis light. Statistical analyses were performed to find similarities and differences between soils differently used in Pruszków.

Results and discussion

The dominant part of the humus in the studied soils were humins HMs. There were two times more HM in the central part of the town than that in the peripheral zones. The same observation was made for soluble humus compounds (PY). The amount of LMW fractions was similar in soils of all uses. The degree of humification was small and averaged about 30% for all soils. Fulvic acid (FA) concentrations predominated over HA concentrations in all soils. The least condensed HA occurred in the allotment gardens with an E4/E6 ratio of 5.7, whereas the most condensed HAs were present in soil on arable lands (E4/E6 ratio of 4.7).

Conclusions

The studies have shown that the type of land use affects humus properties. The main differences were found to be in the quantity of humus compounds. Soils from the central part of the town contained more stable (HM) and soluble (PY) compounds than soils in the outskirts of town. PY compounds were characterized by a simple structure. Fulvic acids (FA) dominated in all of the studied soils (low HA/FA ratio). A high E4/E6 ratio indicates low maturity of humic fractions with low molecular weight compounds.

     

Quantitative and qualitative characterisation of humic products with spectral parameters

Purpose

The application of different humic products for the treatment of soils and plants has increased in recent years. The characteristics of humic products, such as the content and composition of organic carbon and the maturity, provide valuable information which is essential for an adequate application. Such information is crucial for manufacturers, business consultants and users involved in the production, distribution and implementation of humic products. This article presents the correlation between the quantitative indicators of commercial humic products and their spectral characteristics via measurements in the ultraviolet spectrum at 300 nm, in the visible area at 445 and 665 nm and in the near-infrared spectrum at 850 nm.

Materials and methods

We evaluated humic products (liquid and solid) of different origins. Via wet combustion, the content of total organic carbon in humic products can be determined. The precipitation of humic acids from the starting solution determines the composition of the humic products in terms of humic acids (HAs) and fulvic acids (FAs). The dissolution of HAs determines their concentration by titration, while the specific extinction can be assessed via spectrophotometry via measuring the absorption of HAs spectra at the following wavelengths: 300, 465, 665 and 850 nm. The degree of aromaticity and condensation of humic products determines the optical density of the HAs via the E₄/E₆ ratio.

Results and discussion

The content of total organic carbon varied widely from 0.55 to 37.5% across all groups. The content of carbon in HAs, as a percentage of the total carbon in fulvic-type humic products, ranged from 1.29 to 16.00%, while in humic-type products, it ranged from 51.43 to 91.92%. The minimum value of the E₄/E₆ ratio was 2.97, while the maximum value was 6.35. We observed a direct relationship between the dominant type of acids in humic products and the E₄/E₆ ratio.

Conclusions

The optical density of HAs indicates their quality characteristics. The presented optical characteristics for humic products show that there is a direct relationship, especially between HAs/FAs and E₄/E₆ ratios. Measurement at 300 nm (E₃₀₀) in the near-ultraviolet area and at 850 nm (E₈₅₀) in the near-infrared area can increase the range of the spectral study.

     

Pulp and Paper Mill Effluent Treated by Combining Coagulation-Flocculation-Sedimentation and Fenton Processes

Pulp and paper industries face serious environmental challenges, especially with regard to the conservation of water resources. Chemical thermal mechanical pulping (CTMP) is a process of pulping that combines chemical and mechanical pulping. This reduces the volume of water used in the process. But on the other hand, CTMP generates an effluent with high concentration of organic matter and is difficult to treat. This study evaluated the efficiency in the combination of physicochemical pretreatment by coagulation-flocculation-sedimentation (CFS) process and advanced oxidation process (AOP) by Fenton in sequence to treat CTMP effluent of a Brazilian industry. At first, the best treatment conditions for this type of effluent were determined. To evaluate the efficiency, pH, chemical oxygen demand, biochemical oxygen demand, total organic carbon, lignin contents, color, total phenolic contents, turbidity, and solids were measured before and after treatment. The acute toxicity on Daphnia magna was also determined. The treatment with CFS showed better results in the removal of solids and Fenton in the removal of recalcitrant compounds, such as lignin, demonstrating the need to use them in sequence. Combining CFS and Fenton to treat CTMP effluent allowed to achieve a removal efficiency of 95% for TOC, 61% for COD, and 76% for lignin contents.     

Lethal and sublethal responses of <Emphasis Type="Italic">Sitophilus zeamais</Emphasis> populations to essential oils

The present study aimed to assess the lethal and sublethal responses of five populations of S. zeamais to the essential oils of Ocimum basilicum and Piper hispidinervum, through toxicity, locomotor behavior (flight and walking activities) and physiological (respiration rate and body mass) evaluations. The populations of S. zeamais were obtained from Machado—MG, Paracatu—MG, Piracicaba—SP, Recife—PE and Tunápolis—SC. To estimate the LC₅₀ of each oil for each population, fumigation tests were performed. The population from Recife exhibited the lowest instantaneous rate of increase (ri) as well the lowest consumption of grain mass. However, Piracicaba was considered the susceptibility pattern, presenting the lowest LC₅₀ for both essential oils, no statistical difference was observed among populations or treatments in the flight activity bioassays. The essential oils effect on walking activity and respiration rates varied among populations. The population from Recife presented the highest walked distance and walk speed, with the lowest resting time and number of stops, as well as the lowest respiration rate and body mass. The present study highlights the importance of the study on population responses, as the five populations of S. zeamais exhibited different patterns of toxic and behavioral effects when subjected to the essential oils of P. hispidinervum and O. basilicum.     

Risk factors associated with the antimicrobial resistance of staphylococci in canine pyoderma

This study reports the susceptibility to antimicrobial agents of staphylococci (n=105) isolated from dogs, and the factors associated with this resistance. The study animals were 23 healthy dogs (group A), 24 with first-time pyoderma (group B), and 27 with recurrent pyoderma that had undergone long-term antibiotic treatment (group C). Staphylococci were more commonly isolated from the pyoderma-affected than the healthy dogs (p<0.0001). Some 78% of the isolates were resistant to at least one antimicrobial agent. Resistance to amoxicillin-clavulanate, cephalosporins (OR 4.29, 95% CI [1.15, 16.3] respectively), enrofloxacin (OR 9.47, 95% CI [1.53, 58.5]) and ciprofloxacin (OR 79.7 95% CI [3.26, 1947.4]) was more common among group C isolates. Some 32% of all the isolates were multiresistant (MR) and 10.4% were methicillin-resistant (MRS). The probability of isolating MRS staphylococci in group C increased by a factor of four (95% CI [1.18, 17.9]) compared to A plus B. Multi-resistant (MR) isolates were obtained more commonly from urban than rural dogs (OR 3.79, 95% CI [1.09, 13.17]). All the MRS staphylococci encountered were obtained from urban dogs and more commonly from male dogs (p=0.07). This study shows that dogs bred in urban habitat, with a history of antibiotic therapy in the past year represents significant risk of being carriers of isolates resistant to methicillin (MRS) and other antimicrobials. These factors should be considered before applying an antimicrobial treatment in veterinary clinics.