Analysis on Knowledge Sharing Under the Incomplete Information Condition

Knowledge sharing is the important way in which enterprises create organizational knowledge and obtain competition advantage.Scholars always have difference viewpoints about the motivators in knowledge sharing.This paper(analyzes) the incomplete information game and the choice of the motivators in knowledge sharing.If the knowledge(acceptant) offers motivators to the knowledge owner,knowledge sharing might make the participants obtain knowledge-sharing incomes.If knowledge-sharing incomes can make up the participants' costs,knowledge sharing can be caught through.Because the information of knowledge's value is incomplete,enterprises need knowledge managers and organizational additional motivators promote knowledge sharing.     

Vibration Analysis and System Simulation for a Stalled Wind Turbine

The aerodynamic characteristic of wind turbine is calculated by applying the Blade Element Momentum(BEM) theory.Also finite element mode analysis is done for the tower and the rotor.Then the multi-dynamic model of the wind turbine is built in Adams.Also the drive chain is calculated by applying state space method and programmed in Matlab/ Simulink.With that the combined simulation of vibration characteristics is carried out on the base of MATLAB/Simulink and ADAMS,in which the transmission effects and aero-elasticity coupling is fully considered.The results show that the method is able to simulate the vibration characteristic almost the same as software Bladed,which is well-known for analyzing performance and loads for the design and certification of wind turbines.     

New Algorithms for Data Discretization Based on Rough Set Theory

The discretization of real values is always one of the key problems to be solved in the domain of machine learning for its great contribution to speeding up the followed learning algorithms, cutting down the real demand of algorithms on running space and time, and improving the clustering capability of the ultimate learning results. The basic characteristics and framework of discretization approaches based on rough set model are analyzed at first, then the different measurements of the importance of candidate cuts are discussed and researched. Two new heuristic algorithms are put forward to finally select the useful cuts from a candidate set. The selected cuts of the two algorithms will adequately maintain the discernible relation of information systems for their full considering the specialty of rough set, which perfectly embodies the advantages of this theory. Moreover, excellent discretization results may be expected through these heuristic algorithms.     

酿酒葡萄延迟栽培方式的研究

利用西昌地区丰富的光热资源，以3年生真芳德和梅尔诺为试材，2000年在西昌正大葡萄试验园进行了酿酒葡萄延迟栽培的研究。摘除一次花序，对新梢分别在花后20、40、60、80d进行中梢修剪，逼迫冬芽萌发结果。结果表明：真芳德具有较强的冬芽副梢结果能力。在延迟栽培条件下，两品种的果实成熟期可推迟到11月上中旬。单株产量、果实可溶性固形物含量和总糖的最大值均出现在花后60d的处理中；各处理滴定酸均高于对照；出汁率随处理时间延迟而降低。两品种花后40、60和80d处理的果实黑痘病和白腐病的发生均低于对照。冬芽副梢成熟度良好。结果表明，延迟栽培能够有效调节葡萄成熟期并改善原料质量，但同时也造成产量的下降和生产周期的加长。     

单株幼龄苹果树修剪仿真研究

修剪是果树生产中重要的技术手段,要想研究更加合理的修剪技术体系,就必须保证能够对修剪反应有准确、直观和及时的判断,而仿真模拟技术提供了这种可能。以幼龄苹果树为研究对象,采用不同修剪处理对比的方法,在田间试验的基础上,总结修剪反应规律,构建苹果树结构和修剪模型。在此基础上基于Qt框架和OpenGL图形库,开发了单株苹果树修剪仿真软件平台。结合优化算法,通过仿真平台模拟了给定生产目标的修剪方案优化,优化结果对虚拟学习和实际生产提供了可视化指导。     

液压自由活塞发动机的节能方式研究

液压自由活塞发动机是将内燃机和液压泵集成于一体，实现动力非刚性传输的复合发动机。本文从其内部能量转换及外部能量回收两个方面，详细地分析和阐明了液压自由活塞发动机各种节能方式和实现途径，以液压挖掘机为例，强调液压自由活塞发动机作为中心液压站，结合二次调节及液压变压器技术，简单方便地实现群控节能。     

主动螺旋伞齿轮闭塞挤压的成形分析

分析了主动螺旋伞齿轮闭塞挤压的金属流动路线,设计了预制坯的形状。成形试验获得了金属充填齿形腔的流动模式,提出采用专用双动压力机或在通用压力机上采用特殊模具实现坯料双向挤压的成形方法。网格试验显示,塑性加工的螺旋伞齿轮金属纤维连续而致密,揭示了塑性加工齿轮强度高和使用寿命长的原因。刚塑性有限元模拟结果进一步揭示了螺旋伞齿轮塑性成形机理。有限元计算结果与试验结果的比较,证明采用有限元法研究螺旋伞齿轮闭塞挤压工艺是可行的。     

淀粉基质厌氧消化的氢分压变化状况

氢分压(PH_2)是厌氧消化中一项重要的状态参数。本研究进行基质淀粉的中温厌氧消化,观察不同状况下 PH_2变化。结果表明:1.具有不同优势类型产CH_4菌的反应器,对 PH_2变化的承受能力完全不同.2.由有机冲击负荷所造成的PH_2变化,其上升速度与基质类型有关。3.PH_2变化明显地受到有机负荷上升速率的影响。4.系统的自身缓冲能力也关系到 PH_2的变化。因此,本研究认为 PH_2作为厌氧消化有机负荷监控的唯一指标是不恰当的。     

低温和近中温猪粪液厌氧处理的装置比较研究

作了ＵＢＦ、ＵＡＳＢ和厌氧上折流反应器处理猪粪过筛液运行性能的实验室比较。结果表明：它们的运行指标基本一致。综合比较，ＵＢＦ略优于ＵＡＳＢ，ＵＡＳＢ略优于上折流反应器。在发酵温度１０℃段，负荷１．９～２．３ｇＣＯＤ／（Ｌ·ｄ），装置产气率平均０．３２～０．５１Ｌ／（Ｌ·ｄ），ＣＯＤ平均去除率８２．２％～９１．０％；１５℃段，负荷２．５～２．６ｇＣＯＤ／（Ｌ·ｄ），装置产气率０．５７～０．５９Ｌ／（Ｌ·ｄ）；２５℃段，负荷５．５～５．７ｇＣＯＤ／（Ｌ·ｄ），装置产气率１．９３～２．０１Ｌ／（Ｌ·ｄ）。     

混沌-步长加速法在营养液系统中的应用

将步长加速法与混沌优化方法结合,解决了混沌优化方法收敛速度慢和步长加速法只适合于局部寻优的缺陷.为此,介绍了无糖组培营养液循环控制系统的设计和构成,并采用混沌-步长加速法针对无糖组培营养液控制系统的PID控制器参数寻优,以实现营养液的自动调配.仿真结果表明:该优化方法搜索效率高,所得参数较好地满足了系统控制要求.