Magnetic Field and Plasma Observations at Mars: Initial Results of the Mars Global Surveyor Mission

The magnetometer and electron reflectometer investigation (MAG/ER) on the Mars Global Surveyor spacecraft has obtained magnetic field and plasma observations throughout the near-Mars environment, from beyond the influence of Mars to just above the surface (at an altitude of approximately 100 kilometers). The solar wind interaction with Mars is in many ways similar to that at Venus and at an active comet, that is, primarily an ionospheric-atmospheric interaction. No significant planetary magnetic field of global scale has been detected to date (<2 x 10(21) Gauss-cubic centimeter), but here the discovery of multiple magnetic anomalies of small spatial scale in the crust of Mars is reported.     

The structure of the upper atmosphere of mars: In situ accelerometer measurements from mars global surveyor

The Mars Global Surveyor (MGS) z-axis accelerometer has obtained over 200 vertical structures of thermospheric density, temperature, and pressure, ranging from 110 to 170 kilometers, compared to only three previous such vertical structures. In November 1997, a regional dust storm in the Southern Hemisphere triggered an unexpectedly large thermospheric response at mid-northern latitudes, increasing the altitude of thermospheric pressure surfaces there by as much as 8 kilometers and indicating a strong global thermospheric response to a regional dust storm. Throughout the MGS mission, thermospheric density bulges have been detected on opposite sides of the planet near 90 degreesE and 90 degreesW, in the vicinity of maximum terrain heights. This wave 2 pattern may be caused by topographically-forced planetary waves propagating up from the lower atmosphere.     

Immunisation of cattle against theileriosis in Coast Province, Kenya: laboratory evaluation of a Theileria parva parva stabilate for use in 'infection and treatment' immunisation in the field

Theileria parva parva Marikebuni stock, previously shown to give good protection to immunised cattle in Kilifi District, Coast Province of Kenya, was chosen for large scale immunisation in the district. A large sporozoite stabilate was prepared and evaluated for efficacy and safety in the 'infection and treatment' method, using a long or short acting formulation of oxytetracycline. Susceptible cattle were infected with selected doses of stabilate (10(0), 10(-1), 10(-1.7) and left either as untreated controls, or treated with one of the two oxytetracycline formulations. It was concluded that stabilate dilution at 10(-0.7) or 10(-1) in combination with either formulation of oxytetracycline would effect satisfactory immunisation. The short acting oxytetracycline treatment was judged to be the most efficacious in protecting cattle against homologous challenge. On heterologous challenge it was found that T p parva Marikebuni immune cattle were protected against seven T p parva stocks from Kilifi District and also against four stocks of T p parva from other areas of Kenya. In addition, the Marikebuni stock provided partial protection against challenge by T p lawrencei stocks. Furthermore, cattle immune to T p parva and T p lawrencei were protected against lethal challenge of T p parva Marikebuni stock. Thus, it appears that large scale immunisation of cattle against theileriosis in Kilifi District could be undertaken using the Marikebuni stock. With continued assessment, this stock could provide a master theilerial stock for immunisation against cattle theileriosis in areas free of buffaloes elsewhere in Kenya.     

Immunisation of cattle against theileriosis in Nakuru District of Kenya by infection and treatment and the introduction of unconventional tick control.

One hundred and one cross European-Boran cattle (50 cows and 51 calves), on a farm in Nakuru District, Kenya, were immunised against theileriosis using Theileria parva lawrencei and Theileria parva parva stocks from another district of Kenya. The stabilates used were T.p.lawrencei (Mara III) used at 10(-1.7) dilution and T.p.parva (Kilae) used at 10(-1.0) dilution. The stabilates were combined and inoculated simultaneously with a short-acting formulation of oxytetracycline hydrochloride given intramuscularly at 10 mg kg-1 body weight and was repeated on Day 4 after inoculation of the stabilate. Most of the theileriosis challenge on the farm was thought to be derived directly from the African buffalo (Syncerus caffer). Nine percent of the cattle had significant indirect fluorescent antibody (IFA) titres before the immunisation and 99% after immunisation. The immunised cattle were exposed to tick-borne disease challenge on the farm by withdrawal of acaricide cover. The immunised cattle were divided into five groups plus two susceptible control cows and two calves for each group. Cattle in four of the groups had acaricidal ear tags, each group having a different type, applied to both ears and the fifth group remained untagged. The animals remained without conventional acaricide application for 134 days. Ten out of 20 (50%) non-immunised control cattle became T.p.lawrencei reactors which only one out of 97 (1%) of the immunised cattle reacted. A frequent complication noted was mild infections due to unidentified Theileria sp. which required expert differentiation from T.parva infections. An additional group of ten steers whose tick load was removed by hand at weekly intervals was introduced 79 days after exposure; these had no tick control and four became T.p.lawrencei reactors. Of 12 calves born during the exposure period and without tick control, four became theilerial reactors and one died. The application of acaricidal tags however, reduced tick infestation levels considerably compared with untagged controls but did not prevent transmission of theileriosis with the possible exception of tags on Group 4. A number of transient low grade fevers were noted and attributed to Theileria sp., Ehrlichia bovis, Ehrlichia (Cytoecetes) ondiri and Borrelia theileri infections, none of which were fatal. One immunised animal died of acute dual infection of Babesia bigemina and Borrelia theileri after acaricide control by spraying was re-introduced but no Anaplasma infections were detected. An analysis of the economic effects of immunisation was made.     

Mechanical testing of a steel-reinforced epoxy resin bar and clamp for external skeletal fixation of long-bone fractures in cats

AIMS: To provide veterinarians with confidence when using a commercially available epoxy resin in external skeletal fixators (ESF), testing was conducted to determine exothermia during curing of the epoxy resin compared to polymethylmethacrylate (PMMA), the hardness of the epoxy resin as a bar over 16 weeks, and the strength of the epoxy resin bar compared with metal clamps in similarly constructed Type 1a ESF constructs simulating the repair of feline long bone fractures.

METHODS: Exothermia of the epoxy resin during curing was tested against PMMA with surface temperatures recorded over the first 15 minutes of curing, using four samples of each product. The hardness of 90 identical epoxy resin bars was tested by subjecting them to cyclic loads (1,000 cycles of 20.5?N, every 7 days) over a 16-week period and impact testing 10 bars every 2 weeks. Ten bars that were not subjected to cyclic loads were impact tested at 0 weeks and another 10 at 16 weeks. Strength of the epoxy resin product, as a bar and clamp composite, was tested against metal SK and Kirschner-Ehmer (KE) clamps and bars in Type 1a, tied-in intramedullary pin, ESF constructs with either 90° or 75° pin placement, subjected to compressive and bending loads to 75?N.

RESULTS: The maximum temperature during curing of the epoxy resin (min 39.8, max 43.0)°C was less than the PMMA (min 85.2, max 98.5)°C (p<0.001). There was no change in hardness of the epoxy resin bars over the 16 weeks of cyclic loading (p=0.58). There were no differences between the median strength of the epoxy resin, SK or KE ESF constructs in compression or bending when tested to 75?N (p>0.05). Stiffness of constructs with 75° pin placement was greater for SK than epoxy resin constructs in compression (p=0.046), and was greater for KE than epoxy resin constructs in bending (p=0.033).

CONCLUSIONS: The epoxy resin tested was found to be less exothermic than PMMA; bars made from the epoxy resin showed durability over an expected fracture healing timeframe and had mechanical strength characteristics comparable to metal bar and clamp ESF constructs.

CLINICAL RELEVANCE: The epoxy resin ESF construct tested in this study can be considered a suitable replacement for SK or KE ESF constructs in the treatment of feline long-bone fractures, in terms of mechanical strength.     

Effect of different mini‐volume colloid centrifugation configurations on flow cytometrically sorted sperm recovery efficiency and quality using a computer‐assisted semen analyzer

Straws of sex‐sorted sperm are usually packaged at a low concentration (e.g., ~2.1 × 10⁶ sperm/ml) and cost significantly more than unsorted conventional semen from the same sire. In order to maximize the efficiency of using sex‐sorted sperm under in vitro fertilization conditions, the selection of an appropriate sperm separation technique is essential. In this study, the effect of using different silane‐coated silica colloid dilutions and layering configurations during centrifugation of sex‐sorted sperm was examined over an extended period of incubation time. Sperm recovery and viability after centrifugation using the colloid separation technique were measured along with several sperm motility parameters using CASA. For this purpose, frozen and thawed sex‐sorted sperm samples were centrifuged using mini‐volume single‐layer (40%, 60% and 80%) and mini‐volume two‐layer (45%/90%, 40%/80% and 30%/60%) separation configurations using PureSperm^®. A single layer of 40% PureSperm^® recovered significantly more sex‐sorted sperm (78.07% ± 2.28%) followed by a single layer of 80% PureSperm^® (68.43% ± 2.33%). The lowest sperm recovery was obtained using a two‐layer PureSperm^® dilution of 45%/90% (47.57% ± 2.33%). Single‐layer centrifugation recovered more sorted sperm (68.67% ± 1.74%) than two layer (53.74% ± 1.74%) (p < .0001). A single layer of 80% PureSperm^® exhibited the highest sorted sperm viability (72.01% ± 2.90%) after centrifugation (p < .05). The mini‐volume single layer of 80% PureSperm^® was determined to be an effective alternative to a two‐layer centrifugation configuration for sex‐sorted sperm selection. In addition, single‐layer colloid dilution of 80% performed either as well as or significantly outperformed the other treatments, as well as the control, with regard to motility (MOT) for all time periods of analysis.