Research on a Novel Inverter of VSC

In order to improve waveform performance of light HVDC system, a lot of switches which operate in high frequency are used, which causes large switching losses and results high cost. A new Buck type voltage source converter(BVSC) is proposed. The new BVSC comprises a dual-buck converter and a three-phase inverter operating in grid frequency. Only two high frequency switches are used, which results good output waveform performance. In order to reduce the high frequency switching losses, a novel improved double-frequency Buck type voltage source converter(DBVSC) is also proposed. An additional dual-Buck converter is added to the BVSC, the added dual-Buck converter deals with the fundamental power that operates in low frequency, and BVSC only deals with harmonic power that operates in high frequency. The output waveform is enhanced and the switching losses are reduced in DBVSC, and the power rating is also increased. The DBVSC is very suitable for large power rating application. The one cycle control theory is adopted to control the proposed DBVSC with analog circuit, which is very simple. The proposed DBVSC and control method are verified by simulation.     

Influence of HVDC System on the Shaft of Hydro-generator Unit

Widely concerns of the influence of the HVDC system on the Three Gorges power station have been shown so far. Based on the understanding of the mechanism of the non-characteristic harmonics introduced by HVDC system, the influence of interharmonics on the shaft of hydro-generator unit is studied. A MATLAB simulation model for the Three Gorges hybrid AC and DC transmission system with considering the effect of generator-unit shaft is established. Through time-domain simulation, the influence of the minor-associated component of interharmonics on the generator-unit shaft is analyzed, which arise from the asynchronous operation of the HVDC system. Also, the complex torque coefficient method in frequency-domain is used to analyze this problem. Same conclusions can be drawn from the results of timedomain and frequency-domain analyses.     

Pricise Processing on 3D Surface with Laser

Studyin g the processin g tech n ology of mak in g holee by laser com plicated sur-face,and developing a CAD/CAM flexible manufacture system.     

The Reformation of the Construction Employment System and Building a Harmonious Society

Construction industry is not only the pillar industry in national economy,but also the typical industry with intensive labors.As a major part of the construction industry,the Construction Employment System(CES) is an important factor of the market order,as well as the quality,the safety and the development of the industry.It is also an important part for building a harmonious society.It concerns the social harmony,political harmony,societal harmony,cultural harmony,urban-rural harmony,etc.However,at present,there are still many problems in CES that might influence the harmonious society building.This paper advises to speed up the reformation of CES,to establish and consummate the system of construction labor subcontract,to develop vigorously labor subcontract corporations,to improve the quality of the labors,to ensure the rights and interests of the labor.     

Design of Vision System Based on Service Robot

A vision system based on the service robot is involved. In the system, picture signal is acquired by the picture sensor OV7635. Frame memory AL422B is used as data buffer memory, while CPLD controlled the time order DSP performed. In the software system of image processing, to accomplish color image segmentation and recognition, the threshold vector judgment and improved seed-fill algorithm is introduced, and the image geometric moment is calculated during the segmenting. In order to achieve a vision servo system which composed of image-based feedback and adaptive compensation, the deduced matrix-based Jacobian from the image moment is taken as image feature. Adopted the TFT LCD is adopted to straightly disolav the result of vision recognition and vision tracing.     

Study on Application of ''Design and Build'' Contract Mode

The 'Design and Build' contract mode is a new contract and managerial approach, to which more and more attention has been paid. Now it becomes the contracting tendency in the international construction market. In this paper, the basic theories and method of the 'Design and Build' mode are widely and systematically studied. It specifies the intention of the 'Design and Build'contract mode, existing problems and corresponding countermeasures as well as its developing direction.     

结构参数对水润滑橡胶合金轴承摩擦噪声的影响分析

为了研究水润滑橡胶合金轴承结构参数对其低速重载工况下摩擦噪声的影响,使用复模态分析方法建立了水润滑橡胶合金轴承系统仿真模型,采用专业仿真软件分析了不同摩擦系数及结构参数条件下摩擦噪声产生的概率,进而研究结构参数对摩擦噪声的影响,进行了平板型和圆弧型结构的水润滑橡胶合金轴承摩擦噪声的对比实验。研究结果表明,水润滑橡胶合金轴承的水槽半径大小、摩擦面形状以及摩擦副的摩擦系数对水润滑橡胶合金轴承的摩擦噪声有较大影响,而水槽的形状对轴承摩擦噪声的影响不大。对一定结构尺寸的水润滑橡胶合金轴承,水槽半径为4 mm、平面型摩擦面的结构可以大大减少轴承出现摩擦噪声的可能性,相关实验结果与计算结果是吻合的。