Herbicide tank-mixing for post-emergence weed control in sugar beets

Tank-mixtures of selective herbicides were evaluated for 2 years on field-grown sugarbeets under two weed flora situations: (a) mixed floras of broad-leaved and grass weeds and (b) weed floras of broadleaves grown beyond their stages of greatest sensitivity to herbicides. In these situations single herbicides usually fail to provide satisfactory post-emergence weed control in sugarbeets. Of several tank-mixtures, which could be devised for use in the first situation, ethofurnesate + Betanal AM 11, diclofop-methyl + Betanal AM 11 and diclofop-methyl + metamitron gave synergistic phytotoxicity to sugarbeet seedlings. Synergism in weed control, becoming apparent by an accelerated appearance of the herbicidal effects, was obtained with the mixture alloxydimeton + Betanal AM 11. This mixture was not phytotoxic and appears to be the most efficient for simultaneous control of broad-leaved and grass weeds. From trials in the second situation it became apparent that the activity of metamitron, which was reduced on older weeds, could be restored by mixing with a non-phytotoxic oil or a low dose of Betanal AM 11. These mixtures should be useful when growth of sugarbeets has been retarded by carried-over herbicides, drought, frost, etc.     

Associations between Energy Metabolism, LH Pulsatility and First Ovulation in early Lactating Cows

This study was designed to elucidate associations between energy metabolism and LH pulsatility characteristics in early lactation, and days to first ovulation, in order to explain the relationship between energy balance and fertility observed in epidemiological studies. To this end, 10 multiparous HF cows were monitored during lactation, after the application of two different feeding strategies during the dry period. Days to first ovulation was assessed using blood progesterone measurements and LH pulsatility was measured in 8-h windows in the third week postpartum. The association between depth of negative energy balance and days to ovulation was confirmed. However, this study does not support the idea that LH pulsatility characteristics in early lactation are predictive for the interval between parturition and first ovulation.     

Mechanische Fruchtbehangsregulierung bei Apfel verbessert Fruchtgröße,Fruchtfestigkeit, Fruchtausfärbung und die Source: Sink – Verhältnisse mit mehr Einzelfruchtständen (Singlets) bei ‘Gala’

The objective of the MSc project was to improve fruit quality, i.e. fruit firmness, colour and size, by mechanical blossom thinning. Ten-year-old slender spindle apple cv. ‘Gala, Mondial’ trees at Campus Klein-Altendorf near Bonn, Germany with an intense flowering of 7–8 on the 0–9 scale were blossom-thinned on 21 April 2009; unthinned trees served as control. Rotor speeds were 360 rpm or 420 rpm at 5 or 7.5 km/h tractor speed using the new mechanical thinning device developed at the University of Bonn in 2004–2006. Therein, a vertical mast supports three horizontal rotors, whose vertically rotating tines remove excessive flowers; the device was mounted on the front three point hitch of the tractor with the following results:

1. Mechanical thinning reduced the number of apple fruit from 18 per branch section in the un-thinned control, 12–13 in the medium to 8 fruit in the strongest thinning (420 rpm, 5 km/h).
2. Similarly, the number of singlets (one fruitlet/flower cluster) nearly doubled from ca. 2 per branch in the control to 3–4 after mechanical thinning, as intended.
3. The natural June drop after mechanical thinning resembled that in the un-thinned control.
4. Mechanical thinning increased fruit mass by 20 g—48 g relative to the un-thinned control.
5. Mechanical thinning with 420 rpm increased the portion of premium fruit >?70 mm (class I) by 43?% (7.5 km/h) and 63?% (5 km/h); combined mechanical and hand-thinning yielded the largest portion of fruit >?70 mm (70?%), but with a dramatic loss in yield (55?%).
6. Mechanical and manual thinning improved the portion of well coloured fruit (75–100?% coloured) (78–98?%) when compared to the un-thinned control fruits with 55?%, probably due to selective removal of shaded fruits from the inner tree canopy.
7. Overall, mechanical thinning alone gave better results than hand thinning alone or its combination with hand-thinning in cv. ‘Gala’; mechanical thinning waived the need for hand thinning in this experiment.
8. Mechanical thinning improved fruit firmness from 9.4 kg/cm² in the un-thinned control to 10.4 kg/cm².
9. Neither vegetative growth nor subsequent fruit drop were stimulated by this type of mechanical thinning.
10. The risk of both alternate bearing and over-sized fruit was waived due to the variety employed.
11. An economic evaluation showed a net profit of € 220/ha in the weak (420 rpm—7.5 km/h) aνô € 1,844/ha in the intermediate (360 rpm—5 km/h), but a net loss of € 1,120/ha (420 rpm—5 km/h) for the strongest thinning treatment, assuming a cost of € 120/ha for the mechanical treatment and a saving of € 200 for reduced hand thinning.

Overall, the positive results of a better fruit quality (size, colour and firmness) offer the potential of mechanical blossom thinning in cv. ‘Gala’, which is difficult to blossom-thin chemically.     

Mehr Chilling f��r Obstb?ume in w?rmeren Wintern?

The objective of this study was the calculation of winter chill for fruit trees in the Meckenheim fruit growing region for all winters since 1958 and the evaluation of long-term trends in response to global warming. A further objective was the comparison of three winter chill models, the Chilling Hours Model (Chilling Hours??CH), the Utah Model (Chill Units??CU) and the Dynamic Model (Chill Portions??CP) with respect to temporal trends and seasonal variation in chilling intensity. To meet these objectives, about 120,000 hourly temperature measurements from Klein-Altendorf were correlated with daily temperature extremes. From this relationship, a long-term record of 466,000 hourly temperature data was constructed and used to calculate winter chill between 1st October of each year and three dates of the following year for all winters since 1958/1959. On average over all years, 955 CH, 1160 CU and 58.0 CP had accumulated in the Meckenheim fruit growing region by 1st January, 1356 CH, 1527 CU and 77.3 CP by 1st February, and 1727 CH, 1883 CU and 96.1 CP by 1st March. Coefficients of variation varied between 14 and 16% for the Chilling Hours Model, between 18 and 19% for the Utah Model and between 9 and 10% for the Dynamic Model. In spite of significant warming of the site, no clear long-term trends were detected. Due to the structure of the winter chill models, which do not consider freezing temperatures as chilling-effective, the highest chilling was not registered in the coldest winters, but rather when average temperatures between early December and late February were between 2 and 6°C. The coldest winter on record (1963/1964; mean winter temperature of ??4°C) had by far the lowest winter chill total, and chilling during the more recent cold winters 2009/2010 and 2010/2011 was also below average. Only very pronounced warming reduced winter chill, with the warmest winter on record (2006/2007; mean winter temperature of 7.1°C) accumulating less winter chill than slightly cooler winters. As long as such extreme temperatures remain exceptional, fulfilment of chilling requirements of local apple and cherry cultivars should not become critical. It is important to note, however, that substantial knowledge gaps exist in the field of fruit tree dormancy, which will have to be closed, before more reliable projections of future fulfilment of chilling requirements can be made.     

Mechanische Fruchtbehangsregulierung verringerte den Junifruchtfall und verbesserte die Fruchtqualität und Fruchtgröße bei ‚Conference‘- und ‚Alexander Lucas‘-Birnen

In the absence of any chemicals approved for thinning pears but market demand for large particularly cv. ‘Conference’ fruit, the objective of the present study as part of a MSC thesis was to improve fruit quality i.e. achieve these fruit sizes by mechanical blossom thinning. Therefore, 18-year-old cv. ‘Conference’ pear trees, trained as super spindles, on quince A rootstock with a spacing of 4?×?0.4 m were used in Klein-Altendorf near Bonn, Germany; cv. ‘A. Lucas’ and un-thinned trees served as control. These pear trees with intense flowering were blossom-thinned on 15 April 2009 with rotor speeds of either 300 rpm or 400 rpm both at 5 km/h tractor speed with the new mechanical thinning device developed at the University of Bonn in 2004–2006. Therein, a vertical mast supports three horizontal rotors, whose vertically rotating tines remove excessive flowers; the device is mounted on the front three point hitch of the tractor. In 2009, a year with severe June drop, mechanical thinning reduced the intensity of the natural June drop with increasing rotor speed and was stronger reduced in cv. ‘A. Lucas’ (by ?38%) than in cv. ‘Conference’ (by ?27% relative to the control). In cv. ‘A. Lucas’, the natural June drop was as strong as mechanical thinning and resulted in large-sized 80 mm pear fruit in the control; mechanical thinning with 400 rpm further increased fruit mass by 16 g relative to the un-thinned control or 6 g larger than in the thinning with 300 rpm. In cv. ‘Conference’, fruit fell within the next larger fruit size class after the stronger mechanical thinning with 400 rpm at 5 km/h: the portion of pear fruit in the 75/80 mm size class was 2 fold and in the 80/85 mm size class was 6 fold that in the control. The portion of <?60, 60/65 mm and 65/70 mm fruit was halved relative to the control; the average fruit mass was increased by 40 g. Vegetative growth appeared unaffected by mechanical thinning. The risk of both over-sized fruit and over-thinning appears small, since mechanical thinning reduced the natural June drop and did not induce subsequent fruit drop. Mechanical thinning was more efficient in cv. ‘Conference’, as intended, despite more intense flowering in cv. ‘A Lucas’. An economic evaluation proved difficult, since the natural June drop particularly in cv. ‘A. Lucas’ led to large-sized fruit (80 mm) in the control, and any (mechanical) thinning is associated with lower yields (?26% in cv. ‘Conference’ and ?12% in cv. ‘A. Lucas’). Overall, the results indicate the potential of mechanical thinning as a substitute (or combination partner for chemical thinning if approved) in pear.     

Three phase elimination of oxytetracycline in veal calves; the presence of an extended terminal elimination phase

The pharmacokinetics of oxytetracycline were studied after both intravenous (i.v.) and intramuscular (i.m.) administration to a group of five veal calves. Blood samples were taken frequently during the terminal elimination phase in order to calculate a reliable elimination rate constant. Because of the low limit of quantification of the method of analysis used, oxytetracycline plasma concentrations could be monitored over a 12-day period of time.
After the intravenous administration of oxytetracycline, data were fitted according a three-compartment model. After i.m. administration, plasma-concentration-time curves could best be described by a two-compartment model. It was demonstrated that a very slow terminal elimination phase was present both after i.v. and i.m. administration with a half-life of approximately 95 h. The data show that this phase cannot be explained by slow absorption from the injection site and that release of oxytetracycline incorporated into bone is not a likely explanation.     

Histomorphometrische und histologische Untersuchungen zur morphokinetischen Wirkung von Furazolidon auf die Spermiogenese geschlechtsreifer Ratten

The antispermatongenic effects of furazolidone on the testes of mature Wistar rats were investigated using histological and morphometric methods. The sections showed a varying degree of depopulation of the germinal epithelium, a shrinking and a deformation of the Tubuli contorti, and an enlargement of the intertubular lymphatic sinuses. The strain led to a standstill in the spermatogenesis at the primary-spermatocyte stage. After administering furazolidone, the following results could be seen: – a weightloss of up to 42.1% and a decrease in testes volume by up to 30.2% – a decrease in the volume of the nuclei of the Leydig-cells by up to 51.6% – a reduction in the diameter, perimeter and area covered by Tubuli seminiferi contorti of up to 33.5%, 30.8%, and 53.4%, respectively – an increase in the number of Tubuli seminiferi contorti per mm2 by up to 44.8% – a decrease in the percentage of Tubuli seminiferi contorti of the total testes tissue by up to 39.1%     

中国东南地区两土链土壤中土壤性质和水稻产量的空间变异研究

In the light of an increasing demand for staple food, especially rice, in southeast China, investigations on the specific site potential expressed as the relationship between soil and crop yield parameters gain increasing importance. Soil texture and several soil chemical parameters as well as plant properties such as crop height, biomass and grain yield were investigated along two terraced catenas with contrasting soil textures cropped with wet rice. We were aiming at identifying correlative relationships between soil and crop properties. Data were analyzed both statistically and geostatistically on the basis of semivariograms. Statistical analysis indicated a significant influence of the relief position on the spatial distribution of soil texture, total carbon and total nitrogen contents. Significant correlations were found for the catena located in a sandstone area （Catena A） between rice yield and silt as well as total nitrogen content. Corresponding relationships were not detectable for paddy fields that developed from Quaternary clays （Catena B）. As suggested by the nugget to sill ratio, spatial variability of soil texture, total carbon and nitrogen was mainly controlled by intrinsic factors, which might be attributed to the erosional transport of fine soil constituents, indicating the importance of the relief position and slope in soil development even in landscapes that are terraced. The crop parameters exhibited short ranges of influence and about one third of their variability was unexplained. Comparable ranges Of selected crop and soil parameters, found only for Catena A, are indicative of close spatial interactions between rice yield and soil features. Our findings show that especially in sandstone-dominated areas, a site-specific management can contribute to an environmentally safe rice production increase.     

Paleoindians in beringia: evidence from arctic alaska

Excavations at the Mesa site in arctic Alaska provide evidence for a Paleoindian occupation of Beringia, the region adjacent to the Bering Strait. Eleven carbon-14 dates on hearths associated with Paleoindian projectile points place humans at the site between 9,730 and 11,660 radiocarbon years before present (years B.P.). The presence of Paleoindians in Beringia at these times challenges the notion that Paleoindian cultures arose exclusively in mid-continental North America. The age span of Paleoindians at the Mesa site overlaps with dates from two other cultural complexes in interior Alaska. A hiatus in the record of human occupation occurs between 10,300 and 11,000 years B.P. Late Glacial climatic fluctuations may have made northern Alaska temporarily unfavorable for humans and spurred their southward dispersal.     

Weed Suppression of Living Mulch in Sugar Beets

Weed suppression in sugar beets (Beta vulgaris.) is commonly achieved with two to three post-emergent herbicide applications across the entire field. Field studies were performed, in order to investigate the weed suppressing ability of Medicago lupulina, Trifolium subterraneum and a mixture of Lolium perenne and Festuca pratensis as living mulches in sugar beet at four locations in South Germany during 2014 and 2015. Living mulches were sown 2 and 30 days after sowing (DAS) of sugar beet. Weed densities ranged from 0 to 143 plants m^?2 with Chenopodium album, Polygonum convolvulus and Polygonum aviculare being the most abundant weed species. It has been found that living mulches could reduce herbicide input up to 65?%. Weed suppression of living mulch was highest with Trifolium subterraneum (71?%). The early sown living mulches (2 DAS) revealed a 28 g m^?2 higher biomass compared to late sowing (30 DAS). However, no any linear correlation was found between living mulch biomass and weed suppression. White sugar yield (WSY) was highest in the herbicide treatments (12.6 t ha^?1). Trifolium subterraneum yielded the highest WSY of the living mulches with 11.1 t ha^?1 across all locations. Our work reveals that living mulch can play a major role in integrated plant protection by reducing herbicides in sugar beet production.