Mechanical performance of a screw-type veterinary suture anchor subjected to single load to failure and cyclic loads

OBJECTIVE: To characterize the mechanical performance of a veterinary bone anchor under static and cyclic loads. STUDY DESIGN: Mechanical testing study. ANIMALS: Cadaveric canine humeri. METHODS: Humeri (6 pairs) were collected from skeletally mature dogs (mean [+/-SD] age, 17.2+/-2.1 months; weight, 20.8+/-1.5 kg). Bone anchors were inserted in the proximal metaphysis using nylon, and were longitudinally extracted. For the opposite humerus, anchors were subjected to longitudinal cyclic load (50% of the load at failure of their pair) for 1200 cycles then longitudinally loaded to failure. Anchors were then installed in a similar and adjacent area of these 2(nd) humeri with nylon and cyclically tested perpendicular to the axis of anchor insertion (100% of the longitudinal holding power of their pair) for 1200 cycles, then perpendicularly loaded to failure. Paired t-tests were used to compare holding power before and after longitudinal cyclic testing. RESULTS: Longitudinal holding power of the screw-type anchor in the proximal humerus was 385+/-30 N. Anchor pullout was the only mode of failure. Anchors in the paired humeri did not fail after 1200 cycles of 50% longitudinal loading, and post-cycle holding strength was not different (335+/-87 N; P=.32). Perpendicularly loaded anchors did not fail after 1200 cycles of 100% of opposite longitudinal holding strength, and had post-cycle perpendicular holding strengths of 514+/-72 N. Suture breakage was the mode of failure. CLINICAL RELEVANCE: Bone anchor holding strength is dependent on orientation of suture load. Screw-type bone anchor holding strength was not affected by longitudinal cyclic loading, and holding strengths of approximately 385 N can be expected in metaphyseal bone of large-breed mature dogs. Perpendicularly loaded anchors have higher failure loads, and holding strength of approximately 514 N can be expected in metaphyseal bone of the proximal humerus.     

Mechanical testing of 3.5 mm locking and non-locking bone plates

Locking plate technologies are being developed in order to provide the surgeon with advantages over previous bone plate systems (both locking and non-locking). Locking plate systems possess inherent biological advantages in fracture fixation by preserving the periosteal blood supply, serving as internal fixators. It is important to consider the strength of each orthopaedic implant as an important selection criterion while utilizing the reported advantages of locking plate systems to prevent catastrophic fracture failure. Mechanical testing of orthopaedic implants is a common method used to provide a surgeon with insight on mechanical capabilities, as well as to form a standardized method of plate comparison. The purpose of this study was to demonstrate and to quantify observed differences in the bending strength between the LCP (Limited Contact Plate), LC-DCP, 3.5 mm Broad LC-DCP (Limited Contact Dynamic Compression Plate), and SOP (String of Pearls) orthopaedic bone plates. The study design followed the ASTM standard test method for static bending properties of metallic bone plates, which is designed to measure mechanical properties of bone plates subjected to bending, the most common loading encountered in vivo. Single cycle four point bending was performed on each orthopaedic implant. The area moment of inertia, bending stiffness, bending strength, and bending structural stiffness were calculated for each implant. The results of this study demonstrated significant differences (p<0.001) in bending strength and stiffness between the four orthopaedic implants (3.5 Broad LC-DCP>SOP>LCP=LC-DCP). The 3.5 mm LCP should be expected to provide in vivo strength and stiffness similar to a comparable LC-DCP. The SOP should provide strength and stiffness that is greater than a comparable LC-DCP but less than a 3.5 mm Broad LC-DCP.     

Thoracoscopic pericardiotomy as a palliative treatment in a cow with pericardial lymphoma

A 5-year-old Holstein cow, pregnant with a valuable calf, was presented with signs of heart failure (tachycardia, peripheral edema, and distended jugular veins) related to pericardial lymphoma and associated cardiac tamponade. In addition, pleural effusion was present in both hemithoraces. Medical treatment, which consisted of repeated pericardiocenteses, placement of indwelling pleural catheters, administration of intravenous fluid therapy, antibiotics and anti-inflammatory drugs, was ineffective in controlling recurrence of clinical signs despite a temporary improvement. A standing thoracoscopic pericardiotomy was performed in an attempt to reduce clinical signs of heart failure and to prolong life. Clinical signs of heart failure abated and no recurrence was seen. Standing thoracoscopic pericardiotomy along with possible corticosteroids can be recommended as palliative treatment in an effort to extend life for reproductive performance in genetically valuable animals.     

PrP genotyping of Austrian sheep breeds

Scrapie, an ovine and caprine transmissible spongiforme encephalopathy, is widely spread among sheep populations in many European countries. As it is known that susceptibility to scrapie is determined genetically, breeding programmes aiming at providing scrapie-resistant flocks have been established. Selection is based on the prion protein (PrP) genotype, which is used to classify animals into risk groups of susceptibility (R1-R5) according to the amino acids encoded by codons at positions 136, 154 and 171, respectively. At position 136 (136V-->136A) alanine and at position 154 (154H-->154R) as well as 171 (171Q-->171R) arginine are the favoured amino acids. Whereas PrP genotyping data are available for many of the European sheep breeds, comparable data for local Austrian sheep breeds are missing. The most known among these are Tyrolean mountain sheep, forest sheep. Tyrolean stone sheep and Carynthian sheep. The genotypes of 112 sheep from these four local breeds were determined. In terms of PrP genetics, Austrian breeds belong to the group of non-valine-breeds, with the exception of the Carynthian sheep, that exhibited a frequency of 136V of 4.2%. The most frequent allele was ARQ with 64.6-71.2% (depending on the breed), followed by ARR (14.8-25.8%). In contrast to the above-mentioned findings, scrapie has never been diagnosed in any of the Austrian sheep breeds. Native Austrian sheep breeds exhibit a very robust constitution, a pronounced adaptation to harsh climates and good reproduction parameters as well as a marked mother instinct. Therefore, these breeds are often used in crossbreeding programmes. Beside the above-mentioned characteristics, our results indicate that the investigated breeds may be effectively used in crossing-out breeding programmes for eliminating valine at position 136 of PrP.