Polyuria and Polydipsia and Disturbed Vasopressin Release in 2 Dogs With Secondary Polycythemia

In dogs, secondary polycythemia (SP) may be associated with polyuria and polydipsia (PU/PD). The pathogenesis of this PU/PD has not yet been explained. We hypothesized that hyperviscosity and increased blood volume in SP might affect vasopressin (VP) release, resulting in PU/PD. This hypothesis was tested in 2 dogs with SP caused by renal neo-plasia and PU/PD. Osmoregulation of VP release was studied by a modified water deprivation test and by investigating the VP response to hypertonic saline infusion.
Water deprivation test results were consistent with an inability to produce concentrated urine despite increasing plasma osmolality. During hypertonic saline infusion, the osmotic threshold of VP release was markedly increased in both dogs, resulting in a delayed VP response to increasing plasma osmolality. The sensitivity of VP release was low normal in both dogs. We conclude that blood hyperviscosity and increased blood volume led to impaired VP release and polyuria.     

Neutral hydrogen survey of andromeda galaxy

A neutral hydrogen survey of the Andromeda galaxy (M31) has been conducted with the 260-foot (80m) Ohio State University radio telescope. The neutral hydrogen is concentrated in the spiral arm regions, with but relatively small amounts near the center of the galaxy. Similar deficiencies have been found near the center of M33 and our galaxy, suggesting similar evolutionary processes in the three galaxies.     

Mechanical performance of a screw-type veterinary suture anchor subjected to single load to failure and cyclic loads

OBJECTIVE: To characterize the mechanical performance of a veterinary bone anchor under static and cyclic loads. STUDY DESIGN: Mechanical testing study. ANIMALS: Cadaveric canine humeri. METHODS: Humeri (6 pairs) were collected from skeletally mature dogs (mean [+/-SD] age, 17.2+/-2.1 months; weight, 20.8+/-1.5 kg). Bone anchors were inserted in the proximal metaphysis using nylon, and were longitudinally extracted. For the opposite humerus, anchors were subjected to longitudinal cyclic load (50% of the load at failure of their pair) for 1200 cycles then longitudinally loaded to failure. Anchors were then installed in a similar and adjacent area of these 2(nd) humeri with nylon and cyclically tested perpendicular to the axis of anchor insertion (100% of the longitudinal holding power of their pair) for 1200 cycles, then perpendicularly loaded to failure. Paired t-tests were used to compare holding power before and after longitudinal cyclic testing. RESULTS: Longitudinal holding power of the screw-type anchor in the proximal humerus was 385+/-30 N. Anchor pullout was the only mode of failure. Anchors in the paired humeri did not fail after 1200 cycles of 50% longitudinal loading, and post-cycle holding strength was not different (335+/-87 N; P=.32). Perpendicularly loaded anchors did not fail after 1200 cycles of 100% of opposite longitudinal holding strength, and had post-cycle perpendicular holding strengths of 514+/-72 N. Suture breakage was the mode of failure. CLINICAL RELEVANCE: Bone anchor holding strength is dependent on orientation of suture load. Screw-type bone anchor holding strength was not affected by longitudinal cyclic loading, and holding strengths of approximately 385 N can be expected in metaphyseal bone of large-breed mature dogs. Perpendicularly loaded anchors have higher failure loads, and holding strength of approximately 514 N can be expected in metaphyseal bone of the proximal humerus.     

Fungi isolated from bovine udders,and their possible sources

AIM: To identify fungi isolated from infections of the bovine mammary gland, and establish their possible sources.

METHODS: From a herd of 420 cows, milk samples were collected from all quarters at calving and cultured to detect causative organisms. Quarters identified as infected with fungi were further sampled during early lactation. Samples from feedstuffs, the feed pad and ends of teats were also collected and analysed for the presence of fungi.

RESULTS: Eleven of 420 cows were diagnosed with intramammary infections (IMI) caused by yeasts (nine cows, 10 quarters) and moulds (two cows, three quarters). Six of the yeast species had previously been reported as being responsible for mastitis. Elevated somatic cell counts (SCC) were observed in many quarters, but most infections were eliminated spontaneously. Two of the fungi isolated from milk samples were also isolated from feedstuffs and teat swabs, and seven other fungi isolated from milk samples were not isolated from feed, the feed pad or cows' teats.

CONCLUSIONS: Isolation of fungi from the udder is rarely reported in dairy cows in New Zealand. In this herd, contamination of the end of the teat originating from feedstuffs and possibly exacerbated by the use of a feed pad may have led to the establishment of IMI caused by fungi.

CLINICAL RELEVENCE: Fungi are infrequently if ever reported in mastitis trial data or surveys in New Zealand and are probably of little clinical significance.     

Assessment of Different Functional Parameters of Frozen–Thawed Buffalo Spermatozoa by Using Cytofluorimetric Determinations

Flow cytometry is a useful tool that provides an accurate, objective and rapid evaluation of semen quality. The use of this technique could significantly improve the quality of buffalo semen samples used in artificial insemination. This study was carried out to evaluate, by flow cytometry, frozen–thawed buffalo spermatozoa quality parameters such as sperm viability by SYBR‐14/propidium iodide staining; mitochondrial function by JC‐1 potentiometric probe; sperm chromatin stability (SCSA) by acridine orange; and acrosome reaction (AR) by FITC‐PNA staining. Semen samples from five Italian Mediterranean buffalo bulls were used. Sperm viability was not different between bulls and ranged from 33.4% to 43.6%. A consistent rate (55.1 ± 10.8%) of sperm cells showed high mitochondrial membrane potential (Δψ^high), with no significant differences between subjects. Sperm chromatin structure assay differed significantly between the five buffalo bulls; moreover, data showed high stability within each buffalo. DNA fragmentation indexes (DFI), such as %‐DFI, ‐DFI, SD‐DFI, were 11.2 ± 8.6, 153.3 ± 24.6 and 81.6 ± 21.2, respectively. Regarding AR, the percentage of acrosome‐reacted live (ARL) and acrosome‐reacted dead (ARD) spermatozoa was 0.3 ± 0.2 and 15.3 ± 5.5, respectively. This functional parameter differed significantly between buffalo bulls and showed high stability. Following to Ca²⁺ ionophore A23187 for 3 h, AR significantly differed between subjects and was characterized by an increase in both ARL (10.8%) and ARD population (22.0%). This study indicates that flow cytometry could be a useful tool for a quick multiparametric evaluation of sperm quality in buffalo. In particular, SCSA and AR resulted in sperm functional parameters sensitive enough for the diagnosis of frozen‐thawed semen fertilizing potential.     

Mechanical testing of 3.5 mm locking and non-locking bone plates

Locking plate technologies are being developed in order to provide the surgeon with advantages over previous bone plate systems (both locking and non-locking). Locking plate systems possess inherent biological advantages in fracture fixation by preserving the periosteal blood supply, serving as internal fixators. It is important to consider the strength of each orthopaedic implant as an important selection criterion while utilizing the reported advantages of locking plate systems to prevent catastrophic fracture failure. Mechanical testing of orthopaedic implants is a common method used to provide a surgeon with insight on mechanical capabilities, as well as to form a standardized method of plate comparison. The purpose of this study was to demonstrate and to quantify observed differences in the bending strength between the LCP (Limited Contact Plate), LC-DCP, 3.5 mm Broad LC-DCP (Limited Contact Dynamic Compression Plate), and SOP (String of Pearls) orthopaedic bone plates. The study design followed the ASTM standard test method for static bending properties of metallic bone plates, which is designed to measure mechanical properties of bone plates subjected to bending, the most common loading encountered in vivo. Single cycle four point bending was performed on each orthopaedic implant. The area moment of inertia, bending stiffness, bending strength, and bending structural stiffness were calculated for each implant. The results of this study demonstrated significant differences (p<0.001) in bending strength and stiffness between the four orthopaedic implants (3.5 Broad LC-DCP>SOP>LCP=LC-DCP). The 3.5 mm LCP should be expected to provide in vivo strength and stiffness similar to a comparable LC-DCP. The SOP should provide strength and stiffness that is greater than a comparable LC-DCP but less than a 3.5 mm Broad LC-DCP.