巢湖沿岸圩区稻季营养盐的输出特征研究

巢湖流域沿岸分布着很多圩区,人们在圩内进行各种农业活动,圩区营养盐的输出是造成巢湖流域非点源污染的重要因素。为了解圩区农业非点源营养盐的输出特征,笔者通过在巢湖流域河网地区选择比较典型的圩区,于2014年水稻生长期进行了较系统的野外调查观测、取样和室内水质分析,探讨在自然降雨-径流的条件下圩区各类营养盐的浓度变化及输出特征。2014年稻季共进行了9次排水,排水量总计73.09 mm,径流系数为0.37,9次排水事件总氮(TN)和总磷(TP)的平均浓度分别是3.42、0.22 mg/L,圩区水体处于富营养化水平。降雨-径流强度是影响营养盐浓度变化的重要因素,稻季生长期内TN和TP的输出量是0.28、0.017 kg/hm2,占稻季施肥总量的1.7%和0.16%。径流量是影响营养盐输出总量的关键因素,同时施肥量和施肥至排水事件的间隔天数也是是影响营养盐输出的重要因素。     

不同供磷水平小麦苗期根系特征与其相对产量的关系

研究了缺磷条件下不同基因型小麦苗期根系形态学及生理学适应特征 ,结果表明 :在缺磷环境中 ,小麦根轴数量和侧根长度明显减小 ,同化物向根部的分配比例增加 ,根轴长度、侧根数量和根系长度等均是显著提高。供试基因型小麦的根轴数量及其长度的差异在每个供磷水平及不同供磷水平之间均是显著的 ,说明这两种性状的差异是由基因型和环境因素共同决定的 ;而侧根特征的差异只在不同供磷水平之间是显著的 ,表明侧根性状主要是受环境因素控制的。对 6种基因型小麦的研究表明 ,高磷水平的小麦种子根的生长角度明显低于低磷处理的小麦 ,根角之间存在着显著的基因型差异。在缺磷条件下 ,6种基因型小麦完整根系分泌的酸性磷酸酶活性、根轴数量、根轴长度、根生长角度和根系长度之间均存在着显著的基因型差异。相关分析表明 ,缺磷条件下的小麦苗期根系形态指标和根系分泌的酸性磷酸酶活性的交互作用与小麦的相对产量之间具有显著的线性关系 ,这种关系说明以上 5种性状均可作为早期有效地筛选磷高效小麦品种的指标     

Analysis on Sustained Release of Protein from Microcapsule Prepared by Alginate

The paper studies a drug deliversy system for protein and find the optimum preparation condition.Cross-linked alginate(Alg) microcapsule was used to prepare microcapsule for protein,using bovine serum album(BSA) as a model drug.Effect of different cations and content of protein on configuration,size and enveloped rate of microcapsule were investigated.It is shown that Ba-Alg microcapsule has steady configuration,homogeneous size and high-enveloped rate.Also electrophoresis of native BSA before microencapsulation and after microencapsulation is measured by(SDS-PAGE),it is found that no significant change is observed BSA integrity.Release of BSA from microcapsule in vitro presents sustained release in some extent,and initial burst effect is significantly obvious.Microenpsulation drug in alginate will be a wishful drug delivery system.     

Optimization of Energy Dissipation Braces in Frame Structures

In this paper, the complex method of the nonlinear programming is used to optimize the parameters of energy dissipation bracing in energy dissipation braced frame. This method is realized with computer program and proved to be efficient. A 6-story reinforced concrete frame is used as a demonstrative example.     

Expert System for Artificial Intelligence Blast Furnace Smelting Process

In order to upgrade traditional industry and realize the automation of furnace condition judgement and standardization of operation, an expert system for various furnace conditions and breakdown judgement and operation guidance on blast furnace are developed based on the theory of artificial intelligence and knowledge engineering. The system is fulfilled through C++Builder and combined with the actual production picture. The system has efficient and convenient man-machine interface by using menu operation method. The testing and operation of actual production data in simulation system indicate that the system is exact and reliable and can provide both the warning of various furnace breakdown and corresponding operation guidance.     

Survey of the Product and Technology of Handhold Computer

The development circumstance about Handhold Computer technology and products at home and abroad are described in details, resumes the development of the technology and elaborates the difference between our country's technology and the advanced foreign technology. Besides, it also introduces the relationship of Windows CE and Handhold Computer.     

THE MIXED MODE FRACTURE CRITERION OF BRITTLE ROCK UNDER COMPRESSION-SHEAR STRESS STATE

In this paper the test results of mixed mode fracture of three kinds of brittle rock under two kinds of stress paths are reported. The fracture mechanism and failure patterns of brittle lock under different stress paths are discussed. Theory analysis and test results show that the Compression- Shear fracture criterion of brittle rock can be expressed:     

论农学研究的发展

较为详细地论述了中国传统农学和西方近代农学的哲学基础、方法论及它们各自的不足。中国传统农学思想的阐释借鉴了中国古代哲学的概念和范畴，以朴素的系统、整体观察为特征。西方近代农学则以还原论为基础，以实验、分析方法为特征。系统科学是20世纪兴起的联系社会科学与自然科学的一门横断性学科，是探索整体、演化及其复杂性的科学。现代农学研究应引入系统科学的哲理观和方法论，对于融合中国传统农学与西方近代农学、发展现代农学有重要意义。     

Experimental Study on the Extended Length of Negative Reinforcement Cut-in Phases in Continuous Beams

In this paper through the static loading tests of 6 inflexion zones and 2 cantilever zones in full-size constrained R/C beams, the stress performance in rebars cut-in-phases and subjected to negative moment is studied. The stress properties of extended length of rebars with different shear-span ratiosare analysed on basis of the full measurement of strain distributions combined with the investigation on state and regularity of the diagonal cracks development and series of new knowledge are obtained. It is found that current Concrete Design Code provisions on the extended length are inadequate for the high shear-span ratio and superfluous for the low shear-span ratio. The theoretical and experimental foundations are provided for determining proper value of extended length for rebars cut-in-phases.