Farm salinity appraisal with water reuse

The need for a better understanding of the interaction between irrigation practices and the elevation and quality of the water table is of paramount importance for developing irrigation management strategies to ameliorate the regional problems of elevated saline water tables in the San Joaquin Valley, California. An area of approximately 3000 ha which includes portions of the Diener Ranch and the adjacent University of California, Westside Research and Extension Center, located south of Five Points in the Westlands Water District on the west side of the San Joaquin Valley was chosen for extensive field measurements. Field work consisted of four main activities namely, field instrumentation, collection of records of field activities, periodic data collection, and analyses of field data. Field measurements of water table carried out during 1994 indicated that the water table elevation was sensitive to the irrigation practices. There was a general increase in the area with a water table close to the surface during the irrigation season, and a return to water table elevations similar to the starting conditions at the end of the season. During the study period, the surface water quality deteriorated more in areas irrigated with reuse water and persisted through the end of the season. Depth averaged electrical conductivity for the study area over 6.5 m decreased between December 1993 and December 1994. Vertical hydraulic gradients in the saturated zone, were found to be an order of magnitude larger than horizontal gradients. The direction of vertical gradients changed, with downward gradients following pre-irrigations and upward gradients later in the season, when crop water requirements increased. Based on the results of the field study, it can be concluded that the irrigation management practices have a direct effect on local water table response as well as on water quality. Therefore, irrigation practices that promote less deep percolation losses may be helpful in controlling the water table rise.     

Potato water use and yield under furrow irrigation

Field experiments were conducted to study the effects of plant-furrow treatments and levels of irrigation on potato (Solanum tuberosum L.) water use, yield, and water-use efficiency. The experiments were carried out under deficit irrigation conditions in a sandy loam soil of eastern India in the winter seasons of 1991/92, 1992/93, and 1993/94. Two plant-furrow treatments and two levels of irrigation were considered. The two plant-furrow treatments were F₁ - furrows with single row of planting in each ridge with 45 cm distance between adjacent ridges, and F₂ - furrows with double rows of planting spaced 30 cm apart in each ridge with 60 cm distance between adjacent ridges. The two levels of irrigation (LOI) were I₁ - 0.9 IW/CPE and I₂ - 1.2 IW/CPE, where IW is irrigation water of 5 cm and CPE is cumulative pan evaporation. Treatment F₂ produced highest tuber yield in all years with average value of 10,610 kg ha ^-1 and 12,780 kg ha ^-1 at LOI of I₁ and I₂, respectively. On average, six irrigations with a total of 25 cm, and seven irrigations with a total of 30 cm were required for both treatments F₁ and F₂ at LOI of I₁ and I₂, respectively. Treatment F₂ resulted in a significantly higher number of branches and tubers per plant, foliage coverage and water-use efficiency for both irrigation levels than treatment F₁. Average daily crop evapotranspiration was found to range from 1.1 to 3.4 mm and from 1.2 to 3.9 mm for treatment F₁ and from 1.1 to 3.6 mm and from 1.2 to 4.0 mm for treatment F₂ at LOI of I₁ and I₂, respectively.     

An integrated modelling toolbox for water resources assessment and management in highland catchments: Model description

Water and land resource competition and environmental degradation pose difficult questions for resource managers. In particular, the ensuing trade-offs between economic, environmental, and social factors and their spatiotemporal variability must be considered when implementing management policies. This paper describes an integrated modelling toolbox that has been developed for highland catchments – specifically the Mae Chaem catchment in Northern Thailand. This toolbox contains models of crop growth, erosion and rainfall-runoff, as well as household decision and socioeconomic impact models. The approach described advances and complements previous approaches by: considering more complex interactions between land-use decisions and the hydrological cycle; modelling household decisions based on uncertain expectations; and assessing impacts of changes not only on flows and household income, but also on subsistence production and erosion. An example of the types of trade-offs and scenarios that can be assessed using the integrated modelling toolbox is also presented. This demonstrates that for the scenarios presented, the magnitude and direction of impacts simulated by the model is not dependent on climate. Further testing of the model is demonstrated in a companion paper. Overall, the plausibility of the model is shown.     

Irrigation of seed carrots on a sandy loam soil

Summary Little research has been reported which quantifies the response of a carrot (Daucus carrota L. var sativa DC.) seed crop to water management. While the area of seed production of this crop in the United States is less than 3000ha, the return ranges from US $2000 to $ 10 000 ha^–1. Because of the need to mature and dry the seed on the plant, carrot seed is generally grown in areas with negligible summer rain and thus depends on irrigation to supply the crop water requirement. A study was conducted to determine the effect of irrigation water management on seed production and crop water use of carrots grown by the root-to-seed method. Two carrot types (Nantes and Imperator) were evaluated in 9 irrigation treatments over a three year study period. Irrigation treatments which replaced a percentage of the calculated crop evapotranspiration on either a daily basis or when a soil water depletion reached 30 mm were used. A trickle irrigation system with the laterals placed on the carrot bed was used to apply a uniform and accurate amount of water. There was a marked difference in the crop response to the water management of the two carrot types used. The Nantes type exhibited a positive response to moderate water deficits in terms of improved pure live seed (PLS) yield while the Imperator achieved its maximum yield when it was not stressed. Higher irrigation applications in the Nantes type resulted in reduced yields while the Imperator was not affected after its non-stress water requirement was met. Soil water data indicated that the most active zone of extraction of water was to a depth of 1.5 m in the soil profile. As the depth of applied water approached the crop water requirement, the depth of extraction was reduced. Increasing the frequency of irrigation also tended to reduce the depth of extraction of soil water. A total crop water use of approximately 550 to 620 mm was needed to achieve the best PLS yield which is roughly equal to potential evapotranspiration in the San Joaquin Valley, during the time that the crop water use was calculated. In such a climate, the irrigation interval should not exceed 3 to 5 days depending on the time of year.     

Roots in irrigated clay soils: Measurement techniques and responses to rootzone conditions

Summary This paper reviews research carried out at the Griffith Laboratory in Australia over the last decade on techniques for, and results of, observations of roots in irrigated clay soils. Our results emphasise the adaptability of root systems to rootzone conditions. Experiences with techniques for observing roots non-destructively in the field and both non-destructively and destructively in lysimeters are described. We concluded that the minirhizotron technique, applied in the field, was unreliable under our conditions. Horizontal root observation tubes were used in lysimeters to measure root length density (RLD) and to assess whether roots were clumped together or randomly distributed. Destructive sampling and measurement of RLD was used to establish a theoretical relationship between root intercept counts along the tubes and RLD. The application of image analysis to both destructive and non-destructive sampling in the lysimeters is outlined. The non-destructive lysimeter studies showed that roots were significantly clumped. Analysis of root intercept and root hole counts on the faces of sample cubes taken from the lysimeters showed root distribution was anisotropic over the whole soil profile for both safflower and wheat. There were many more roots and root holes present in the sampled soil cubes than was indicated by independent sampling for washed out RLD. Safflower appeared to have a faster turnover of roots than did wheat or maize. Lysimeters, equipped with horizontal root observation tubes, enabled studies to be made of many factors affecting root growth. Soils affect where and how fast roots grow, although there is also a strong species interaction. For example, soybean roots proliferated above a fresh water table in one soil but not in another; wheat had little tendency to proliferate above the water table in either soil. In wet soils, roots cease to grow once soil oxygen levels decrease below 10 mg O₂ l _soil ^-1 . This level should form the basis for soil drainage criteria. In drying soils, roots will grow successively into soil regions containing soil water: the level of adaptation being determined by soil conditions, crop growth stage and level of evaporative demand. The methods of root observation used in our studies have given quantitative assessment of root distribution. However, further research is needed to link horizontal and vertical root distribution and root adaptation more strongly to crop development and soil conditions.     

Effects of soil type on soybean crop water use in weighing lysimeters

Summary Different soils are known to affect the amount and distribution of both available water and roots. Optimising irrigation water use, especially when shallow water-tables are present requires accurate knowledge of the root zone dynamics. This study was conducted to determine the effect of two soil types on root growth, soil water extraction patterns, and contributions of a water-table to crop evaporation (E). Two weighing lysimeters (L1 and L2) with undisturbed blocks of soil were used. The soil in L1 had higher hydraulic conductivity and lower bulk density than that in L2. Well watered conditions were maintained by irrigation for the first 110 days from sowing (DFS). Root length density (RLD) was calculated from observations made in clear acrylic tubes installed into the sides of the lysimeters. Volumetric soil water contents were measured with a neutron probe. A water-table (EC = 0.01 S m^-1) was established 1 m below the soil surface 18 DFS. RLD values were greater in L1 than L2 at any depth. In L1, maximum RLD values (3 × 10⁴ m m^-3) were measured immediately above the water-table at physiological maturity (133 DFS). In L2, maximum RLD values (1.5 × 10⁴ m m^-3) were measured at 0.42 m on 120 DFS and few roots were present above the water-table. From 71 to 74 DFS, 55 and 64% of E was extracted from above 0.2 m for L1 and L2, respectively. In L2, extraction was essentially limited to the upper 0.4 m, while L1 extraction was to 0.8 m depth. Around 100 DFS the water-table contributed 29% (L1) and 7% (L2) of the water evaporated. This proportion increased rapidly as the upper soil layers dried following the last substantial irrigation 106 DFS. Over the whole season the water-table contributed 24% in L1 and 6.5% in L2 of total E.     

Determining transpiration from meteorological data and crop characteristics for irrigation management

Summary Traditional meteorological estimates of evapotranspiration include empirical crop factors which are inadequate for scheduling high frequency irrigation. The performance of a transpiration model was tested and adapted to suit the operational requirements of automated irrigation systems. Hourly measurements of global solar radiation, air temperature, humidity and wind speed, obtained from an automatic weather station are inputs to the model. Additional inputs include daily updated data of plant height and leaf area index. This information is processed to determine the active coupling surface between the crop and the atmosphere. The model takes into account the resistance of the leaf to diffusion of water vapor.Calculated transpiration, based on the model, matched very closely measurements of latent heat flux in an irrigated cotton field. It was also in good agreement with water uptake measured in stems of the cotton plants using a heat pulse technique. The test also showed that implementation of the model in the field under study would have improved the efficiency of water application.Contribution from the Agricultural Research Organization, The Volcani Center, Bet Dagan, Israel, No. 1855-E, 1986 series     

Contrasting edge and pasture matrix effects on ant diversity from fragmented landscapes across multiple spatial scales

Landscape Ecology - Harmful effects of habitat loss and fragmentation can be detected across multiple spatial scales, yet most studies that aim to characterize these effects take place at a single...     

The effect of breed,sex, and oral meloxicam administration on pain biomarkers following hot-iron branding in Hereford and Angus calves

Hot-iron branding uses thermal injury to permanently identify cattle causing painful tissue damage. The primary objective was to examine the physiological and behavioral effects of oral meloxicam (MEL), compared to a control, administered at the time of hot-iron branding in Angus and Hereford steers and heifers. The secondary objectives were to investigate breed and sex effects on pain biomarkers. A total of 70 yearlings, consisting of 35 heifers and 35 steers (Angus, Hereford, or Angus × Hereford), were enrolled in the study. Animals were blocked by sex, randomized across weight, and assigned to receive MEL (1 mg/kg) or a placebo (CON). Biomarkers were assessed for 48 h after branding and included infrared thermography (IRT), mechanical nociceptive threshold (MNT), accelerometry and a visual analog scale (VAS), and serum cortisol and prostaglandin E₂ metabolites (PGEM). Wound healing was assessed for 12 wk. Hair samples to quantify cortisol levels were taken prior to and 30 d post-branding. Responses were analyzed using repeated measures with calf nested in treatment as a random effect, and treatment, time, treatment by time interaction, breed, and sex as fixed effects. There was a treatment by time interaction for PGEM (P < 0.01) with MEL having lower values than CON at 6, 24, and 48 h (MEL: 18.34 ± 3.52, 19.61 ± 3.48, and 22.24 ± 3.48 pg/mL, respectively; CON: 32.57 ± 3.58, 37.00 ± 3.52, and 33.07 ± 3.48 pg/mL; P < 0.01). MEL showed less of a difference in maximum IRT values between the branded (2.27 ± 0.29 °C) and control site (3.15 ± 0.29 °C; P < 0.01). MEL took fewer lying bouts at 0–12 h (4.91 bouts ± 0.56) compared with CON (6.87 bouts ± 0.55; P < 0.01). Compared with Hereford calves, Angus calves exhibited greater serum but lower hair cortisol, greater PGEM, more lying bouts, and less healed wound scores at 3, 4, and 5 wk. Compared with heifers, steers exhibited lower PGEM, lower branding site and ocular IRT, higher MNT, and lower plasma meloxicam levels. Steers spent more time lying, took more lying bouts and had greater VAS pain, and more healed wound scores at 5 wk than heifers. Meloxicam administration at branding reduced branding and control site temperature differences and reduced lying bouts for the first 12 h. Breed and sex effects were observed across many biomarkers. Changes from baseline values for IRT, MNT, lying time, step count, VAS pain, and wound scoring all support that branding cattle is painful.     

TILLING and Ecotilling the Plant Kingdom

The modem crop scientist has a large amount of available nucleotide sequence information to identify genes of potential agronomic importance. Using reverse genetic approaches, specific genes can be disrupted, and hypotheses regarding gene function directly tested in vivo. Although a number of reverse genetic methods have been introduced, many are limited in application because they are organism-specific, expensive, transgenic, or only transiently disrupt gene function. However, traditional mutagenesis using chemical mutagens has been widely used as a forward genetics strategy to create many new crop plant varieties at relatively low cost. Mutagens such as ethyl methanesulphonate （EMS） cause stable point mutations and thus produce an allelic series of truncation and missense changes that can provide a range of phenotypes （Greene et al., 2003）. TILLING （targeting induced local lesions IN genomes） is a high-throughput reverse genetic strategy that combines traditional mutagenesis and SNP discovery methods （Colbert et al., 2001; McCallum et al., 2000）. To identify mutations, target regions of-l.5 kb are amplified with fluorescently labeled gene specific primers. Heteroduplexes are then formed between wild-type and mutant strands, mismatches are cleaved by incubation with a single-strand specific nuclease,