青海东部农区引进燕麦品种各器官C、N、P生态化学计量学特征变化研究

以4个引种燕麦(Avena sativa)为典型代表,对其不同生育时期根、茎、叶中的C、N、P含量及其化学计量学特征进行测定,探讨不同生育时期燕麦C、N、P元素含量及其化学计量比的变化规律,为燕麦饲草的科学收获提供理论依据。结果表明：燕麦全株C、N、P含量分别为322.30～333.97、17.42～75.62、2.74～5.42 mg·g^-1,燕麦根C、N、P含量分别为298.42～317.92、11.47～73.71、2.82～3.42 mg·g^-1,燕麦茎C、N、P含量分别为311.25～338.86、10.15～75.16、2.44～5.06 mg·g^-1,燕麦叶C、N、P含量分别为330.80～372.47、30.64～113.80、2.59～8.65 mg·g^-1;各器官间C、N、P含量表现为叶>茎>根。此外,燕麦各器官C、N、P含量的积累过程具有一定季节特征,C含量积累过程受生育时期影响较小,表现出较强的稳定性;而N和P含量的积累过程受生育时期影响较大,其在拔节期～抽穗期均...     

青贮玉米蠕形菌的分离鉴定及其致病性分析

本研究为初步明确引起青贮玉米(Zea Mays L.)叶斑病的蠕形菌种类,采集疑似病斑叶片样本,对病原菌进行分离纯化,形态特征观察,ITS-rDNA序列和GADPH基因序列系统发育分析及致病性测定。形态学和分子生物学鉴定结果表明分离得到的142株病原菌为3属6种真菌,其中麦根腐平脐蠕孢(Bipolaris sorokiniana)和玉米生平脐蠕孢(B.zeicola)为优势病原菌,分别为77株和48株;其次为大斑病菌(Exserohilum turcicum)9株,疣状弯孢(Curvularia verruculosa)2株,新月弯孢(C.lunata)3株,穗状弯孢(C.spicifera)3株。致病性测定发现麦根腐平脐蠕孢和玉米生平脐蠕孢对青海省8个主栽青贮玉米品种均有致病性,其余4种病原菌的致病性各有差异。本研究初步明确引起青贮玉米叶斑病的蠕形菌种类及其致病性,为后续开展病害诊断及其综合防控奠定了基础。     

低磷胁迫对红豆草光合、叶绿素荧光及内源激素的影响

为探究低磷胁迫对红豆草(Onobrychis viciaefolia)光合作用、叶绿素荧光以及内源激素的影响,本试验采用营养液沙培法,以耐低磷5号和磷敏感1号红豆草为试验材料,设置常磷(1.00 mmol·L^-1 KH₂PO₄)和低磷(0.01 mmol·L^-1 KH₂PO₄)胁迫处理,于不同胁迫天数后测定形态、光合以及内源激素含量变化。结果表明：低磷胁迫抑制红豆草生长和光合作用,在低磷胁迫下,除非光化学淬灭系数外,供试红豆草叶绿素荧光参数均下降。随着胁迫时间的延长,2份红豆草材料地上和地下部玉米素(ZT)、脱落酸(ABA)、生长素(IAA)和赤霉素(GA₃)及其之间的比值变化趋势不一致,耐低磷红豆草地上和地下部ZT,GA₃,IAA,ABA耐低磷系数大于磷敏感材料。相关性分析表明,IAA与光合作用和叶绿素荧光显著相关,ABA与IAA,ZT,GA₃呈负相关。研究结果可为红豆草耐低磷特性研究提供...     

基于ISSR分子标记的紫云英种质资源遗传多样性及结构分析

紫云英(Astragalus sinicus L.)是我国重要的稻田绿肥作物,为揭示不同地区种质资源遗传特征,本研究利用ISSR分子标记对77份紫云英种质资源进行了遗传多样性及结构分析。研究发现,77份供试紫云英种质资源遗传相似性系数为0.567 7～0.868 6,可划分为6个聚类。不同地区群体间分化系数为0.136 3,达到极显著水平(P<0.001),其中种群间变异占比13.9%,种群内变异占比86.1%。不同ISSR引物扩增信息鉴别紫云英资源的能力存在差异,构建了以P809第3,8,9,10,12,15扩增位点以及P886第1,3,5,9,10,11扩增位点为特征的指纹图谱,能有效区分77份供试紫云英资源。以资源所在省份为单元进行群体分析,供试紫云英资源遗传结构呈现分化特征,河南-安徽-江苏-上海资源遗传结构相似,构成北方亚群;四川-广西-湖南-江西资源相似,构成西南方亚群;福建种质资源则呈现混合型特征。本研究结果可为我国紫云英种质资源的科学利用及新品种选育提供依据。     

建立沙化土地封禁保护区对农户生计多样化的影响

【目的】精确识别建立沙化土地封禁保护区对甘肃省不同生态系统下农户生计多样化的影响。【方法】在玛曲、民勤和山丹的国家级沙化土地封禁保护区(项目组)和未封禁区(对照组)进行调查问卷和访谈,研究沙化土地封禁保护政策的影响下生计策略与生计资本的关系。【结果】生计资本总值和生计策略总指数均呈现牧区＜农区＜农牧交错区的特征,且项目组低于对照组;生计多样化指数为 0 及 0. 5 以上的农户数项目组相比对照组下降幅度大,0~0. 5 的农户数项目组相比对照组上升幅度大。 【结论】建立封禁保护区在降低三县封禁区农户的生计资本的同时,也降低了纯农户的比例,但总体上生计多样化水平较低;自然资本是主导农户选择农业生产生活的主要因素,人力资本是主导农户选择非农业生产生活的主要因素。     

System of Scanning Tunneling Microscope

Some ideas are given about using out-clock, CPU and anti-T-net of D/A card for getting to the intelligent control of scanning voltage ,low-filter and hign-filter of STM; logarithm amplifier for tunnelling current contraction. At last, some applications and questions when it running about STM are discussed.     

Distributed Power Flow Method Based on Ward Equivalent

With interconnecting and developing of power system, the problem of power flow computation on dispersed data resource need to be solved. A new distributed computation method of power flow based on Ward equivalent is presented. According to master-slaver splitting principle, multi-area interconnected power system is divided into master-slaver areas. Boundary buses in different areas are defined as different bus-types. Neighborhood areas are equivalent by Ward equivalent principle, and the equivalent injection power and equivalent impedance are worked out. Power flows from master area to slaver areas are solved by Newton method, and the equivalent injection power and equivalent impedance on the boundary are modified by their solutions. The process above repeats until to convergence. The proposed distributed power flow method takes full advantage of the information of power, voltage, network configuration in neighborhood areas, so it is better on convergence and quality of solution. The proposed algorithm is testified by IEEE 14-bus system and a practical 181-bus system.     

Two Types Modules for the Boiler Attached to 330 MW Unit

Boiler is an important facility in power plant , the safety and economy of unit is affected by it. Studying the dynamic of boiler can improve the knowledge about boiler , which is important for. Features of MMS are introduced based on MMS simulation setting, and the real time capable module and non real time capable module are compared from principle. Real time capable dynamic model of boiler and non real time capable dynamic model of boiler of 330 MW unit are established . The experimental results show that the dynamic process of two type model accords with the mechanism of the object , at the same time, the validity of real time capable module is discussed .     

Simulation for Logistics in Steel-making Process of Panzhihua Iron and Steel Corporation

To solve potential scheduling problems in production after renewal of continuous casting process in Vanadium-extracting and Steel-making Plant of Panzhihua Iron and Steel Corporation (PISCO), how to model and simulate logistics system in steel-making processhas been discussed. A series of simulatingtests for logistics system in steel-making processhave been conducted based on inputs of presentsteel-making processof PISCO. In the tests, cases of regular schedule case and cases with repairing converter have also been regarded as essential simulation condition. It has been shown that three casters can not start at same time in order to ensure continuous hot metal supply for casters when three kinds of steel are made. It has also been shown that the simulation system for logistics system in steel-making processis valid and can be used for simulating logisticsin upcoming 100% continuous casting process of PISCO. The better schedule scheme of production and reasonable match of converter-caster in time and capacity can be achieved with the help of using simulation approach.     

不同熔化速率下的电渣重熔过程数值模拟分析

电渣重熔能提高钢锭的质量,从而满足特种行业的需要,其过程伴随着复杂的物理现象,存在着磁流体流动、传热和传质以及电化学等多方面的影响。通过耦合电磁以及流动和温度方程对电渣重熔过程的三维瞬态进行了数学模拟,研究了熔化速率对重熔过程的影响。结果表明：电流密度、焦耳热和电磁力都随着熔化速率的增大而增大,当熔化速率由14.4 kg/h增加到27.0kg/h,电流密度、焦耳热和电磁力最大值的增大比例超过100%。随着熔化速率的增大,温度最大值有小幅的增加,而且速度最大值的增大幅度接近50%;金属熔池深度则由27 mm增大到38 mm,不利于保证铸坯的质量。