商洛市平菇栽培及病虫害防治关键技术

商洛市作为我国平菇栽培的重要产区之一,拥有超过50年的平菇人工栽培历史,商洛地区平菇产业不仅在农业经济方面取得显著成就,而且深受市场和消费者喜爱。本文系统总结了近年来商洛市平菇的栽培技术及病虫害防治策略。详细介绍了商洛市平菇目前主推的栽培的季节及品种选择、栽培配方、制袋、养菌管理、出菇管理、采收等内容,分析了平菇的常见病虫害,并提出了相应的防治措施。这项研究为商洛地区平菇产业的发展壮大提供了技术支持。     

真菌对东北白桦木材化学成分的影响

为分析真菌对东北白桦木材化学成分的影响,有效的防治白桦木材变色,本研究对2种变色真菌引起的变色白桦木材A、B、C的化学成分进行了分析,结果表明,变色木材中的木素、a-纤维素含量基本未变,半纤维素含量降低。而聚戊糖由16.83%,分别降低到15.31%、15.31%及15.51%,通过冷热水、1%氢氧化钠、苯醇抽提物分析可见,4种抽提物含量增加明显,表明低分子化合物及糖类、可溶性无机盐等是变色真菌的营养源。对真菌间作用的分析结果表明,2种变色真菌间存在竞争关系,由此可以寻求防治变色的一条新途——生物防变色。     

杂草稻nrDNA ITS片段的PCR扩增条件优化及测定

对杂草稻的nrDNA ITS片段的PCR扩增条件进行了优化并测定,建立的PCR最优体系为：20μL反应体系含1μL模板DNA,0．125mmoL／L dNTPs,0．5μmol／L正反向引物,1U Taq酶,2．0μL 10×Taq PCR Bufter;退火温度为57℃。这样的条件下充分保证了ITS PCR产物的质量和纯度要求,直接测序结果为600bp左右,与网上结果十分类似,表明结果准确可靠。这些ITS片段的系统学信息将为杂草稻的起源进化提供有力的分子水平证据。     

Identification of a conservative site in the African swine fever virus p54 protein and its preliminary application in a serological assay

BackgroundASF was first reported in Kenya in 1910 in 1921. In China, ASF spread to 31 provinces including Henan and Jiangsu within six months after it was first reported on August 3, 2018. The epidemic almost affected the whole China, causing direct economic losses of tens of billions of yuan. Cause great loss to our pig industry. As ELISA is cheap and easy to operate, OIE regards it as the preferred serological method for ASF detection. P54 protein has good antigenicity and is an ideal antigen for detection.ObjectiveTo identify a conservative site in the African swine fever virus (ASFV) p54 protein and perform a Cloth-enzyme-linked immunosorbent assay (ELISA) for detecting the ASFV antibody in order to reduce risks posed by using the live virus in diagnostic assays.MethodWe used bioinformatics methods to predict the antigen epitope of the ASFV p54 protein in combination with the antigenic index and artificially synthesized the predicted antigen epitope peptides. Using ASFV-positive serum and specific monoclonal antibodies (mAbs), we performed indirect ELISA and blocking ELISA to verify the immunological properties of the predicted epitope polypeptide.ResultsThe results of our prediction revealed that the possible antigen epitope regions were A23–29, A36–45, A72–94, A114–120, A124–130, and A137–150. The indirect ELISA showed that the peptides A23–29, A36–45, A72–94, A114–120, and A137–150 have good antigenicity. Moreover, the A36–45 polypeptide can react specifically with the mAb secreted by hybridoma cells, and its binding site contains a minimum number of essential amino acids in the sequence 37DIQFINPY44.ConclusionsOur study confirmed a conservative antigenic site in the ASFV p54 protein and its amino acid sequence. A competitive ELISA method for detecting ASFV antibodies was established based on recombinant p54 and matching mAb. Moreover, testing the protein sequence alignment verified that the method can theoretically detect antibodies produced by pigs affected by nearly all ASFVs worldwide.     

Progress in roles of MNX1 antisense RNA 1 in malignant tumor

MNX1 antisense RNA 1 （MNX1-AS1） is a newly discovered long non-coding RNA （lncRNA）, which is highly dysregulated in various carcinomas and its expression level is closely related to the overall survival and prognosis of patients. MNX1-AS1 regulates the occurrence and development of carcinomas by endogenous competitive adsorption of miRNA, regulating cell cycle, inducing epithelial mesenchymal transformation and activating multiple signaling pathways. The in-depth study of the carcinogenesis of MNX1-AS1 is useful for the early diagnosis, targeted therapy and prognostic assessment of relevant carcinomas. This article reviews the roles of MNX1-AS1 in malignant tumor.     

稀燃汽油机瞬态空燃比的滑模-神经网络控制

提出了稀燃汽油机空燃比滑模-神经网络控制方案,采用滑模变结构控制对稀燃工况的空燃比进行反馈控制,采用神经网络实现对进气量的精确预测和油膜动态特性的前馈补偿,进而实现对稀燃发动机瞬态空燃比的精确控制。采用自行开发的电控系统,在一台稀燃发动机上进行了瞬态空燃比实验。实验结果表明:节气门急速变化时空燃比超调可以控制在1个空燃比单位以内,调整时间不超过3s;转速越低,节气门变化越剧烈;空燃比超调越大,调整时间越长。     

基于简化脉冲耦合神经网络的蝗虫图像二值分割

采用参数简化的脉冲耦合神经网络（PCNN）分割图像,进行了蝗虫图像分割实验,区域正确识别率达94％,为蝗虫自动侦测系统中的数据处理提供了技术支持。计算机仿真表明,采用PCNN图像分割算法,图像中的目标（蝗虫）易于发现,分割效果明显好于采用开操作处理的图像。     

半轴套管热挤压成形工艺数值模拟

通过对半轴套管的工艺分析,基于体积不变原则,采用逆向法计算零件毛坯,确定了热挤压成形工艺方案;结合刚粘塑性有限元法基本原理,运用有限元软件对半轴套管的反挤压过程进行3-D热力耦合模拟。影响半轴套管热挤压成形的主要工艺参数有挤压温度、挤压速度、模具预热温度等。在其他条件相同情况下,分别设置不同的挤压温度、挤压速度、模具预热温度,通过对不同参数模拟结果的分析比较,得出工艺参数对半轴套管成形的影响状况,揭示热挤压成形过程中的金属流动规律。优化的成形参数,提高了半轴套管的成形性能和经济性能。     

水稻谷粒的挤压力学性能研究

水稻谷粒的损伤与破碎除与其所受内、外力的作用有关,还与其本身的力学性能有关。通过对水稻谷粒的挤压力学试验,测得了其力-位移曲线,分析了水稻谷粒的挤压破碎过程。破坏力和破坏能是水稻谷粒力学特性的两个重要指标。试验研究了稻谷的品种、成熟程度、后熟作用和谷壳对水稻谷粒力学性能的影响。比较了有壳、无壳谷粒的破坏力与破坏能,分析了谷壳对谷粒力-位移曲线及刚度的影响。指出谷壳在降低谷粒收获、加工、储运中的损伤程度具有重要作用。