The carbon budget of an adult <Emphasis Type="Italic">Pinus cembra</Emphasis> tree at the alpine timberline in the Central Austrian Alps

We investigated carbon (C) uptake and respiratory losses of an adult Pinus cembra tree at the alpine timberline throughout an entire year by means of an automated, multiplexing gas exchange system. These chamber measurements were then combined with biomass data for scaling up the C budget to the tree level. Integrated over an entire year, the cumulative C gain of the tree under study was 23.5 kg of C in 2002. The daily C balance was negative for 5 months and the estimated total wintertime respiratory losses were 9% of the amount of C fixed during the growing season. The total annual C loss of the tree consumed 55% of the annual net C gain and the remaining surplus was stored in new tissues (36%) and used for fine root growth (9%). Thus, the overall C budget of P. cembra at the upper timberline is balanced fairly well, although the C sink strength in fine roots is strongly limited owing to low root zone temperatures when compared to conifers at lower elevation sites.     

Seasonal variation of soil respiration in a Pinus cembra forest at the upper timberline in the Central Austrian Alps

Soil respiration (R) of a 95-year-old Pinus cembra L. forest at the alpine timberline was measured continuously from October 2001 to January 2003 with an automated multiplexing gas exchange system. There was significant spatial variability in soil respiration, and R at a soil temperature of 10 degrees C (R10) decreased by about 20% m(-1) with increasing distance from the trunk. Needle litter and fine root density also decreased. The spatially averaged annual soil CO2 efflux was 35 g C m(-2) year(-1) in 2002. About 70% of the temporal variation in soil respiration could be explained by variations in soil temperature, whereas the influence of soil water potential and thus soil water content was negligible because soil water availability was supra-optimal.     

Development and application of functional markers in maize

Summary Functional markers (FMs) are derived from polymorphic sites within genes causally involved in phenotypic trait variation (Andersen, J.R. & T. Lübberstedt, 2003. Trends Plant Sci 8: 554–560). FM development requires allele sequences of functionally characterized genes from which polymorphic, functional motifs affecting plant phenotype can be identified. In maize and other species with low levels of linkage disequilibrium, association studies have the potential to identify sequence motifs, such as a few nucleotides or insertions/deletions, affecting trait expression. In one of the pioneering studies, nine sequence motifs in the dwarf8 gene of maize were shown to be associated with variation for flowering time (Thornsberry, J.M., M.M. Goodman, J. Doebley, S. Kresovich, D. Nielsen & E.S. Buckler, 2001. Nat Genet 28: 286–289). Proof of sequence motif function can be obtained by comparing isogenic genotypes differing in single sequence motifs. At current, the most appropriate approach for this purpose in crops is targeting induced local lesions in genomes (TILLING) (McCallum, C.M., L. Comai, E.A. Greene & S. Henikoff, 2000. Nat Biotechnol 18: 455–457). In central Europe, maize is mainly grown as forage crop, with forage quality as major trait, which can be determined as proportion of digestible neutral detergent fiber (DNDF). Brown midrib gene knock out mutations have been shown to be beneficial for forage quality but disadvantageous for overall agronomic performance. Two brown midrib genes (bm1 and bm3) have been shown to be involved in monolignol biosynthesis. These two and additional lignin biosynthesis genes have been isolated based on sequence homology. Additional candidate genes putatively affecting forage quality have been identified by expression profiling using, e.g., isogenic bm lines. Furthermore, we identified an association between a polymorphism at the COMT locus and DNDF in a collection of European elite inbred lines.     

Chromosomal location of genes for resistance to powdery mildew in common wheat (Triticum aestivum L. em Thell.). 9. Gene MlZec1 from the Triticum dicoccoides-derived wheat line Zecoi-1

The Triticum dicoccoides-derived wheat line Zecoi-1 provides effective protection against powdery mildew. F₃ segregation analysis of Chinese Spring × Zecoi-1 hybrids showed that resistance in line Zecoi-1 is controlled by a single dominant gene. Amplified fragment length polymorphism (AFLP) analysis of bulked segregants from F₃s showing the homozygous resistant and susceptible phenotypes identified eight markers, of which four were associated with the resistance allele in repulsion phase. Following the assignment of these four repulsion phase AFLP markers to wheat chromosome 2B with the aid of Chinese Spring nulli-tetrasomic lines, they were physically mapped in the terminal breakpoint interval 0.89 (2BL-6)–1.00 (telomere) of chromosome 2BL. Genetic and physical mapping of simple sequence repeat markers from the distal half of chromosome 2BL located the wild emmer-derived powdery mildew resistance gene distal of breakpoint 0.89 in deletion line 2BL-6. Based on disease response patterns, genomic origin and chromosomal location the resistance gene in Zecoi-1 is temporarily designated MlZec1.     

Quantitative trait loci mapping of forage agronomic traits in six mapping populations derived from European elite maize germplasm

Four agronomic traits were analysed including dry matter concentration (DMC) and dry matter yield (DMY) for stover, plant height (PHT) and days from planting to silking (DPS). We mapped quantitative trait loci (QTL) in three populations with doubled haploid lines (DHL), one RIL population and two testcross (TC) populations derived from crosses between two of the four populations mentioned above to elite tester lines, based on field phenotyping at multiple locations and years for each; 146–168 SSRs were used for genotyping of the four mapping populations. Significant high phenotypic and genotypic correlations were found for all traits at two locations, while DMC was negatively correlated with the other traits. A total of 42, 41, 54, and 45 QTL were identified for DMC, DMY, PHT, and DPS, respectively, with 9, 7, 12, and 7 major QTL for each trait. Most detected QTL displayed significant interactions with environment. Major QTL detected in more than two populations will contribute to marker‐assisted breeding and also to fine mapping candidate genes associated with maize agronomic traits.     

Breeding for organic agriculture: the example of winter wheat in Austria

Breeding for organic agriculture (BFOA) is a strategy for a commercial breeding company based on the exploitation of the frequently observed high correlation for many traits between conventional, low input (LI) and organic agriculture (ORG). Indirect selection under LI can be useful to roughly divide the germplasm into the genotypes better adapted to high input and those better adapted to LI or ORG conditions. BFOA is an evolving process, in which two methods are currently applied: early generations are either selected following the pedigree system under LI, or grown as bulk populations on ORG fields. In the latter case the system switches to LI after individual ear selection under ORG conditions. In both methods, the first replicated yield trial is grown parallel under ORG and LI. Subsequently, the genotypes are grouped into conventional or ORG advanced trial series. The BFOA strategy allows that the larger genetic variability of both the organic and conventional gene pool can be exploited in the selection for ORG. Hitherto, seven winter wheat varieties were released in Austria after exclusive organic VCU testing.     

Different reactions of central and marginal provenances of Fagus sylvatica to experimental drought

Climate extremes are expected to increase in frequency and magnitude as a consequence of global warming, threatening the functioning, services and goods of forest ecosystems. Across Europe, the ecologically and economically important tree species Fagus sylvatica is expected to suffer particularly under such conditions. The regional introduction of provenances from drier and warmer climates is one option to adapt beech forest ecosystems to these adverse effects of climate change. Marginal populations from the drought-prone southern and north-eastern edges of the species’ distribution come into focus in search of suitable candidates for Central European deciduous forests. Here, we test three marginal provenances (Spain, Bulgaria and Poland) and three provenances from the centre of the distribution range (Germany) for their response to drought in two different soil types (sand, loam) in a full factorial common garden experiment in Landau, Germany. Drought impacted all growth parameters negatively (leaf damage +22 % (percentage points), height ?40 % and diameter increment ?41 %), and the sandy substrate exacerbated this effect. However, provenances differed in their response to drought and soil type. Evidence for a local adaptation to summer drought was detected, especially in terms of mortality rates. The Bulgarian and Spanish provenance showed a stable performance under drought conditions (BG ?27 % in diameter increment; ES ?32 %), compared to the Polish (?48 %) or the most sensitive German provenances (?57 %), yet for Bulgaria on a low level of total increment. This may indicate a trade-off between drought tolerance and growth. Therefore, a sole focus on drought-resistant marginal provenances seems to not be conducive, as they might be less adapted to other climatic factors, e.g. frost, as well. However, intermixed with local Central European provenances, these may act as functional insurance in future drought-prone forest stands.     

From wine to pepper: rotundone, an obscure sesquiterpene, is a potent spicy aroma compound

An obscure sesquiterpene, rotundone, has been identified as a hitherto unrecognized important aroma impact compound with a strong spicy, peppercorn aroma. Excellent correlations were observed between the concentration of rotundone and the mean 'black pepper' aroma intensity rated by sensory panels for both grape and wine samples, indicating that rotundone is a major contributor to peppery characters in Shiraz grapes and wine (and to a lesser extent in wine of other varieties). Approximately 80% of a sensory panel were very sensitive to the aroma of rotundone (aroma detection threshold levels of 16 ng/L in red wine and 8 ng/L in water). Above these concentrations, these panelists described the spiked samples as more 'peppery' and 'spicy'. However, approximately 20% of panelists could not detect this compound at the highest concentration tested (4000 ng/L), even in water. Thus, the sensory experiences of two consumers enjoying the same glass of Shiraz wine might be very different. Rotundone was found in much higher amounts in other common herbs and spices, especially black and white peppercorns, where it was present at approximately 10000 times the level found in very 'peppery' wine. Rotundone is the first compound found in black or white peppercorns that has a distinctive peppery aroma. Rotundone has an odor activity value in pepper on the order of 50000-250000 and is, on this criterion, by far the most powerful aroma compound yet found in that most important spice.     

Aroma compound analysis of Eruca sativa (Brassicaceae) SPME headspace leaf samples using GC,GC-MS,and olfactometry

The aroma compounds of rocket salad (Eruca sativa) SPME headspace samples of fresh leaves were analyzed using GC, GC-MS, and olfactometry. More than 50 constituents of the Eruca headspace could be identified to be essential volatiles, responsible for the characteristic intense green; herbal; nutty and almond-like; Brassicaceae-like (direction of cabbage, broccoli, and mustard); and horseradish-like aroma of these salad leaves. As aroma impact compounds, especially isothiocyanates, and derivatives of butane, hexane, octane, and nonane were identified. 4-Methylthiobutyl isothiocyanate (14.2%), cis-3-hexen-1-ol (11.0%), cis-3-hexenyl butanoate (10.8%), 5-methylthiopentyl isothiocyanate (9.3%), cis-3-hexenyl 2-methylbutanoate (5.4%), and 5-methylthiopentanenitrile (5.0%) were found in concentrations higher than 5.0% (calculated as % peak area of GC analysis using a nonpolar column).     

Homogeneous shear stress field of wood in an Arcan shear test configuration measured by means of electronic speckle pattern interferometry: description of the test setup

Wood Science and Technology - Several studies have dealt with the problem of how to measure the shear modulus of small clear wood specimens, avoiding bias from normal compression, bending, tension...