Harmonic Analysis and Suppression of High-frequency Welding Devices

This paper analyzes the structure and line current waveform of 3-phase AC voltage regulation circuit. As an application of 3-phase AC voltage regulation circuit, a high-frequency welding device's simulation model and harmonic analysis of line current are presented. Results of simulation are compared to field measurements. The two are in a good agreement, so this simulation model is correct. Two single-tuning filters and one second-order HPF are designed according to the device's harmonic condition. Simulation results of the circuit with filters indicate decrease of the harmonics in current of power supply, and the waveform is close to sinusoidal wave, which prove correctness of the solution to harmonics pollution.     

Nonlinearity of Electronic Throttle and Its Control

This paper introduces the development of the electronic throttle control system (ETCS) , the structure and the principle of the system are also involved. After analyzing the nonlinearity problem existing in the mechanical structure of the system, a mathematical model of the ETCS is built up. Then three controllers (PID controller, Fuzzy controller, sliding mode controller) were designed and simulated in the matlab simulink. The result indicates that the PID controller has an overshoot,but the Fuzzy controller and the sliding mode controller can settle the nonlinearity problem better.     

Research on a Novel Inverter of VSC

In order to improve waveform performance of light HVDC system, a lot of switches which operate in high frequency are used, which causes large switching losses and results high cost. A new Buck type voltage source converter(BVSC) is proposed. The new BVSC comprises a dual-buck converter and a three-phase inverter operating in grid frequency. Only two high frequency switches are used, which results good output waveform performance. In order to reduce the high frequency switching losses, a novel improved double-frequency Buck type voltage source converter(DBVSC) is also proposed. An additional dual-Buck converter is added to the BVSC, the added dual-Buck converter deals with the fundamental power that operates in low frequency, and BVSC only deals with harmonic power that operates in high frequency. The output waveform is enhanced and the switching losses are reduced in DBVSC, and the power rating is also increased. The DBVSC is very suitable for large power rating application. The one cycle control theory is adopted to control the proposed DBVSC with analog circuit, which is very simple. The proposed DBVSC and control method are verified by simulation.     

Exploration of Implementation Strategieson Housing Building Technology

Due to the sharp contradiction between rapidly developing housing construction in small-size town and quite low technological level, in this paper, the significance of setting up integrally technological system is emphasized and the suggestion that the technology should be integrated with the sustainable development, regional context and industrialization is put forward.     

Synthetic Assessment of Power Transformer Condition Based on Matter-element Theory

Condition assessment on power transformer is an important approach to improve reliability of transformer and provide proper decision-making for condition-based maintenance. For long, static assessment method used in the past has already not adapted to the development of modem electricity transmission and distribution technology. So based on the deficiency of fuzzy synthetic assessment method, matter-element synthetic assessment method is introduced. The method can evaluate transformer condition not only in quality but also in quantity. Because each index weight can be given fairly and fast through improved analytic hierarchy process, which need not carry on consistency chec accuracy of assessment can be improved. Examples analysis has proved that assessment method of power transformer condition based on matter-element theory is rational and effective.     

Detecting System of the Dielectric Loss in Capacitive Equipment Based on Virtual Instruments

A digital detecting system of the dielectric loss in the capacitive equipment is introduced based on virtual instruments.This system can real-time collect,analyze,process and storage electrical signals with National Instruments' program LabVIEW and ADLINK,s DAQ board.Through the simulation test in lab and the real test in electric substation,it is shown that this system has high accuracy on testing the dielectric loss in the capacitive equipment,the real test data is stable and the relative error of real dielectric loss is less than 5%.It is to say that this system can meet the requirement of the real on-line monitoring.     

铁矿粉烧结液相流动性能的特征数方程的建立

为解决在研究铁矿粉烧结液相流动性能时通常只考虑面积增长率这一终点信息,而没有考虑过程信息的缺陷以及采用多个指标来表征流动性能在使用上的不便,对影响流动性的因素进行了分析,结合量纲分析和白金汉定理推导出了能定量表征流动性强弱的流动性特征数(LD),简化特征数方程后得到等效流动性特征数(Ld Θ)。试验采用了可视卧式高温炉,记录了铁矿粉烧结液相流动的整个过程信息,通过基础实验和对照实验确定液相流动的起点和终点之后,可以得到每一种矿粉相应的等效流动性特征数数值。测量5种铁矿粉在两种方法下的流动性指标,当只考虑面积增长率时的流动性强弱顺序为A>C≈D>B>E,新方法下为Ld ΘA>Ld ΘD>Ld ΘC≈Ld ΘE>Ld ΘB,两种方法下的指标相近,但是综合了各种重要信息的新指标能进一步区分出各个因素对流动性能的影响程度。     

CO2-O2混合喷吹对铁液中C、V元素氧化的影响

为了验证用CO2替代部分O2进行转炉氧化提钒的可行性,在实验室进行了CO2-O2混合喷吹提钒模拟实验。结果显示C的氧化量与C的氧化速率随CO2含量的增加而升高;V的氧化量随CO2含量的增加而降低,其中CO2含量为20%与纯O2对C、V的氧化量接近;纯O2喷吹时C的氧化量为34.56%,V的氧化量为96.85%;CO2含量为20%混合气体喷吹时C的氧化量为36.83%,V的氧化量为93.29%;以V的相对氧化量与C的相对氧化量的比值(ΔV/ΔC)来衡量提钒保碳能力,CO2含量为20%的最终ΔV/ΔC为5.96,CO2含量,40%、60%、80%的最终ΔV/ΔC均小于3.8;反应前期,V的氧化速率随CO2含量的增加而升高,反应后期V的氧化速率随CO2含量的增加而降低。     

江淮稻区不同穗型粳稻品种主要农艺和品质特性的比较分析

依据着粒密度，对江淮稻区大面积生产应用的和新近育成的36个粳稻品种(系)进行聚类分析。结果表明，供试品种可分成半密穗型(Ⅰ)、偏密穗型(Ⅱ)和密穗型（Ⅲ）三类。随着水稻品种由散穗型向半密穗型、偏密穗型和密穗型的演变，产量性状、品质性状、形态性状和部分生理、生化性状发生了明显的变化，产量、每穗总粒数和实粒数显著增加，而穗数/m²、千粒重和结实率呈下降趋势；株高增加，上部三张叶片变长、变宽，生物日产量增高；穗部一、二次枝梗数增多，着粒密度变大；抽穗期和成熟期叶片、茎秆的含氮量和叶片叶绿素含量增高；糙米率和整精米率下降、垩白粒率降低、胶稠度变硬、蛋白质含量呈上升的趋势。