Using genetic tools to inform conservation of fragmented populations of Asian elephants (Elephas maximus) across their range in China

A herd of 15 Chinese elephants attracted international attention during their 2021 northward trek, motivating the government to propose establishment of an Asian elephant national park. However, planning is hampered by a lack of genetic information on the remaining populations in China. We collected DNA from 497 dung samples from all 5 populations encompassing the entire range of elephants in China and used mitochondrial and microsatellite markers to investigate their genetic and demographic structure. We identified 237 unique genotypes (153 females, 84 males), representing 81% of the known population. However, the effective population size was small (28, range 25–32). Historic demographic contraction appeared to account for low haplotype diversity (H_d = 0.235), but moderate nucleotide and nuclear diversity (π = 0.6%, H_e = 0.55) was attributable to post-bottleneck recovery involving recent population expansion plus historical gene exchange with elephants in Myanmar, Lao PDR, and Vietnam. The 5 populations fell into 3 clusters, with Nangunhe elephants differing consistently from the other 4 populations (F_ST = 0.23); elephants from Mengyang, Simao, and Jiangcheng belonged to a single population (henceforth, MSJ), and differed from the Shangyong population (F_ST = 0.11). Interpopulation genetic variation reflected isolation by distance and female-biased dispersal. Chinese elephants should be managed as 2 distinct units: Nangunhe and another combining Shangyong and MSJ; their long-term viability will require restoring gene flow between Shangyong and MSJ, and between elephants in China and neighboring countries. Our results have the potential to inform conservation planning for an iconic megafaunal species.     

曲拉通和硝酸混合溶液直接提取快速测定草鱼中铅含量

为建立快速测定草鱼中铅含量的方法,通过分析曲拉通和硝酸混合溶液浓度、提取时间、称样定容体积比例等因素的影响,以及基体改进剂的使用效果,确定了草鱼中铅元素提取测定的最佳条件。验证结果显示：采用曲拉通和硝酸混合溶液提取草鱼中铅元素方法的提取率为86.5%～95.6%,加标回收率为91.5%～95.6%,精密度均小于4.0%,检出限和定量限分别为0.011和0.032 mg/kg,满足了国家标准GB 5009.12—2017第一法石墨炉原子吸收光谱法的要求。与国家标准方法比较,本研究建立方法的样品前处理时间从4～12 h缩短至0.2 h内,酸试剂用量从湿法消解的7～12 mL减少至1～2 mL;前处理过程无需高温消解,无需其他前处理设备,避免了样品污染和待测元素损失,实现了降低分析成本以及保护环境和试验人员的目的。结果表明,该方法是一种简单、准确、绿色、快速测定草鱼中铅含量的方法,尤其适合大量样品检测。     

GA3和PP333对萝卜生长及产量的影响

通过研究不同浓度的GA3和PP333及两激素不同浓度的互作对萝卜叶面积、叶重量、叶子叶绿素含量及根冠比的影响。结果表明，两者对叶子叶绿素含量没明显影响，但GA3在促进叶子的生长，叶面积的增大上以10~30ppm效果最好，而PP333虽然能抑制叶子的生长，但在肉质根生长中后期试用50ppm浓度的PP333，抑制了叶子的生长，反而促进了光合产物输送到肉质根，起到增产的作用。适当浓度的GA3和PP333及两者结合增产效果明显     

新城疫病毒La Sota株HN基因的克隆与序列分析

旨在从分子生物学角度进一步研究新城疫病毒La Sota株HN基因,探究NDV La Sota HN基因的遗传变异情况。研究以试验室冻存的p NDV-HN为模版,根据Gen Bank中登录的NDV La Sota株序列设计引物扩增HN基因,将其克隆到pMD18-T载体后进行鉴定,对鉴定正确的重组质粒p MD-NDV-HN进行测序分析。应用生物信息学软件对新城疫病毒Lasota株HN基因进行系统进化树分析、氨基酸序列同源性分析、糖基化位点、蛋白结构跨膜区分析及磷酸化位点预测分析。核苷酸序列测定结果表明:HN基因的序列长度为1743bp,该基因的开放阅读框(Open Reading Frame,ORF)总长为1716 bp,编码571个氨基酸。生物信息学表明:试验获得的HN基因具有6个潜在糖基化位点及12个半胱氨酸残基,第5个潜在糖基化位点(508-510 aa)发生缺失及第123位半胱氨酸残基被色氨酸残基取代。La Sota株HN基因编码的蛋白质中有29个丝氨酸、10个酪氨酸和16个苏氨酸可能成为蛋白激酶磷酸化位点。将试验获得的La Sota株HN基因序列和推导的氨基酸序列与新城疫毒株的HN基因相应序列比较后发现,它们的核苷酸序列同源性和氨基酸序列同源性最高均可达到99%,表明HN基因在种属间具有较高的保守性。研究为新城疫病毒的分子病毒学研究奠定了基础。     

拟南芥种皮色素形成机制的研究进展

类黄酮为拟南芥种皮的主要成色物质,其生物合成过程受到一系列基因的影响.这些基因中,一部分为结构基因(TT4、TT5、TT6、TT7、FLS1TT3,LDOX和BAN)编码一些酶类参与到类黄酮的生物合成;一部分作为调控基因(TT1,TT2,TT8,TTG1,TTG2和TT16)编码一些酶对生物合成途径起调控作用;另外一些基因(TT12,TT19)编码与色素转运、积累相关的蛋白质。这些基因中的一种或几种发生变异就能影响到类黄酮的生物合成,从而引起拟南芥种皮色泽的变异。在此,就拟南芥种皮的色泽变异及类黄酮生物合成机理作一介绍。     

几种外源激素对韭葱种子发芽的影响

本试验以韭葱为材料,用几种不同浓度的外源激素:吲哚乙酸(IAA)、萘乙酸(NAA)和赤霉素(GA3)处理,结果表明,除100 mg/L的NAA外,各种处理对韭葱种子的发芽势和发芽率都有一定程度的提高,其中以50 mg/L的GA3处理效果最佳.     

植物开花光周期反应的分子调控机制

植物开花时间受到日照长短季节性变化的调节,拟南芥和水稻中与光周期反应相关基因的分离,使人们得以认识植物开花光周期反应的分子调控机制。植物感知日照长短的变化主要由CONSTANS(CO)基因的表达所控制。CO能够将光信号与生物钟信号整合,调节开花基因FLOWERING LOCUS T(FT)的表达,并最终控制植物的开花时间。本文对这一研究的最新进展进行了综述。     

不同水分,温度条件下CO2浓度对大米品质的影响

试验选用当年新收获的稻谷加工成的水分为１３．９％、１４．７％和１６．０％的大米，在２３℃和３３℃的恒温室中，将７种不同浓度的ＣＯ２经减压调湿后通入粮堆。定期取样，测定大米的脂肪酸、水溶酸、还原糖、非还原糖、粘度和过氧化物酶活性的变化。试验结果表明：１３．９％水分的大米在２３℃下储藏，各种浓度ＣＯ２对大部分品质指标影响不显著，ＣＯ２的保质作用不明显；１４．７％水分的大米在２３℃储藏，ＣＯ２对个别品质     

Experimental Investigation on Chip-break Influenced by Cryogenical Cold Air jet

In machine cutting, the replacement of traditionalKGcutting solution with cryogenical cold air jet not only possesses a good cooling and lubricating efficiency, but also can avoid the occurrenceof environmental pollution. In order to clarify the manner and performance of discharged cutting chip under cryogenical cold air jet condition, an experiment was carried out for steel grade 45 in the dry and cryogenical cold air jet cutting comparatively. The effects of cryogenical cold air jet on the breaking of cutting chip are discussed. Experimental results reveal that, in the valid ranges of pressure and temperature, the cryogenical cold air jet can widen the chip broken region effectively. Different insufflating angle of cold air behaves different influence on the chip-break. From the experiment, it has been gained that the optimized jet insufflatingangle, temperature effecting range and pressure working range of cold air, which provides the foundation of industrial manufacturing.     

Effect of the Silicic Acid Polymerization Degree on the Coagulating Property of Polyalumium Silicate Chloride

Polyaluminum silicate is a new type of inorganic macromolecular flocculants, which is developed as a complex product in recent years on the base of polyalumium flocculant and polysilicic acid flocculant. Sodium silicate is diluted to the concentration of 3.0% SiO 2 with distilled water. The solution was adjusted to pH 4.5 with sulphate acid and kept at quiescency for different time to get polysilicic acid with different polymerization degrees. Using polysilicic acid prepared and aluminium chloride as materials, a series of polyaluminium silicate chlorides(PASC) with different basicities(B), Al/Si molar ratios and polymerization degree of silicic acid are prepared by copolymerization technique. The Al-Ferron timed complex colorimetric method is applied to characterize species distribution of PASC and to study its influence factors. The interaction between hydrolyzed aluminum species and polysilicic acid with different polymerization degrees in PASC is discussed.The flocculant prepared is applied to the treatment of commercial concrete wastewater. The turbidity removal of commercial concrete wastewater is up to 97% when a PASC, prepared with polysilicic acid of 145 min polymerization degree.