Leaf photosynthetic traits of 14 tropical rain forest species in relation to leaf nitrogen concentration and shade tolerance

Variability of leaf traits related to photosynthesis was assessed in seedlings from 14 tree species growing in the tropical rain forest of French Guiana. Leaf photosynthetic capacity (maximum rate of carboxylation and maximum rate of electron transport) was estimated by fitting a biochemical model of photosynthesis to response curves of net CO2 assimilation rate versus intercellular CO2 mole fraction. Leaf morphology described by leaf mass per unit leaf area (LMA), density and thickness, as well as area- and mass-based nitrogen (N) and carbon (C) concentrations, were recorded on the same leaves. Large interspecific variability was detected in photosynthetic capacity as well as in leaf structure and leaf N and C concentrations. No correlation was found between leaf thickness and density. The correlations between area- and mass-based leaf N concentration and photosynthetic capacity were poor. Conversely, the species differed greatly in relative N allocation to carboxylation and bioenergetics. Principal component analysis (PCA) revealed that, of the recorded traits, only the computed fraction of total leaf N invested in photosynthesis was tightly correlated to photosynthetic capacity. We also used PCA to test to what extent species with similar shade tolerances displayed converging leaf traits related to photosynthesis. No clear-cut ranking could be detected among the shade-tolerant groups, as confirmed by a one-way ANOVA. We conclude that the large interspecific diversity in photosynthetic capacity was mostly explained by differences in the relative allocation of N to photosynthesis and not by leaf N concentration, and that leaf traits related to photosynthetic capacity did not discriminate shade-tolerance ranking of these tropical tree species.     

Triblock copolymer syntheses of mesoporous silica with periodic 50 to 300 angstrom pores

Use of amphiphilic triblock copolymers to direct the organization of polymerizing silica species has resulted in the preparation of well-ordered hexagonal mesoporous silica structures (SBA-15) with uniform pore sizes up to approximately 300 angstroms. The SBA-15 materials are synthesized in acidic media to produce highly ordered, two-dimensional hexagonal (space group p6mm) silica-block copolymer mesophases. Calcination at 500 degrees C gives porous structures with unusually large interlattice d spacings of 74.5 to 320 angstroms between the (100) planes, pore sizes from 46 to 300 angstroms, pore volume fractions up to 0.85, and silica wall thicknesses of 31 to 64 angstroms. SBA-15 can be readily prepared over a wide range of uniform pore sizes and pore wall thicknesses at low temperature (35 degrees to 80 degrees C), using a variety of poly(alkylene oxide) triblock copolymers and by the addition of cosolvent organic molecules. The block copolymer species can be recovered for reuse by solvent extraction with ethanol or removed by heating at 140 degrees C for 3 hours, in both cases, yielding a product that is thermally stable in boiling water.     

Acute Toxicity and Anesthetic Effects of Clove Oil in Penaeus semisulcatus under Various Water Quality Conditions

Acute toxicity and anesthetic effects of clove oil were studied in P. semisulcatus (1.8–2.1 g body weight). The EC₅₀ 1-h (the concentration effective for 50% of test animals), LC₅₀ 1-h (the concentration lethal to 50% of test animals after 1 h) and LC₅₀ 24-h (the concentration lethal to 50% of test animals after 24 h) were calculated at concentrations of 25, 130 and 30 mg/l, respectively, at 30°C, salinity 40 ppt, pH 8.6 and dissolved oxygen >6 mg/l. Generally, with increasing concentrations of clove oil, the times required for sedation and anesthesia decreased, while the recovery times increased. At concentrations 50, 100, 150 and 200 mg/l under temperature of 30°C and salinity of 40 ppt, the times required for sedation were 6 ± 0.2, 2.5 ± 0.3, 2 ± 0.08 and 0.5 ± 0.08 min, while times required for complete recovery were calculated to be 4.5 ± 0.3, 5.5 ± 0.17, 6.5 ± 0.25 and 11 ± 0.38 min, respectively. Also, the times required for deep anesthesia were 20 ± 1, 5 ± 0.5, 3 ± 0.4 and 2.2 ± 0.5 min in the above concentrations, while the times required for complete recovery were 10 ± 1, 11 ± 1.5, 14 ± 2.2 and 16 ± 3 min, respectively. Furthermore, considering the times to sedation, deep anesthesia and recovery at different temperatures of 20°C, 25°C, 30°C and 35°C and salinities of 25, 30, 35, 40 and 48 ppt; the combinations of salinity plus temperature and clove oil concentration plus salinity had the greatest and the least effects.     

Simulating changes in global land cover as affected by economic and climatic factors

This paper describes two global models: (1) an Agricultural Demand Model which is used to compute the consumption and demand for commodities that define land use in 13 world regions; and, (2) a Land Cover Model, which simulates changes in land cover on a global terrestrial grid (0.5° latitude by 0.5° longitude) resulting from economic and climatic factors. Both are part of the IMAGE 2.0 model of global climate change. The models have been calibrated and tested with regional data from 1970–1990. The Agricultural Demand Model can approximate the observed trend in commodity consumption and the Land Cover Model simulates the total amount of land converted within 13 world regions during this period. Some degree of the spatial variability of deforestation has also been captured by the simulation. Applying the model to a “Conventional Wisdom” scenario showed that future trends of land conversions could be strikingly different on different continents even though a consistent scenario (IS92a from the IPCC) was used for assumptions about economic growth and population. Sensitivity analysis indicated that future land cover patterns are especially sensitive to assumed technological improvements in crop yield and computed changes in agricultural demand.     

Leaching of the herbicide Bromacil after application on railroads in the Netherlands

The herbicide bromacil was applied annually or once in 2 yr to a railway track on a sand bed. Once a year, in the Spring, just before a possible next application, samples were taken from various depths down to at least 80 cm for residue-analysis by gas chromatography. The procedure for extraction was adapted in order to eliminate interfering substances originating from the dark top layer of the soil. Bromacil contents were always highest in the 10 to 20 cm layer. Within the first 2 yr of the experiments the compound penetrated down to depths around 100 cm. Calculations showed that deeper penetration of bromacil was probable. On account of the low conversion rate of the herbicide it seems possible that a part of the bromacil dosage leached to the groundwater later on.[/p]     

Seasat altimeter calibration: initial results

Preliminary analysis of radar altimeter data indicates that the instrument has met its specifications for measuring spacecraft height above the ocean surface (+/- 10 centimeters) and significant wave height (+/- 0.5 meter). There is ample evidence that the radar altimeter, having undergone development through three earth orbit missions [Skylab, Geodynamics Experimental Ocean Satellite 3 (GEOS-3), and Seasat], has reached a level of precision that now makes possible its use for important quantitative oceanographic investigations and practical applications.     

Chemical composition and some anti-nutrient content of raw and processed bitter vetch (<Emphasis Type="Italic">Vicia ervilia</Emphasis>) seed for use as feeding stuff in poultry diet

An experiment was conducted to determine chemical composition of raw and treated bitter vetch seed for use in poultry diets. Processing methods were: soaked in water for 12 h, then autoclaved and dried (SA); coarsely ground, soaked in water for 24 h, autoclaved and dried (GSA); coarsely ground, soaked in water for 47 h with exchange of water every 12 h, cooked and dried (GSC); coarsely ground, soaked in solution of 1% acetic acid for 24 h at 60°C and dried (GAA). Raw bitter vetch seed was contained 94.52, 26.56, 0.4, 58.86, 3.38, 5.32, 12.28 and 14.20 percent DM, CP, EE, NFE, Ash, CF, ADF and NDF, respectively. Its GE, AME, AMEn, TME and TMEn values were 18.10, 13.15, 14.38, 14.10 and 14.69 MJ/kg, respectively. Results indicated that bitter vetch is a good source of Fe (340 ppm) and Cu (46.7 ppm). It s amino acid profile was suitable and methionine was the first limiting amino acid when compared with broiler and layer chicks requirements. Its canavanine and tannin content were 0.78 and 6.7 mg/kgDM, respectively. Processing methods improved CP and in some cases AMEn. All processing methods especially GSC resulted in a significant (P < 0.05) reduction in canavanine and tannin.     

Identification of equine herpesvirus 3 (equine coital exanthema virus), equine gammaherpesviruses 2 and 5, equine adenoviruses 1 and 2, equine arteritis virus and equine rhinitis A virus by polymerase chain reaction

OBJECTIVE: To develop rapid (< 8 hour) tests using polymerase chain reaction (PCR) for the diagnosis of equine herpesvirus 3 (EHV3; equine coital exanthema virus), equine gammaherpesviruses 2 (EHV2) and EHV5, equine adenovirus 1 (EAdV1), EAdV2, equine arteritis virus (EAV), equine rhinitis A virus (ERAV; formerly equine rhinovirus 1) DESIGN: Either single round or second round (seminested) PCRs were developed and validated. METHODS: Oligonucleotide primers were designed that were specific for each virus, PCR conditions were defined and the specificity and sensitivity of the assays were determined. The application of the tests was validated using a number of independent virus isolates for most of the viruses studied. The PCRs were applied directly to clinical samples where samples were available. RESULTS: We developed a single round PCR for the diagnosis of EHV3, a seminested PCR for EHV2 and single round PCRs for EHV5, EAdV1, EAdV2 and RT-PCRs for EAV and ERAV. The PCR primer sets for each virus were designed and shown to be highly specific (did not amplify any recognised non-target template) and sensitive (detection of minimal amounts of virus) and, where multiple virus isolates were available all isolates were detected. CONCLUSION: The development and validation of a comprehensive panel of PCR diagnostic tests, predominantly for viruses causing equine respiratory disease, that can be completed within 8 hours from receipt of clinical samples, provides a major advance in the rapid diagnosis or exclusion diagnosis of these endemic equine virus diseases in Australia.     

The successional status of tropical rainforest tree species is associated with differences in leaf carbon isotope discrimination and functional traits

We characterised the among species variability in leaf gas exchange and morphological traits under controlled conditions of seedlings of 22 tropical rainforest canopy species to understand the origin of the variability in leaf carbon isotope discrimination (Δ) among species with different growth and dynamic characteristics (successional gradient). Our results first suggest that these species pursue a consistent strategy in terms of Δ throughout their ontogeny (juveniles grown here versus canopy adult trees from the natural forest). Second, leaf Δ was negatively correlated with WUE and N, and positively correlated with g_s, but among species differences in Δ were mainly explained by differences in WUE. Finally, species belonging to different successional groups display distinct leaf functional and morphological traits. We confirmed that fast growing early successional species maximise carbon assimilation with high stomatal conductance. In contrast, fast and slow growing late successional species are both characterised by low carbon assimilation values, but by distinct stomatal conductance and leaf morphological features. Along the successional gradient, these differences result in much lower Δ for the intermediate species (i.e. fast growing late successional) as compared to the two other groups.