Polymeric nanoparticles as an oral delivery system for biocontrol agents for the brushtail possum (Trichosurus vulpecula)

Abstract

AIM: To investigate polymeric nanoparticles as an oral delivery system for protein biocontrol agents for control of the brushtail possum, Trichosurus vulpecula.

METHODS: Insulin-loaded poly(ethyl 2-cyanoacrylate) (PECA) nanoparticles were prepared using interfacial polymerisation, and characterised for size, zeta potential, and efficiency of encapsulation of insulin. In-vitro release of insulin-loaded PECA nanoparticles was quantified using reverse-phase highpressure liquid chromatography (HPLC). The in-vivo pharmacokinetics of insulin in PECA nanoparticles was investigated following I/V administration, and when injected directly into the caecum alone or in conjunction with the permeation enhancer EDTA. Blood samples were collected at intervals from ?5 to 180 minutes, and the concentration of insulin in plasma was quantified using a radioimmunoassay (RIA) validated for possum plasma.

RESULTS: Poly(ethyl 2-cyanoacrylate) nanoparticles were produced with a uniform particle size of 200–300 nm, and the mean entrapment of insulin was 78%. In-vitro release of insulin from the PECA nanoparticles was controlled, although incomplete, and approximately 30% of the insulin remained entrapped. The bioavailability of insulin when administered in a PECA nanoparticulate formulation injected directly into the caecum was <1%, and was not increased by addition of the permeation enhancer.

CONCLUSIONS: The nanoparticulate formulations investigated as part of this study resulted in low bioavailability of the peptide insulin in the brushtail possum.     

The structure of the upper atmosphere of mars: In situ accelerometer measurements from mars global surveyor

The Mars Global Surveyor (MGS) z-axis accelerometer has obtained over 200 vertical structures of thermospheric density, temperature, and pressure, ranging from 110 to 170 kilometers, compared to only three previous such vertical structures. In November 1997, a regional dust storm in the Southern Hemisphere triggered an unexpectedly large thermospheric response at mid-northern latitudes, increasing the altitude of thermospheric pressure surfaces there by as much as 8 kilometers and indicating a strong global thermospheric response to a regional dust storm. Throughout the MGS mission, thermospheric density bulges have been detected on opposite sides of the planet near 90 degreesE and 90 degreesW, in the vicinity of maximum terrain heights. This wave 2 pattern may be caused by topographically-forced planetary waves propagating up from the lower atmosphere.     

Organophosphorus residues in wool grease resulting from specified on-farm lice and flystrike control treatments

Objective To investigate wool organophosphorus concentrations resulting from a range of farm pesticide application methods.
Design Random sampling of wool for pesticide residues and on-farm interviews to determine associated treatments.
Procedure Tasmanian fleece wool lots were sampled at random and tested for organophosphorus residues. The grower was identified and the pesticide treatments applied to the sheep were ascertained by on-farm interview.
Results The residue concentrations showed a large variation that was not accounted for by differences in treatments by growers. Organophosphorus concentrations were proportional to the number of treatments applied, and inversely related to the time between pesticide application and the subsequent shearing, and were significantly influenced by the method of application. After allowing for the time of application, plunge dipping resulted in pesticide residue concentrations 2 to 2.5 times greater than shower dipping, using spray races or hand jetting, and the use of these methods caused larger residues than the use of jetting races.
Conclusions We recommend that plunge or shower dipping should not be used more than 7 weeks after shearing, nor at higher concentration than the standard dose rate used for lice control, whereas jetting may be satisfactory for up to 7 months after shearing, provided only one application is administered.     

Development and trial of a bovine herpesvirus 1 - thymidine kinase deletion virus as a vaccine

SUMMARY An Australian bovine herpesvirus 1 (BHV1) isolate with a defined (427 base pair) deletion in the protein coding region of the thymidine kinase gene was obtained by standard marker rescue procedures. After selection in the presence of the nucleotide analogue 5iodo-deoxy-uridine the virus was analysed by hybridisation with three differential oligonucleotide probes, restriction endonuclease profile studies and DNA sequence analysis. The virus elicited an immune response in recipient animals after either intramuscular or intravenous administration and produced no significant deleterious side-effects when administered at a dose sufficient to stimulate the host immune response. The safety and immunogenicity of the recombinant BHV1 virus 39B1 were similar to those reported for other registered BHV1 vaccines and the virus would appear to be suitable for the production of a vaccine seed lot and more exhaustive field trials as a prelude to commercial vaccine production and registration.     

Mechanical testing of a steel-reinforced epoxy resin bar and clamp for external skeletal fixation of long-bone fractures in cats

AIMS: To provide veterinarians with confidence when using a commercially available epoxy resin in external skeletal fixators (ESF), testing was conducted to determine exothermia during curing of the epoxy resin compared to polymethylmethacrylate (PMMA), the hardness of the epoxy resin as a bar over 16 weeks, and the strength of the epoxy resin bar compared with metal clamps in similarly constructed Type 1a ESF constructs simulating the repair of feline long bone fractures.

METHODS: Exothermia of the epoxy resin during curing was tested against PMMA with surface temperatures recorded over the first 15 minutes of curing, using four samples of each product. The hardness of 90 identical epoxy resin bars was tested by subjecting them to cyclic loads (1,000 cycles of 20.5?N, every 7 days) over a 16-week period and impact testing 10 bars every 2 weeks. Ten bars that were not subjected to cyclic loads were impact tested at 0 weeks and another 10 at 16 weeks. Strength of the epoxy resin product, as a bar and clamp composite, was tested against metal SK and Kirschner-Ehmer (KE) clamps and bars in Type 1a, tied-in intramedullary pin, ESF constructs with either 90° or 75° pin placement, subjected to compressive and bending loads to 75?N.

RESULTS: The maximum temperature during curing of the epoxy resin (min 39.8, max 43.0)°C was less than the PMMA (min 85.2, max 98.5)°C (p<0.001). There was no change in hardness of the epoxy resin bars over the 16 weeks of cyclic loading (p=0.58). There were no differences between the median strength of the epoxy resin, SK or KE ESF constructs in compression or bending when tested to 75?N (p>0.05). Stiffness of constructs with 75° pin placement was greater for SK than epoxy resin constructs in compression (p=0.046), and was greater for KE than epoxy resin constructs in bending (p=0.033).

CONCLUSIONS: The epoxy resin tested was found to be less exothermic than PMMA; bars made from the epoxy resin showed durability over an expected fracture healing timeframe and had mechanical strength characteristics comparable to metal bar and clamp ESF constructs.

CLINICAL RELEVANCE: The epoxy resin ESF construct tested in this study can be considered a suitable replacement for SK or KE ESF constructs in the treatment of feline long-bone fractures, in terms of mechanical strength.