Electromyographic activity of the longissimus dorsi muscles in horses during trotting on a treadmill

OBJECTIVE: To use electromyography (EMG) to measure physiologic activity of the longissimus dorsi muscles of horses during trotting on a treadmill. ANIMALS: 15 adult horses (5 to 20 years old that weighed 450 to 700 kg) that did not have clinical signs of back pain. PROCEDURE: Data were recorded for each horse during trotting on a treadmill at speeds of 2.6 to 4.4 m/s. Surface electromyography was recorded bilaterally from the longissimus dorsi muscles at the levels of T12, T16, and L3. RESULTS: In each motion cycle, 2 EMG maxima were found at the end of the diagonal stance phases. The EMG activity peaked slightly later at L3 than at T12 and T16. Maximum EMG amplitudes were highest at T12 and decreased caudally, with mean +/- SD values of 4.51 +/- 1.20 mV at T12, 3.00 +/- 0.83 mV at T16, and 1.78 +/- 0.67 mV at L3. Mean minimum EMG activity was 1.30 +/- 0.63 mV at T12, 0.83 +/- 0.35 mV at T16, and 0.80 +/- 0.39 mV at L3. The relative amplitudes (ie, [maximum - minimum]/maximum) were 67 +/- 11% at T12, 66 +/- 8% at T16, and 71 +/- 8% at L3. CONCLUSIONS AND CLINICAL RELEVANCE: Activity of the longissimus dorsi muscles is mainly responsible for stabilization of the vertebral column against dynamic forces. The difference between minimum and maximum activity may allow application of this method as a clinical tool. Data reported here can serve as reference values for comparison with values from clinically affected horses.     

An animal model for interface tissue formation in cemented hip replacements

OBJECTIVE: To create a model in sheep for investigation of early changes related to the formation of an interface membrane in hip prosthesis. STUDY DESIGN: Experimental study. ANIMALS: Twenty-four female adult Swiss Alpine sheep. METHODS: Sheep were divided into 2 groups of 12 for unilateral cemented total hip arthroplasty. In Group I, the prosthesis was fixed with retrograde cement gun injection to achieve a complete cement mantle, whereas in Group II a primary cement mantle defect was produced. Groups I and II were further divided into 2 sub-groups with study end points of 2 and 8.5 months after surgery. Radiographs were evaluated postoperatively and at euthanasia for migration of the femoral component and bone resorption. Histologic sections were evaluated semiquantitatively for changes in cell types and numbers, and bone reactions; and quantitatively for size of interface membrane and new bone formation. RESULTS: Radiographically, there tended to be an increase in bone resorption and periosteal bone formation throughout the femoral shaft in Group II compared with Group I, but this was only statistically significant at the region of the femoral neck (R5) at both time periods (P<.05). Semiquantitative histologic evaluation revealed significant increases (P<.05) in cellularity, numbers of fibroblasts, giant cells, macrophages, and mononuclear cells, in Group II primarily at 2 months after surgery. This was also true for interface membrane formation and bone remodeling. Quantitative data showed an increased in the size of the interface membrane and area of bone formation at 8.5 months in Group II. CONCLUSIONS: The cement defect model offered controlled and repeatable production of an interface membrane. The results suggest that a primary cement mantle defect could be a possible trigger for implant instability, eliciting a cascade of biomechanical and molecular events in bone tissue leading to aseptic loosening. CLINICAL RELEVANCE: The results show the effect of defects in the cement mantle in promoting interface membrane formation. Long-term and biochemical studies are required to evaluate the relevance of this interface membrane formation.     

Symphysiotomy, symphysiectomy, and intermandibular arthrodesis in a cat with open-mouth jaw locking--case report and literature review

A Persian cat was presented with open-mouth jaw locking. It was suspected that abnormal extrusion of the maxillary canine teeth caused contact with the mandibular canine teeth on closure of the mouth, resulting in levering forces that may have led to increased symphyseal mobility, temporomandibular joint laxity, rotational movement of the left mandibular body and locking of the left coronoid process lateral to the zygomatic arch. Symphysiotomy, symphysiectomy, circumferential and interdental wiring, and intraoral resin-based splint application were performed to achieve intermandibular arthrodesis. Following removal of all devices, no further jaw locking episodes were reported during a 33-month follow-up period.     

Fast mass transport through sub-2-nanometer carbon nanotubes

We report gas and water flow measurements through microfabricated membranes in which aligned carbon nanotubes with diameters of less than 2 nanometers serve as pores. The measured gas flow exceeds predictions of the Knudsen diffusion model by more than an order of magnitude. The measured water flow exceeds values calculated from continuum hydrodynamics models by more than three orders of magnitude and is comparable to flow rates extrapolated from molecular dynamics simulations. The gas and water permeabilities of these nanotube-based membranes are several orders of magnitude higher than those of commercial polycarbonate membranes, despite having pore sizes an order of magnitude smaller. These membranes enable fundamental studies of mass transport in confined environments, as well as more energy-efficient nanoscale filtration.     

Cassini dust measurements at Enceladus and implications for the origin of the E ring

During Cassini's close flyby of Enceladus on 14 July 2005, the High Rate Detector of the Cosmic Dust Analyzer registered micron-sized dust particles enveloping this satellite. The dust impact rate peaked about 1 minute before the closest approach of the spacecraft to the moon. This asymmetric signature is consistent with a locally enhanced dust production in the south polar region of Enceladus. Other Cassini experiments revealed evidence for geophysical activities near Enceladus' south pole: a high surface temperature and a release of water gas. Production or release of dust particles related to these processes may provide the dominant source of Saturn's E ring.     

Naive and memory CD4+ T cell survival controlled by clonal abundance

Immunity to a plethora of microbes depends on a diverse repertoire of na?ve lymphocytes and the production of long-lived memory cells. We present evidence here that low clonal abundance in a polyclonal repertoire favors the survival and activation of na?ve CD4(+) T cells as well as the survival of their memory cell progeny. The inverse relation between clonal frequency and survival suggests that intraclonal competition could help maintain an optimally diverse repertoire of T cells and an optimal environment for the generation of long-lived memory cells.     

Ethanol can contribute to energy and environmental goals

To study the potential effects of increased biofuel use, we evaluated six representative analyses of fuel ethanol. Studies that reported negative net energy incorrectly ignored coproducts and used some obsolete data. All studies indicated that current corn ethanol technologies are much less petroleum-intensive than gasoline but have greenhouse gas emissions similar to those of gasoline. However, many important environmental effects of biofuel production are poorly understood. New metrics that measure specific resource inputs are developed, but further research into environmental metrics is needed. Nonetheless, it is already clear that large-scale use of ethanol for fuel will almost certainly require cellulosic technology.     

Genetic partitioning of variation in ovulatory follicle size and probability of pregnancy in beef cattle

The objectives of this research were to partition variation in ovulatory follicle size into genetic and nongenetic components and to assess the utility of ovulatory follicle size as an indicator trait associated with reproductive success in beef cattle. Data were collected during the years 2002 to 2005 from 780 beef females that ranged in age from 1 to 12 yr (mean of 2.4 observations per female). Data were analyzed with a multiple trait Gibbs sampler for animal models to make Bayesian inferences from flat priors. A chain of 500,000 Gibbs samples was thinned to every 200th sample to produce a posterior distribution composed of 2,500 samples. Heritability estimates (posterior mean +/- SD) were 0.16 +/- 0.03 for follicle size and 0.07 +/- 0.02 and 0.02 +/- 0.01 for pregnancy rate as a trait of the female and service sire, respectively. Posterior means of genetic correlations were all <0.10, with 0.00 contained within the respective 90% probability density posterior intervals. Results indicate that whereas follicle size is of greater heritability than pregnancy rate, its usefulness to improve reproductive rate is greatest as an ancillary phenotype in multiple trait selection.