Allometric model of the height–diameter curve for even-aged pure stands of Japanese cedar (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>)

We derived an allometric model of the height–diameter curve for even-aged pure stands, which was a modification of the earlier model proposed by Inoue (2000a). An individual-dependent allometric equation was used as the height–diameter curve. Using the discriminant analysis method, all trees composed of a stand were stratified into upper and lower trees. It was assumed that both relationships between mean tree height H _m and upper tree height H _u and between mean DBH D _m and mean DBH of upper trees D _u could be described by the time-dependent allometric power equations. The height–diameter curve showed an average relationship between tree height and DBH of a given stand at a given time, and hence it could be assumed that the height–diameter curve contained two points (D _m , H _m ) and (D _u , H _u ). With these assumptions, we derived an allometirc model of height–diameter curve, which allowed the coefficients of the curve to be estimated from mean tree height and mean DBH. The proposed model was fitted to Japanese cedar (Cryptomeria japonica D. Don) data. The error ratio of the allometric model ranged from 2.254% to 13.412% (mean = 6.785%), which was significantly smaller than that of the earlier model. When the error of mean tree height was ±1.0 m or less, the effect of the error of mean tree height on the error ratio was comparatively small. This suggested that the error of ±1.0 m in mean tree height could be accepted in the estimation of height–diameter curve using the allometric model. These features enable us to combine the allometric model with Hirata’s vertical angle-count sampling or growth models. In conclusion, the allometric model would be one of the most practical and convenient approaches for estimating the height–diameter relationship of even-aged pure stands.     

Compressive and tensile properties of a butt-jointed lamination model

A study was undertaken to evaluate the effect of glue application and placement of butt-joints on the compressive and tensile properties in a butt-jointed lamination. The aim was to provide background information for producing butt-jointed, glued, laminated timber. Three butt-jointed lamination models were prepared from spruce-pine-fir (S-P-F) dimension lumber with glued and nonglued butt joints, with different placements of the butt joints in the models. The axial stiffness and strength properties were assessed using both compressive and tensile tests. The results of the study indicated that for the compressive lamination model the application of glue at the butt joint gave more stiffness than the nonglued butt joint. Neither glue application nor placement of the joint had a statistically significant effect on the compressive strength. There were no significant differences between the glued and nonglued butt joint for either tensile strength or stiffness.     

Comparison of bacterial endotoxin lipopolysaccharide concentrations in the blood,ovarian follicular fluid and uterine fluid: a clinical case of bovine metritis

We investigated the concentration of the bacterial endotoxin lipopolysaccharide (LPS) in the blood, ovarian follicular fluid and uterine fluid of a clinical case of bovine metritis. A 2-year-old lactating Holstein cow exhibited continuous fever >39.5°C for more than 2 weeks after normal calving. The cow produced a fetid, watery, red-brown uterine discharge from the vagina and was diagnosed with metritis. The LPS concentrations in plasma and uterine fluid were 0.94 and 6.34 endotoxin units (EU)/ml, respectively. One of seven follicles showed an extremely high level of LPS (12.40 EU/ml) compared to the other follicles (0.62–0.97 EU/ml). These results might suggest the presence of high concentration of LPS in follicles in cows with postpartum metritis.     

Effects of acrosomal conditions of frozen-thawed spermatozoa on the results of artificial insemination in Japanese Black cattle

The purposes of this study were to examine the relationship between male artificial insemination (AI) fertility and sperm acrosomal conditions assessed by new and conventional staining techniques and to identify possible reproductive dysfunctions causing low conception rates in AI using frozen-thawed spermatozoa with poor acrosomal conditions in Japanese Black bulls. We investigated individual differences among bulls in the results concerning (1) acrosomal conditions of frozen-thawed spermatozoa as assessed by not merely peanut agglutinin-lectin staining (a conventional staining technique) but also immunostaining of acrosomal tyrosine-phosphorylated proteins (a new staining technique), (2) routine AI using frozen-thawed spermatozoa as assessed by pregnancy diagnosis, (3) in vivo fertilization of frozen-thawed spermatozoa and early development of fertilized eggs as assessed by superovulation/AI-embryo collection tests and (4) in vitro fertilization of frozen-thawed spermatozoa with oocytes. The percentages of frozen-thawed spermatozoa with normal acrosomal conditions assessed by the abovementioned staining techniques were significantly correlated with the conception rates of routine AI, rates of transferable embryos in superovulation/AI-embryo collection tests and in vitro fertilization rates. These results are consistent with new suggestions that the distribution of acrosomal tyrosine-phosphorylated proteins as well as the acrosomal morphology of frozen-thawed spermatozoa are AI fertility-associated markers that are valid for the prediction of AI results and that low conception rates in AI using frozen-thawed spermatozoa with poor acrosomal conditions result from reproductive dysfunctions in the processes between sperm insemination into females and early embryo development, probably failed fertilization of frozen-thawed spermatozoa with oocytes.     

A model of seasonal foliage dynamics of the subtropical mangrove species Rhizophora stylosa Griff.growing at the northern limit of its distribution

Background： Progress of forest production in response to the environment requires a quantitative understanding of leaf area development. Therefore, it is necessary to investigate the dynamics of seasonal crown foliage in order to understand the productivity of mangroves, which play an important role in the subtropical and tropical coastlines of the world. Method： Crown foliage dynamics of the mangrove Rhizophora styloso were studies to reveal patterns of leaf recruitment, survival and seasonal leaf area growth. Results： Flushing of leaves occurred throughout the year, but both flushing and leaf area growth pattern of leaves varied with season. Maximum flushing occurred in summer, but leaf areas did not differ significantly with season. The half-expansion period is longer, and the intrinsic rate of increase was lower in winter. Summer flushed leaves grew faster at their initial stage and reached their maximum area over a shorter period of time. The difference in temperature and air vapor pressure deficit （VPD） between summer and winter contributed to the present dynamics of foliage patterns. The mean leaf longevity was estimated to be 13.1 month. The crown foliage area was almost stable throughout the year. Conclusions： Homeostatic control of the crown foliage area may be accompanied by the existence of ecophysiological mechanisms in R. stylosa. Integrating crown foliage dynamics into forest models represents an important step towards incorporating physiological mechanisms into the models for predicting growth responses to environmental changes and for understanding the complex responses of tree growth and litter production.     

Annual net production of the five Sargassaceae species in Yoro,western Wakasa Bay,Sea of Japan

ABSTRACT:   Annual net production of the five Sargassaceae species was investigated in Yoro, western Wakasa Bay, Sea of Japan. The Sargassaceae species were collected at a depth of 2.0–2.5 m and subjected to stratified clipping for 13 months. Annual net production was estimated at 2407 g dry wt/m² for Sargassum patens , 2132 g dry wt/m² for Sargassum macrocarpum , 1458 g dry wt/m² for Sargassum siliquastrum , 1197 g dry wt/m² for Myagropsis myagroides , and 1471 g dry wt/m² for Sargassum piluliferum . The ratio of annual net production to maximum biomass (P/B_max) for these species ranged between 1.3 and 1.7, being higher than in previous studies which used the same method. Winter storms with strong wave exposure and relatively calm condition in Yoro were considered to augment P/B_max. The total losses estimated from the different units of stratified clipping were compared. If larger and less segregated units were applied, the total loss would decrease. It was suggested that a 50 cm stratum would be applicable to the larger species (3 m or longer) and a stratum of 20 cm or less would be applicable to mid-sized or smaller species (less than 3 m).     

Tank culture of yellowfin tuna, Thunnus albacares: developing a spawning population for research purposes

A land-based culture facility for research on yellowfin tuna, Thunnus albacares, was developed at the Achotines Laboratory in the Republic of Panama. Six concrete tanks, and seawater and life support systems were built to maintain a yellowfin broodstock. On average, 50% of the yellowfin caught survived capture and handling, and approximately 30% became broodstock in Tank 1 (17 m diameter, 6 m depth) or Tank 2 (8.5 m diameter, 3 m depth). Each fish was tagged with a microchip implant tag, then weighed, measured, and injected with oxytetracycline (OTC) prior to stocking. Daily rations of primarily market squid, Loligo opalescens, and Pacific thread herring, Opisthonema spp., were regulated based on the feeding activity and energy requirements of the fish. Feeding activity of the broodstock decreased when the water temperatures decreased, and the fish ate decreasing daily rations and increasing calories with increasing size. Spawning occurred in both tanks within 6–8 months of capture. Spawning first occurred in Tank 1 when 24 females ranged in size from 6 to 16 kg and 65 to 93 cm fork length (FL). Spawning was intermittent during the first 2 months and occurred near daily thereafter. Tank size appeared to affect survival rates, the types of mortalities that occurred, and the growth of the fish. Survival rates after 1 year in captivity were higher, and the fish were larger, on average, in Tank 1 than in Tank 2. Most of the mortalities in Tank 1 were the result of wall strikes, which occurred more frequently after the fish reached their highest density of 0.64 kg m⁻³ and sizes greater than 96 cm FL and 19 kg. Non-linear growth models were fitted to the initial stocking sizes and final sizes of fish that died or were removed from Tank 1 during 1996–1999. Estimated growth rates in length (11–48 cm year⁻¹) for fish between 51 and 150 cm FL decreased with increasing length. Estimated growth rates in weight ranged from 9 to 19 kg year⁻¹ for fish less than 19 kg and 20–23 kg year⁻¹ for fish greater than 19 kg. The results of this work demonstrate that the stable environment of a land-based culture facility may be the preferred system for long-term maintenance of a yellowfin broodstock.