Performance and Microstructure of Ultra Low Ion Permeability Cementitious Materials

Microstructure and macro performance of Ultra Low Ion Permeability Cementitious Materials (ULIPCM) were investigated by Micro hardness, MIP and SEM EDXA. It was shown that the compressive strength of ULIPCM was more than 80 MPa, flexural strength was more than 11.0 MPa, and elastic modulus was in the range of 38.0 to 42.0 GPa at the age of 28 days; chloride diffusion coefficient was lower than 0.8×10－13m2·s－1, conductive charge for 6 hours was lower than 300 coulombs; sulfate attack resistance was good; shrinkage at the age of 28 days was lower than 400×10－6. Compared with ordinary concrete with which thickness of interfacial transition zone is 60 to 100 μm, the thickness of interfacial transition zone of ULIPCM was lower than 30 μm. Penetration paths of corrosive medium were effectively interrupted in ULIPCM. And pore structure parameters, such as porosity and the most probable pore radius of ULIPCM, were also obviously optimized in ULIPCM. Besides, few CH crystals were in the ULIPCM aggregate and the interfacial transition zone of ULIPCM. And the orientation of CH crystals was poor.     

A Hilbert fractal antenna and portable monitoring system for partial discharge detection in gas insulated substations

We design a third Hilbert fractal antenna for partial discharge (PD) monitoring in gas insulated substations (GIS) based on fractal principles, and analyze the Hilbert antenna impedance characteristics using an equivalent inductance method of parallel transmission lines. The PD experiment of metal protrusion defect is conducted employing fractal and microstrip antennae. The test results show that the characteristic of the Hilbert fractal antenna has good performance and can detect the PD signal for online monitoring in GIS. A portable online monitoring and locating system for GIS is established using the Hilbert fractal antenna and LabVIEW. The locating accuracy of the PD source in the laboratory meets the requirements of the PD site location.     

Theory and approach to reactive power flow tracing

Based on an analysis of the characteristics of reactive power supplies and reactive loads, this paper presents a method for forming a lossless reactive network using an equivalent technique of modeling the branch admittance as a reactive power supply and the branch power loss as a virtual load. A downstream distribution matrix for a power system is constructed based on its reactive lossless network, and the analytical model and its algorithm for tracing reactive power flow (TRPF) is proposed. A method dealing with the abnormal downstream distribution matrix of active power flow also is discussed. The main advantage of the proposed method is that the matrix theory is used to analyze the TRPF model directly and no assumption on the flow distribution is needed. Case studies of the IEEE14 Bus and IEEE30 Bus systems demonstrate the accuracy and the validity of the proposed method.     

Theoretical Analysis and Testing of Ground Treatment Using an Expansive Method in Very Thick Collapsible Loess

Through technological research of foundation treatments in the collapsible loess areas, we recommend a method of treating foundations in collapsible loess with quicklime piles. We set forth the basic principle of this expansive method. When a very thick foundation in collapsible loess is treated, the computational formula for the volume of expanding material in a quicklime pile is deduced based on cavity expansion theory. This theory is applied to engineering practice. Physical and mechanical properties of the compacted soil are tested. The result shows that the collapsibility of a foundation in loess has been eliminated, its physico mechanical indexes have been improved, and the soil compressibility and the modulus of compressibility also increase remarkably, demonstrating the correctness of the computation theory. The feasibility of the expansive method for very thick collapsible loess areas is further established.     

Waste FR 4 printed circuit board recycling technology based on supercritical fluid carbon dioxide

To create a model for recycling technology, a waste FR 4 printed circuit board (PCB) recycling process employing supercritical fluid CO2 (SCF CO2) is studied using central composite design. The influence of temperature and treatment time on the PCB delamination ratio, latitudinal tensile strength of glass fiber sheets, and their synthesized effect are analyzed. The optimal temperature and treatment time for FR 4 PCB recycling with SCF CO2 are found by building a quadratic polynomial equation model of output parameters in recycling technology. The accuracy of the derived optimal temperature and treatment time is validated by a series of experiments.     

Key rock strata effecting analysis on surface boreholeshear deformation fracture

A good method for creating a surface borehole for withdrawing coal strata methane is to build before excavation and use during the whole process. But the excavation greatly affects the overlying rock strata, and when the excavation face passes through the     

Contact analysis of a new style planetary reducer with a double crank and internal gear board

To address the problems of low carrying capacity and short life of bearings in current ring reducers, a new type of ring reducer is proposed which consists of a two stepped transmission. One is a planetary transmission, and the other is an N type planetary transmission with a low tooth number difference. Based on the analysis of structural features, the transmission principle, and a transmission load situation, a contact finite element model of the new type of ring reducer is set up, and the stress value and the actual pairs of meshing teeth are derived by calculation. Based on gear modification research theory, the second stage transmission gear pairs of the new reducer are modified on its teeth profiles. Results demonstrate that the load capacity of transmission gear pairs have been enhanced greatly.     

The optimal energy efficiency of wireless networks nodes based on solar cells

To improve the energy efficiency of solar cells in wireless sensor networks nodes, the energy relationship between solar cells and the wireless sensor networks nodes is studied. An adaptive algorithm is adopted to ensure the wireless sensor networks work normally at different sunlight intensities. An energy model is designed that reveals the energy relationship between the output power of the solar cells and the power of nodes working normally at a standard sunlight intensity. The experimental results show that the model represents the adaptive energy relationship between the solar cells and the nodes, ensures that the nodes work stably in a long term, and extends the life cycle of the sensor networks as long as possible. The model has important guiding significance for wireless sensor networks designation.     

Experimental Analysis of Construction Time Space Effect for Large Span and Flat Multi Arch Tunnel

For the large span and flat, together with the interaction effect of construction and disturbance of surrounding rock, the mechanical of large span and flat multi arch tunnel is very complicated, and the time space effect is different from that of two lane multi arch tunnel or separated tunnel. Adopting the “CTSSSRH”, the 3 D dynamic process of the tunnel construction was simulated. Analyzing the rule of surrounding rock displacement and stress with excavation, the time space effect of large span and flat multi arch tunnel was proposed.