人在环路模拟驾驶仿真实验系统研发

汽车是人机协同控制的复杂系统,基于NI PXIe8108实时控制器、PXI7842R数据采集卡、模拟驾驶输入设备及相关软硬件搭建了驾驶模拟仿真系统;用LabVIEW编程语言建立了车辆动力学模型;用虚拟引擎Unity3D软件开发了视景系统;并通过数据库技术使仿真过程与视景系统相结合,实现仿真过程与三维动画实时视景系统的数据交互。结果表明：通过人在环路模拟驾驶仿真实验,使仿真过程中引入了驾驶模拟操纵,实现了人在环路的人机交互式仿真,得到汽车相关性能仿真结果,为驾驶过程中人和汽车协同控制仿真和极端工况下的仿真,提供了一种安全、可靠的人车协同控制仿真环境。     

Analysis of thermal stress in a water pipe of blast furnace copper stave

To solve the general problem that copper staves experience water pipe failure in blast furnace,the effects of constraints on the thermal stress distribution of copper stave water pipe are investigated by thermal-structural coupling analysis.In this study,a mathematical model of thermal stress of copper stave is established to analyze the thermal deformation and stress distribution of water pipe under subject to different types of constraints.The results show that the thermal stress on the root of water pipe is larger than others as the terminal of water pipe is free or being fixed.But the equivalent stress on the root of water pipe is just 45 MPa as the terminal of water pipe is free,which is lower than the yield strength of pure copper.The equivalent stress on the root of water pipe is about 272 MPa as the terminal of water pipe is being fixed,and exceeds the yield strength of pure copper.The water pipes should be flexible.The maximum equivalent stress is about 600 MPa as the water pipe is subjected to the constraint of shell,which is far beyond the yield strength of pure copper.The maximum displacement is located at the end of water pipe and is about 1.73 mm.Then the diameter of the hole should be 120 mm with taking installation error into consideration.     

Design for Precision Measurement System Based on Machine Vision

It is difficult to measure the geometric quantity of small parts in finishing, assembling and measuring, because it's easy to break the workpieces' surface and alter their position by means of traditional contact measuring methods.There are some non contact measurers, such as,light feeler pin and interference microscope etc., because of it's high price and strict working conditions,so it's difficult to promote them in widely use. Precision measurement system based on machine vision has the advantages of non contact measuring as well as high performance and low price. Some problems, such as light source, algorithm of edge fitting, auto focusing,are discussed.     

CAD Environment for Quoting Utility Boiler Based the Characteristic Construction

The authors discuss such questions for utility boiler as the complicated flameworks,combined quoting course, long cycle, hardly controlling the quoting veracity and so on. Based on the construction diagram of quoting design for utility boiler, Which is into the boiler sketch's construction and parameter characteristic. They are furnace construction, big screen superheater, high temperature superheater, low temperature superheater, high temperature reheater, low temperature reheater, economy coal implement, common use sign and standard sketch in boiler sketch, etc. According to demand of the quote design for utility boiler, the CAD environment of quoting system based on characteristic construction and parameter are developed. Total construction of this environment , developing characteristics and function of this system are given.     

新形势下如何实施种业名牌战略

浚县种子公司是全国种业五十强企业之一.多年来,公司坚持诚信为本、质量第一的理念,在科技创新、生产经营、质量管理等方面大力实施丰黎品牌战略,2004年丰黎牌小麦种子被河南省名牌战略推进委员会评选为河南省名牌农产品.     

Noise and Interference in Two Way CATV

The funneling effect of noise is the main difficulty in two way CATV modification works. This paper discusses the source of noise and interference, the mechanism to form noise funneling, the regularities of distribution, the characteristics of the spectrum, etc. The purpose is to find the way of reducing funnel noise. The invading noise has the greatest effect on the upstream of two way CATV system, which mainly comes from the indoor of the users. The increase of the number of cable modem will not obviously make greater funneling noise. The cable connectors are the main source of producing and invading noise in outdoor cable network, which is a threat to the safty of the whole upstream channel.     

Penetration behavior of bath induced by top-blown gas jets for steelmaking converter

The cavity induced by top-blow gas jets impinging on the bath surface is one of most important parameters, which has overwhelming influence on the rate of slag formation and metallurgical performance. Water model experiments are conducted through a 1/10 scaled-down top-blown convertor. Effects of lance height and gas flow rate on penetration behavior are studied, and also the influence mechanism of liquid surface tension on penetration depth is addressed based on the experiments and theory analysis. An energy utilization index (EUI) is defined to reflect how much the impinging kinetic energy of gas jets are transferred into bath for formation of cavity, and an improved model is proposed to predict penetration depth of jets. The results show that penetration depth increases with lowering lance height and increasing gas flow rate, and impact diameter increases with increasing lance height, but is little affected by gas flow rate. Influence of liquid surface tension on penetration depth is enhanced with increasing surface tension and penetration depth. The EUI increases with increasing lance height, and a function relationship of it with lance height is obtained based on the experiments.     

地下热水的来源与补给机制分析——以重庆北温泉为例

地下热水的来源研究对地下热水资源量评价和可持续开发利用有重要意义。选取重庆市北温泉作为研究对象,采用水化学分析、D、O同位素以及实时在线监测对其热水来源进行了研究。研究认为：重庆市北温泉泉水为中-低温浅层中性地热水,水化学类型为SO4-Ca型,地下热水的δ 18O值为-8.48‰～-7.09‰,δD值为-55.46‰～-53.26‰,其补给来源为雨水,补给高程为海拔641～1 206 m的岩溶出露区。安装马歇尔槽和CDTP300高分辨率实时在线监测发现：1)地下热水水文地球化学特征在长时间内稳定,体现了稳定的水-岩作用过程;2)北温泉的流量与研究区降雨量呈现出以半年为单位的滞后,雨季偏低,旱季偏高;当场降雨后20 d左右,温泉水的水温和电导率微降,水量增加。地下热水的来源为大气降水,其补给除了长时间长距离的含水层稳定补给外,热水上升过程中受地表水和浅层地下水的补给。     

A Study of the Vertical Vibration of the 4200 Thick Plate Rolling Mills

In this paper,the mill stand and the rolled piece were studied as a system. Based on the disoreted masses and the deformation of bending curve of the roller and roll housing, according to Rayleigh method,the equivalent mass and and the equivalent stiffness of the mode were solved,and set up a multiple degree of freedom vibration dynamic model. And also did theoretical analysis and calculation with an exapmle of the 4200 thick plate rolling mills.     

Model of Information Integrating in CIMS Based on the Object-oriented Method

Information integrating is the most important key to CIMS,which is the base of the function integrating and all others.Because of so many kinds,so complicated structure,so many different sources and uses that the information in CIMS has,it is necessary to build a popular Information Integrating Model. The model of information integrating in the thesis bases on the enterprise model,which is presented by ISO(International Organization for Standardization).According to the object-oriented method,the process of modeling begins with classifying the information,and then describes the definition of the attributes and the structural relation of those objects. By means of the idea of Encapsulation and Inheritance,the destination of information integrating can be arrive and the model of information integrating can be set up. The model which is based on the share information is helpful to finish the function integrating and the whole CIMS' construction. Moreover,the system which is developed following such program can be reused for many times and the developing circle of CIMS can be apparently shortened,too.