Removal of Fluoride from Water by Locally Available Sand Modified with a Coating of Iron Oxides

Locally available low-cost material viz. sand from the Kaliani river of Kanaighat area of Golaghat district Assam, India, was collected. The sand was fractionated and the different fractions were characterized by classical chemical analysis, powder XRD, SEM-EDXA, DTA-TGA, and by FT-IR. The chemical analysis of the size fraction of a 600–850-μm range gave more than 90% silica. This fractionated portion was modified by coating with iron oxide. Coating was carried out on the washed and separated sand by repeated treatment of Fe(NO₃)₃ at 110 and 600 °C, respectively. From FESEM analysis, formation of iron oxide coating over sand surface is clearly observed. The coated sand was used to remove toxic fluoride ion from the drinking water. Iron oxide-coated sand shows highly improved fluoride removal capacity compared to raw sand. The defluoridation capacity of coated sands rose up to 89% from 7% in uncoated raw sand. The effects of different parameters like adsorbent dose, contact time, temperature, initial fluoride concentration, and pH and the effects of different anions present in water along with arsenic on defluoridation capacity of the material were studied in a batch mode.     

Titanium Dioxide Nanoparticle Circulation in an Aquatic Ecosystem

Nanotechnology is a dynamically developing field of scientific and industrial interest across the entire world, and the commercialization of nanoparticles (NPs) is rapidly expanding. Incorporation of nanotechnologies into a range of manufactured goods results in increasing concern regarding the subsequent release of engineered NPs into the environment. One of the biggest threats of using NPs is the transfer and magnification of these particles in the trophic chain. The aim of the studies was the evaluation of the distribution of TiO₂ NP contamination in the aquatic ecosystem under laboratory conditions. Bioaccumulation of TiO₂ NPs by plants (Elodea canadensis) and fish (Danio rerio) in the source of contamination was investigated. The studies were focused on the consequences of short-term water contamination with TiO₂ NPs and the secondary contamination of the components of the investigated model ecosystem (plants, sediments). It was found that in the fish and the plants exposed to NP contamination, the amount of Ti was higher than in the control, indicating an effective bioaccumulation of NPs or ions originating from NPs. It was clearly shown that the NPs present in the sediments are available to plants and fish. Additionally, the aquatic plants, an important trophic level in the food chain, can accumulate NPs and be a source of NPs for higher organisms. It was concluded that even an incidental contamination of water by NPs may result in long-term consequences induced by the release of NPs.     

Photocatalytic Degradation of Emerging Contaminants: Artificial Sweeteners

Artificial sweeteners are food additives widely used, mainly in reduced sugar or sugar-free foods and beverages. Acesulfame potassium (ACE-K) and sodium saccharin (SAC) are among the most widely consumed sweeteners worldwide. These compounds when ingested are not metabolized by the body, being excreted unchanged. They arrive at treatment plants, where they are partially degraded and consequently released directly into water bodies. For this reason, artificial sweeteners have been detected in the most diverse aquatic environments, being recognized as emerging contaminants. In this work, aqueous solutions of ACE-K and SAC, submitted to heterogeneous photocatalysis (TiO₂/UV-A) for 60 min, showed degradations of more than 99% and maximum mineralization of 57% for ACE-K and 49% for SAC. The effects of certain variables were evaluated, with pH having a greater influence on the degradation of acesulfame and the mass of semiconductor on that of saccharin. The degradation of ACE-K and SAC followed a pseudo-first-order kinetic model according to the Langmuir–Hinshelwood model. Assays using Artemia salina as the test organism demonstrated the low toxicity of the photocatalyzed solutions of ACE-K and SAC. The contribution of different reactive species to the photocatalysis was investigated using specific radical inhibitors; the results indicate that singlet oxygen (¹O₂) has a fundamental role in the photocatalytic degradation of ACE-K and SAC.

Open image in new window

Graphical Abstract ?

     

Development of a Chemosensor for the In Situ Monitoring of Thallium in the Water Network

Thallium is an emerging contaminant, which can be retained in scale encrustation within the pipeline and then released to drinking water. It is included in the Priority Pollutant List of the U.S. EPA. In this study, a sample from the water pipeline of Pietrasanta (Italy), affected by the contamination of thallium, is characterized by SEM-EDS, TGA, and FT-IR. Fluorescence spectroscopy is then proposed as the optimal technique for the detection of the contaminant. The functionality of a previously reported fluorescent calix[4]arene-based chemosensor is verified first on a standard solution of thallium nitrate and then on the sample under investigation. The quenching of the fluorescence of the sensor during the complexation of thallium is confirmed, identifying an ON-OFF sensor with high sensitivity, able to detect concentrations as low as 10^?6 M and with high potential of development for the in situ and fast monitoring of the pollutant in the water network.     

The Relationship Study of Biomass,Situation, and Artificial Control: the Degradation of NP Using Estuary-Derived Fungi

Cultural situation generally played a crucial role on biodegradation mechanism establishment of pollutant. Extensive studies had focused on the optimization of cultivation environment based on in situ conditions. However, there were still few reports on the effects of artificial control on microbial growth and degradation. In this work, the relationship of biomass, situation, and artificial control was explored through the biodegradation of nonylphenols as standard containments by four trains named A. niger, A. terreus SHPP01, A. terreus NIH2624, and T. aff. harzianum from the estuary sediment of Jiaozhou Bay. Various culture conditions covering mineral salt medium, glucose synergistic medium, and carbon rich complex medium had been used to quest the relationship. As a conclusion, different strains usually showed different mechanisms within the same media. The correlation ship between biomass and degradation and removal rate was positive, and the natural medium was usually the best choice for microbial study in situ simulation. Hence, our study provided a valuable reference for the realization of more efficient and rapid biodegradation of pollutants.     

Benzophenone-3 Removal Using Heterogeneous Photocatalysis at Pilot Scale

This paper presents the main results obtained using the heterogeneous photocatalysis with TiO₂ technology in the removal of the emerging contaminant benzophenone-3 at pilot plant scale in a cylinder parabolic solar collector. In this sense, the effects of the operational parameters, pH and catalyst concentration, were analyzed, and after the use of the response surface methodology, the conditions that, under the experimental range, conduct to a higher removal of the analyte were selected. Additionally, analysis of the total organic carbon content and the biodegradability index (relationship between BDO₅ and COD) of the treated samples were carried out. In general, results allowed us to infer that this kind of treatment is effective in removing a considerable percentage of the substrate, and that it could become an effective alternative to water treatment and decontamination.     

Coagulation Behavior and Floc Properties of Dosing Different Alkaline Neutralizers into the Fenton Oxidation Effluent

Neutralization is the necessary operation to ensure the Fenton effluent pH. In situ coagulation can be induced during neutralization. In this study, three types of alkaline neutralizers (Ca(OH)₂, NaOH, and Ca(OH)₂?+?NaOH) were added into the Fenton oxidized PSE to control the effluent pH of 6 to 9. The coagulation behavior, floc structure, and properties were investigated. The results indicated that the coagulation with the adding of three neutralizers can remove 9.68 to 24.02% of the TOC. Ca(OH)₂ exhibited the highest TOC removal efficiency at the dosage of 0.4 g/L. Charge neutralization ability was in the following order: Ca(OH)₂?>?Ca(OH)₂?+?NaOH?>?NaOH. Ca(OH)₂ and Ca(OH)₂?+?NaOH showed the increase of floc growth rate with the increase of agent dosage, especially for Ca(OH)₂?+?NaOH. Moreover, D_f of NaOH flocs was higher than that of Ca(OH)₂ and Ca(OH)₂?+?NaOH, indicating the floc formed by NaOH was more compact than that of Ca(OH)₂. The main coagulation process of three neutralizers was different, and it was also affected by the agent dosage (or pH). When the dosage was 0.35 g/L (pH 6–7.5), the complexation, adsorption, and bridging were the predominant processes while charge neutralization gradually became the main coagulation process for Ca(OH)₂ and Ca(OH)₂?+?NaOH with the increase of dosage (pH 7.5–9).     

Ecosystem services provided by heavy metal-contaminated soils in China

Purpose

Soils provide a variety of ecosystem services (ESs) that are crucial to food security, water security, energy security, climate change abatement, and biodiversity, especially in densely populated countries such as China. At present, China is facing great challenges from serious soil heavy metal (HM) contamination which has damaged soil ESs and soil security. In this paper, we evaluate the ESs that contaminated soils can potentially provide before and after remediation, and we explore the connections between these ESs and the achievement of soil security in China.

Materials and methods

After an introduction to the concepts of ESs and soil security and a review of the current status of soil HM contamination in China, the ESs that can potentially be provided by HM-contaminated soils are discussed. Finally, we discuss the current remediation status of HM-contaminated soils from the standpoint of optimizing the ability of these soils to provide ESs.

Results and discussion

The status of the provision of ESs by HM-contaminated soils of croplands, brownfields, and mining wastelands is described in detail. Contaminated cropland soils fail to provide provisioning (e.g., food production), cultural, and regulating services, while the regulating and supporting services of brownfield soils are greatly reduced. The ESs of mining wasteland soils have been severely damaged, resulting in a high potential for contamination of surrounding ecosystems. Recent soil remediation projects have demonstrated that the damaged ESs of HM-contaminated soils can be restored, which would enhance Chinese soil security. However, it has often been the case that only visible ESs (e.g., food production and vegetation cover) are addressed, while other less noticeable but important services (e.g., water quality and biodiversity) are neglected. Therefore, we propose a framework for the evaluation of ESs provided by HM-contaminated soils.

Conclusions

The ESs that could potentially be provided by HM-contaminated soils would help to achieve soil security in China, not only by improving food security, water security, and energy security but also by helping to protect soil biodiversity and abate global climate change. The ESs provided by HM-contaminated soils should be taken into account in soil policy and management systems as well as by the remediation industry.

     

Emulation Engines: Choice and Quantification of Uncertainty for Complex Hydrological Models

Complex, mechanistic hydrological models can be computationally expensive, have large numbers of input parameters, and generate multivariate output. Model emulators can be constructed to approximate these complex models with substantial computational savings, making activities such as sensitivity analysis, calibration and uncertainty analysis feasible. Success in the use of an emulator relies on it making accurate and precise predictions of the model output. However, it is often unclear what type of emulation approach will be suitable. We present a comparison of reduced-rank, multivariate emulators built upon different ‘emulation engines’ and apply them to the Australian Water Resource Assessment System model. We examine first-order and second-order approaches which focus on specifying the mean and covariance, respectively. We also introduce a nonparametric approach for quantifying the uncertainty associated with the emulated prediction where this has bounded support. Our results demonstrate that emulation engines based on second-order approaches, such as Gaussian processes, can be computationally burdensome and may be comparable in performance to computationally efficient, first-order methods such as random forests.Supplementary materials accompanying this paper appear online.