Initial shapes of stress-strain curve of wood specimen subjected to repeated combined compression and vibration stresses and the piezoelectric behavior

This study investigated the relationship between the initial shape of the stress (σ)-strain (ε) curve of a Chamaecyparis obtusa wood specimen subjected to repeated combined compression and vibration stresses at various angles between the fiber direction and load direction and the piezoelectric behavior. The main findings of the study are: (1) the σ-ε curve became convex initially, and then the stress was proportional to the strain. The σ-ε curve had almost the same shape during both loading and unloading. (2) The σ-piezoelectric voltage (P) curve was nonlinear, with a maximal point or cusp on the curve, which had almost the same shape during both loading and unloading, as was also observed for the σ-ε curve. (3) The plot of the first derivative of the stress [dσ/dε (= σ′)] against ε was nonlinear. The σ′-ε and P-ε curves at various angles were fairly similar. (4) The stress at the maximal point (or cusp) of the σ-P curve decreased with an increase in the angle between the fiber direction and load direction. The tendency of the stresses was very similar to that of Young’s modulus and compression strength calculated from Hook’s law and Hankinson’s law, respectively.     

The influences of boiling and drying treatments on the behaviors of tension wood with gelatinous layers in <Emphasis Type="Italic">Zelkova serrata</Emphasis>

This study examined how boiling and drying treatments influenced various physical properties of the tension wood with gelatinous fibers (G-fibers) of a 29-yearold Zelkova branch. By boiling treatment, tension wood with numerous G-fibers contracted considerably in the longitudinal direction and the longitudinal Young’s modulus decreased in spite of the water-saturated condition. The drying treatment caused green tension wood and boiled tension wood with numerous G-fibers to shrink longitudinally and increased their longitudinal Young’s moduli. These specific behaviors in tension wood were highly correlated with the proportion of G-fibers in a specimen and were probably caused by the microscopic behavior of cellulose microfibril (CMF) in the gelatinous layers (G-layers). The longitudinal shrinkage of tension wood due to drying suggests the existence of a hygro-sensible, noncrystalline region in the CMF, which is abundant in the G-layer. Furthermore, the noncrystalline region in the CMF softens during boiling treatment, resulting in the reduction of the longitudinal Young’s modulus in tension wood. The longitudinal contraction of tension wood with G-fibers by boiling might be caused by the tensile growth stress remaining in green G-layers. However, no changes were detected in the 004 d-spacing of cellulose crystal in tension wood from the boiling and drying treatments, regardless of the proportion of G-fibers.     

The effect of compression and incision on wood veneer and plywood physical and mechanical properties

ABSTRACT

Drying takes the largest share of energy in plywood production, and varying moisture content of veneers necessitates re-drying that often leads to over-dry veneers with deactivated surfaces, which may promote imperfect bonding. In order to decrease the drying time, reduce the need for re-drying of veneers, and improve the quality of plywood, birch and spruce veneers were subjected to pre-treatment by cold compression, incision, or a combination of the two. The effects of pre-treatment on the veneer and plywood quality were assessed by standard tests. Compression had a beneficial effect on water removal of the wettest veneers (spruce sapwood (SW) and birch), but some thickness reduction was observed in the veneers as well as the finished birch plywood. Compression led to thickness reduction of spruce veneers, but had no effect on SW plywood thickness likely due to higher viscoelasticity. Both compression and the combination of incising and compression levelled the moisture variation within the compressed stacks. Incision improved the modulus of elasticity of birch plywood, shear strength of SW plywood, and both bending and shear strengths of heartwood plywood. Higher surface pressure decreased the drying time of spruce SW in both plain compression and combined incision and compression pre-treatment.     

Salt distribution in response to optical stratification porosity and relative windspeed in a coastal forest in Niigata, Japan

Wind velocity, vertical stand structure and seasalt distribution were measured at various heights inside a plantation of coastal pine forest, with thinning and unthinning, to assess whether any relationships exist between the wind profile, stand structure and seasalt distribution in the coastal pine forest. The vertical stand structure, i.e., optical stratification porosity (OSP), which is defined as vertical distribution of the proportion of sky hemisphere not obscured by tree elements inside a forest stand, was determined for each height by computer analysis of digital images taken with a hemispherical lens. The distribution of OSP in the coastal forest follows the Lambert-Beer's law with absorbency coefficient (). The relative windspeed within canopy can be described using the exponential form with the attenuation coefficient (). The sea-salt was collected using salt gauze (a surgical dressing of loosely woven cotton) both inside and outside the coastal forest, and the distribution of sea-salt within canopy was also in accordance with an exponential function. The relationships among windspeed, OSP and sea-salt indicate that the distributions of both sea-salt and windspeed within canopy were very closely correlated with the distribution of OSP. A linear relationship between OSP and sea-salt has been found. Additionally, linear regression between coefficients and has been obtained as well. Based on these relationships between OSP, wind and sea-salt in the coastal forest, the sea-salt distribution and wind profile within the canopy of the coastal forest can be predicted according to OSP. These results may therefore be useful in analyzing the effects of sea-salt on vegetation and evaluating the filter functions of coastal forests.This revised version was published online in November 2005 with corrections to the Cover Date.     

Surface deterioration of wood-flour polypropylene composites by weathering trials

The market for wood-fiber plastic composites (WPCs) is expanding rapidly in many countries including Japan, where WPCs are mainly used for exterior products. In such applications, WPCs undergo undesirable color change, chalking, and shrinkage and swelling, and accordingly there is a need to better understand the mechanisms responsible for the weathering of WPC and develop methods of improving their weathering resistance. In this study, weatherability of WPC was assessed by natural and accelerated weathering trials. Discoloration (whitening) of WPC during exposure was caused by degradation of both wood and plastic. Darker color pigments as additives improved the color stability of WPC; however, chalking on the surfaces still occurred. The color stability of WPC was improved by application of exterior coatings. Preweathering of WPC (before coatings were applied) increased the absorption of coatings by the WPC and had a positive effect on the color stability and prevented chalking of the composites. Parts of this study were presented at the IUFRO XXII World Congress Meeting, Brisbane, August 2005 and the IAWPS 2005, Yokohama, November 2005     

Optimum planting density for Japanese oak (Quercus mongolica var.grosseserrata) based on spacing experiment with systematic design

A spacing experiment for Japanese oak (Quercus mongolica var.grosseserrata) with Nelder's design have been studied at the Kyushu University Forest in Hokkaido, since 1975. The oak seedlings were planted according to systematic spacings which were 20 levels varying gradually from 40,816 to 1,086 seedlings per hectare with concentric circular arcs (22 in number) and spokes (41 in number). In 1992 when the planted oak seedlings were 18-year-old, DBH, crown diameter, total height and clear length of the survival trees were measured. Based on the results obtained from analyzing the relationships between planting density and the mean values of each block, the optimum planting density should be 7,241 seedlings per hectare. The title is tentative translation from the original Japanese title by the authors of this paper.     

Genotypic effects on the variation of wood quality and growth traits in plantation forest made by cutting cultivars of Japanese cedar

We studied the effect of genotypes of planting stocks regarding the variation of the modulus of elasticity of tree trunks on standing trees (trunk-MOE), tree height (TH), and diameter at breast height (DBH) in a 19-year-old Japanese cedar plantation made with root cuttings. Trunk-MOE was assessed nondestructively using a tree-bending method. Genotypes of individual trees were detected using the random amplified polymorphic DNA (RAPD) technique. RAPD analysis revealed that the sampled plantation consisted of 14 genotypes. Genotypic effects on DBH and TH were unclear, and there was no significant difference among genotypes. This result indicated that an acquired variation should have more influence than an inherited variation on DBH and TH. For trunk-MOE, there were significant differences among the four largest genotypes at the 5% level. However the coefficient of variation in trunk-MOE of each genotype ranged from 7.5% to 26.8%. It seems reasonable to assume that the wide variation in trunk-MOE in a sampled plantation may depend on the environmental effect within a clone as well as on the genetic origin of clones. We therefore conclude that the use of multiple planting stocks from different cuttings for which the wood quality is unknown contributed strongly to the wide variation in trunk-MOE in the plantation of Japanese cedar.     

Mechanical behavior of the crystal lattice of natural cellulose in wood under repeated uniaxial tension stress in the fiber direction

This study investigated the relationship between the cellulose crystal lattice strain (crystalline region) and the macroscopic surface strain in specimens of Chamaecyparis obtusa wood under repeated uniaxial tension stress in the fiber direction. Changes in the strain of the crystal lattice were measured from the peak of (004) reflection using the transit X-ray method. The macroscopic surface strain of each specimen was measured with a strain gauge. In both loading and unloading, the surface strain changed linearly with changes in stress. However, crystal lattice strain was not linear but exhibited changes along a curve with changing stress. Under stressed conditions, the crystal lattice strain was always less than the surface strain, regardless of the frequency of repetition in the loading and unloading cycle. The ratio of the crystal lattice strain to the surface strain showed a negative correlation for stress in both loading and unloading. That is, the ratio decreased with increasing stress, and finally tend to converge to a specific value. The ratio (I/I ₀) between the diffracted intensity (I ₀) in the (004) plane in the unloaded condition and the diffracted intensity (I) in the (004) plane in the loaded condition tend to converge on a specific value with increasing frequency of repetition. When the substantial tension Young’s modulus of the wood in the longitudinal direction decreased, the ratio of the strain of the crystal lattice to the surface strain also decreased. Moreover, the ratio decreased with increasing microfibril angle of the specimen.     

Predicting individual stem volumes of sugi (Cryptomeria japonica D. Don) plantations in mountainous areas using small-footprint airborne LiDAR

This study investigated which predictor variables with respect to crown properties, derived from small-footprint airborne light detection and ranging (LiDAR) data, together with LiDAR-derived tree height, could be useful in regression models to predict individual stem volumes. Comparisons were also made of the sum of predicted stem volumes for LiDAR-detected trees using the best regression model with field-measured total stem volumes for all trees within stands. The study area was a 48-year-old sugi (Cryptomeria japonica D. Don) plantation in mountainous forest. The topographies of the three stands with different stand characteristics analyzed in this study were steep slope (mean slope ± SD; 37.6° ± 5.8°), gentle slope (15.6° ± 3.7°), and gentle yet rough terrain (16.8° ± 7.8°). In the regression analysis, field-measured stem volumes were regressed against each of the six LiDAR-derived predictor variables with respect to crown properties, such as crown area, volume, and form, together with LiDAR-derived tree height. The model with sunny crown mantle volume (SCV) had the smallest standard error of the estimate obtained from the regression model in each stand. The standard errors (m³) were 0.144, 0.171, and 0.181, corresponding to 23.9%, 21.0%, and 20.6% of the average field-measured stem volume for detected trees in each of these stands, respectively. Furthermore, the sum of the individual stem volumes, predicted by regression models with SCV for the detected trees, occupied 83%–91% of field-measured total stem volumes within each stand, although 69%–86% of the total number of trees were correctly detected by a segmentation procedure using LiDAR data.