Effect of ammonia and nitrite on vigour,survival rate,moulting rate of the blue swimming crab <Emphasis Type=Italic>Portunus pelagicus</Emphasis> zoea

The effects of ammonia and nitrite on vigour, survival rate, moulting rate of zoea of blue swimming crab, Portunus pelagicus, were studied. A total of five nitrite-N treatments (26.67, 53.34, 106.68, 213.36, 426.72 mg/l) and a control (no nitrite-N added) were set up for the acute nitrite-N toxicity experiment; a total of five ammonia-N treatments (8.43, 16.86, 33.72, 67.44, 134.88 mg/l) and a control (no ammonia-N added) were set up for the acute ammonia-N toxicity experiment. The results showed that the vigour, survival rate and moulting rate of zoea of the blue swimming crabs exposed to over 53.34 mg/l were significantly different (P < 0.05) from the control group. The zoea LC₅₀ values (mg/l) of nitrite-N were 179.47, 76.56, 66.70, 37.49, 25.01, 25.35, 25.34 mg/l for 24, 36, 48, 60, 72, 84, 96 h, respectively. The vigour, survival rate and moulting rate of zoea of the blue swimming crabs exposed to over 16.86 mg/l were significantly different (P < 0.05) from the control group. The zoea LC₅₀ values (mg/l) of ammonia-N were 51.04, 39.62, 38.72, 24.43, 16.90, 13.42, 11.16 mg/l for 24, 36, 48, 60, 72, 84, 96 h, respectively. The zoeae are highly sensitive to ammonia and nitrite, and the toxicity of ammonia and nitrite on Portunus pelagicus decrease with development of this crab.     

油松建筑材密度管理图的编制及其应用

针对建筑材目的油松人工林经营措施,探讨不同生长发育阶段油松人工林密度调控下蓄积变化,为森林可持续经营提供科学依据。对河北平泉阳坡中土、阴坡中土和阴坡厚土3种主要立地类型的全生命周期油松人工林编制密度管理图,得出培育小、中、大径级建筑材措施。结果表明:河北油松建筑材林的培育,阳坡中土培育小径材、阴坡中土和阴坡厚土培育中大径材,期间经过2~3次间伐以达到高效培育的目的。阳坡中土林分,初植密度3 000~3 300株/hm2,10年生间伐强度12%,15年生强度20%,25年生强度25%,主伐时树高级为9~11 m,培育小径材。阴坡中土林分,初植密度2 700~3 000株/hm2,9年生间伐强度25%,19年生强度30%,主伐时树高级为9~11 m,培育中径材;初植密度2 200~2 500株/hm2,9年生间伐强度20%,17年生强度25%,27年生强度30%,主伐时树高级为11~13 m,培育大径材。阴坡厚土林分,初植密度2 000~2 300株/hm2,7年生间伐强度20%,15年生强度30%,主伐时树高级为11~13 m,培育中径材;初植密度1 000~1 200株/hm2,7年生间伐强度20%,13年生强度20%,23年生强度25%,主伐时树高级为13~15 m,培育大径材。     

基于里程信息融合的株间锄草刀定位数据优化方法

为提高株间锄草刀定位精度、降低机器视觉受外界因素的影响,该文提出里程信息融合机器视觉的方法对锄刀定位数据进行优化。通过分析定位数据校正和视觉滞后补偿的原理,设计了模糊逻辑校正器,通过模糊规则将模糊校正系统简化为单输入单输出形式,采用Mamdani模糊推理方法获得视觉数据可信度决策表,将可信度作为加权值生成校正锄刀定位数据,并提出采用实时里程信息作为视觉滞后补偿量的方法,给出补偿公式。田间刀苗距优化静态试验表明,视觉刀苗距误差为9.88 mm,优化后刀苗距误差为6.06 mm;动态试验表明,视觉数据出错率为4.8%～6.6%,刀苗距变化曲线显示,优化方法可有效过滤视觉坏点或不稳定的数据点,将视觉滞后纳入衡量标准,不同车速下动态优化后刀苗距平均误差为5.30～7.08 mm,较优化前降低了25%左右。研究结果表明,锄草刀定位数据优化方法可有效提高机器视觉静态和动态获取刀苗距的精度。该研究为提高株间锄草技术的锄刀定位精度提供了参考。     

我国农业技术推广典型模式及其效应与创新

农业技术推广对农业的可持续发展具有重要的作用。现阶段我国存在政府主导型、农业科研教学单位主导型、农业龙头企业主导型和农村经济技术合作组织(NGO)主导型4种典型的农业技术推广模式,在总结我国农业技术推广面临的挑战的基础上,从农业技术推广主体、要素两方面进行了模式创新,并从社会力量协同、技术成果传递、推广要素结合和推广人员奖励4方面进行了农业技术推广机制创新,以促进我国的农业技术推广工作持续、健康发展。     

Numerical analysis of injection molding for the Syringe Barrel with optimum design and processing condition

The numerical analysis was performed to predict the potential problem, often occurring during the manufacturing process of the disposable medical device of a great volume. The cavity filling analyses were performed for the new design of the 3cc Syringe Barrel using polypropylene(PP1), and a new nucleated polypropylene(PP2) material for better clarity. These analyses have been performed for different processing conditions as well as various wall thickness designs for both materials. With the nucleated material, only the original wall thickness design has been studied at two different processing conditions for comparison purpose. This study was conducted to investigate the optimum part design and processing condition for two different materials. The most desirable design was selected with Design 3 for material utilization and reduced flow stresses by comparing the field results. The new nucleated polypropylene provided slightly better product quality and processing.     

对虾养殖中新生残饵耗氧动态及其规律的研究

本文根据实验模拟研究的结果，估算了由配合饵料和贻贝肉形成残饵后３６天时间内的耗氧量，并讨论了其耗氧动态和规律。残饵耗氧量的变化范围为４．０９～１７．６１ｇ／ｋｇ·ｄ。残饵耗氧曲线随残饵形成时间的不同而显著变化，且始终呈二次曲线衰减形式，在其演变过程中，该二次曲线方程的二次项系数由负数逐渐演变为正数，并最终接近于污染虾塘底质的耗氧曲线。配合饵料和贻贝肉的耗氧曲线变化形式相近，但程度上存在较大差异。另外，本文还初步探讨了残饵的耗氧高峰期，估算了残饵在虾塘底质总耗氧量中的作用。     

Susceptibility of eight Algerian olive cultivars to <Emphasis Type="Italic">Bactrocera oleae</Emphasis> infestation – a pomological and nutritional quality perspective

The olive fruit fly, Bactrocera oleae (Rossi), is the major olive pest in the Mediterranean Basin, being responsible for high losses in olive production. The objective of this work was to study the influence of B. oleae infestation on the pomological parameters and nutritive value (lipids, proteins, carbohydrates and ash) of eight olive cultivars (Abani, Aellah, Blanquette de Guelma, Chemlal, Ferkani, Limli, Rougette de Mitidja and Souidi) from Algeria. The results displayed different degrees of susceptibility of the studied cultivars to this pest. Fruit size (weight) and the Fruit weight / stone weight ratio are significantly correlated with the attack. The statistical treatment of the results (PCA and HAC) highlighted different behaviors from the cultivars, concerning the attack. There are some cultivars more susceptible, being the nutritional value also affected. The lipid and protein contents were positively correlated with the attack and the carbohydrates negatively, suggesting a careful choice by the B. oleae. Ovipositional preference of olive fruit fly females and the success of larval development in different olive cultivars are crucial to establishing new approaches in Integrated Pest Management (IPM) against this pest.