Electrical properties of graphene/waterborne polyurethane composite films

Graphene is classified as a carbon-based material. Structurally, graphene is made up of carbon-based two-dimensional atomic crystals and a one atom thick planar sheet of sp²-bonded carbon atoms. This sort of arrangement in graphene makes it a unique material with exceptional mechanical, physicochemical, thermal, electrical, optical, and biomedical properties. Methods for graphene-based fabric production mainly use graphene-based materials such as graphene (G), graphene oxide (GO), and reduced graphene oxide (rGO) coated on fabric or yarn. Waterborne polyurethane (WPU) is one of the most rapidly developing and active branches of polyurethane chemistry. More and more attention is being paid to graphene-coated fabrics owing to their low temperature flexibility, the presence of zero or very few VOCs (volatile organic compounds), water resistance, pH stability, superior solvent resistance, excellent weathering resistance, and desirable chemical and mechanical properties. It is used as a coating agent or adhesive for fibers, textiles, and leather. Also, graphene-containing materials have been used to enhance the properties of WPU. In this study, graphene/WPU composite solution and film was prepared to conduct basic research for developing electrical heating textiles which is not harmful to the human body, flexible and excellent in electrical properties. Graphene/WPU composite solutions were prepared with a graphene content of 0, 2, 4, 8, and 16 wt%, and graphene/WPU film was prepared with solution casting method. The graphene contents were analyzed for their surface morphology, electrical properties, and electrical heating properties.     

LED-UV grafting of vinylsulfone dyes onto photo-oxidized wool fabrics

Photografting coloration of wool was carried out under UV-LED irradiation at room temperature using aqueous vinylsulfone dye solution containing vinylsulfonic acid as a comonomer. UV-LED irradiation of the 395 nm emission is more energy efficient, less damaging to the dyes, and much safer to human eyes compared with polychromatic mercury UV lamps. However, in case of the UV-LED lamps, the wool needs to be photo-oxidized either by UV/ozone or polychromatic UV irradiation before the dye photografting. The surface treatments increased the sulfur and oxygen contents in the modified wool surfaces. While the optimally photografted wool fabrics under the UV-LED lamp yielded a K/S value of 9.9, the K/S of the grafted wool increased to 25.2 and 13.6 after the UV/Ozone or polychromatic UV preoxidation at UV energies of 10.6 J/cm² and 25 J/cm² respectively. The color fastness properties of the photografted fabrics were far better than with those of the conventionally reactive-dyed fabrics, implying that the high-molecular-weight photografted dyes seemed to be more durable than the low-molecular dyes.     

Properties of polymers as a nanoscale material for fibers in leather

Hyperbranched polymers, an innovative class of nano-polymers, could enhance the properties of fibers owning to their unique structures. In this study, the ester compound (HPAE) of 3-(bis(2-hydroxyethyl)amino)propionic acid and pentaerythritol was treated with undecylenic acid to obtain novel hyperbranched multiterminal alkenyl polymers (HPAE-UAs). The sizes of the HPAE-UAs could be controlled conveniently from 400 to 1300 nm by adjusting the capped fraction of the hydroxyl groups with undecylenic acids. The molecular structures of HPAE-UAs were characterized by means of FT-IR and ¹H-NMR. Then, the effect of the HPAE-UAs on the structures, thermal, and mechanical properties of the wet blue leather were investigated. TEM and SEM demonstrated that the spacing between fibers was enlarged. The thermogravimetric analysis showed that the residual volume of leather could reach up to 30.3 % at about 500 °C. Furthermore, the shrinkage temperature increased to 89.4 °C. It was found that the HPAE-UAs used in leather could improve the thermal performance, physical and mechanical properties. All of these results indicate that HPAE-UAs can be used as a fatliquor with retanning in leather process.     

Synthesis,characterization and ultrafiltration of reactive dyes. Application by exhaustion and/or ink-jet printing. IV.

Three new bis azo reactive dyes of different metallic salts (Na, K, Li) were synthesized. The synthesis was obtained by diazotization of 4-amino-2:5 di methoxy phenylene-beta hydroxyl ethyl sulphone sulphate ester and coupling with 1-amino-8-hydroxynaphthalene-3,6-disulfonic acid (H-acid) (moles ratio 2:1). The dyes were purified-concentrated by ultrafiltration technology, characterized and applied on cotton, wool and nylon 6,6 fabric by exhaustion (dyeing) and by ink-jet printing. Fastness properties of the dyeings were measured. Wash fastness was investigated according to international standard methods and was found to be very good to excellent in all cases, while light fastness values were medium to low. Ink-jet ink formulations were prepared using the ultra filtrated reactive blue dyes UF RB(a-c) and their properties pH, conductivity, surface tension and viscosity were monitored over a period of 90 days. The inks were used to print digitally cotton and nylon 6,6 samples and wash- and light fastness properties of the prints were measured. Wash fastness properties were excellent while light fastness values are low Colour measurements of the dyeings and prints were conducted.     

Mechanical behavior of nylon 66 tyre cord under monotonic and cyclic extension: Experiments and constitutive modeling

Many industrial products are made of cord-rubber composite materials. Their mechanical behavior not only depends on rubber but also depends on cord. Nylon 66 cord is one of the most important reinforcement in these products. This paper research the mechanical behavior of nylon 66 cord under various load cases. A series of experiments were carried out to obtaining stress-strain curves under different load cases. Complex changes of the modulus and Mullins effect can be found in monotonic and cyclic tension, respectively. Mechanism of these behaviors has been analyzed considering both the twisted structure and material. A phenomenological constitutive model, accounting for different loading conditions, has been firstly proposed base on strain energy density function and damage mechanics method. The proposed model has been verified by comparing the predicted results with experimental data. It has been found that the proposed model predicted the stress-strain curves that were consistent with the experimental data. The proposed model can be implemented in finite element software for engineering design and application.     

Improvement of ink-jet printing performances using β-cyclodextrin forming inclusion complex on cotton fabric

Cotton fabric was modified with β-cyclodextrin (β-CD) forming inclusion complex to yield color strength, pattern sharpness, and color fastness for ink-jet printing. The modified cotton fabric was confirmed with the presence of new strong absorption peaks around 1713 cm^-1 and 1243 cm^-1 in FT-IR. β-CD had been covalently grafted on cotton fabric via the esterification reaction of citric acid (CTR) with cellulose and β-CD. The results indicated that printing performances of the ink-jet printed fabric were enhanced through β-CD modification. The K/S value was enhanced from 4.21 to 6.72, the width of printed line was decreased from 1.48 mm to 1.25 mm, and the color fastness was improved to 3-4 level. These improvements were due to the truncated cone structure of β-CD, which can form inclusions with water-based pigment. Meanwhile, the crease recovery performance was also improved with the aid of CTR. A comparison between the unmodified and modified cotton fabric suggested that the crease recovery angle of β-CD modified cotton fabric was increased by 25.0 % in the warp direction. Therefore, printing performance and crease recovery performance of β-CD modified and water-based pigment printed cotton fabric were enhanced remarkably.     

Characterization,Pathogenicity and Chemical Control of <Emphasis Type="Italic">Streptomyces acidiscabies</Emphasis> Associated to Potato Common Scab

The pathogenicity of 10 bacterial isolates was investigated on potato, radish, carrot and beet, including sensitivity and pathogen control efficacy. The isolates were identified by morphological, biochemical and molecular methods. All isolates were pathogenic on radish, carrot, and beet, and were highly virulent on potato. Although the isolates were obtained from different locations in the El Fuerte Valley (Sinaloa, Mexico), they were similar in their morphological, physiological and biochemical characteristics. Sequences of the 16S rRNA gene obtained by PCR were identical for all isolates. These results indicate that the bacterial isolates from potato scabby tissue belong to S. acidiscabies. Furthermore, the effectiveness of fluazinam, both in vitro and under greenhouse and field conditions, represents a possibleoption for chemical control of potato common scab disease. While our results suggest that spraying at seeding is effective in controlling common scab, future studies to combine this treatment with seed dressing before planting will be conducted to determine if there is an increase in disease control.     

How Long can Rogued Potato Plants Left in the Field Be a Source of <Emphasis Type="Italic">Potato Virus Y</Emphasis> for Aphids?

Removal of diseased plants (roguing) is commonly practiced in seed potato production. Diseased plants left to desiccate in fields could possibly serve as sources of Potato virus Y (PVY). PVY acquisition by three aphid species (Myzus persicae, Rhopalosiphum padi, Aphis fabae) was evaluated with leaflets from rogued plants for seven days. Results showed greater PVY acquisition rates in non-colonizing aphids species compared to colonizing ones. The proportion of aphids leaving leaflets increased with time (i.e. days after plants were uprooted) and some aphids were carrying PVY in their stylets on each of the seven days of the experiment, suggesting that aphids were able to probe and acquire PVY even when plants wilted. These results confirmed that diseased plants left in fields can serve as a source of PVY for aphids even after they wilted and emphasises that proper actions must be taken to efficiently remove diseased plants from fields.     

Effectiveness of Combined Use of Mineral Oil and Insecticide Spray in Reducing <Emphasis Type="Italic">Potato Virus Y</Emphasis> (PVY) Spread under Field Conditions in New Brunswick,Canada

In the 2014 and 2015 crop seasons, the efficacies of different types, rates and combinations of mineral oil and insecticide foliar sprays for reducing Potato virus Y (PVY) spread were tested in controlled field trials in New Brunswick (NB), Canada. Experimental plots were planted with certified PVY-free Goldrush, supplemented with known virus-infected seed to raise PVY inoculum to 2.3% and 3% at the beginning of the 2014 and 2015 seasons, respectively. Treatments consisted of mineral oil-only sprays at different application rates, insecticide-only sprays of differing numbers, and several combined mineral oil and insecticide spray regimes, all compared to a no-spray control treatment. PVY spread to 18% (2014) and 22% (2015) of initially virus-free plants in no-spray control plots, with significant reductions observed in PVY spread in several treatments. Greatest PVY reductions, as low as 4% (2014) and 12% (2015), were in combined mineral oil and insecticide spray treatments, followed by oil-only sprays; while insecticide-only sprays did not significantly reduce PVY spread. As well as measuring PVY spread to marked test plants and randomly collected post-harvest tuber sample from the plots, exhibited similar treatment pattern for PVY incidence. Multiple logistic regression modeling confirmed the relative efficacy of combined oil and insecticide sprays for reducing PVY spread, while accounting for variable inoculum and aphid factors. Modeling also highlighted the importance of planting low-PVY seed initially, and of early application of foliar sprays. Local best management practice recommendations for reduction of in-field PVY spread were discussed.     

Chloropicrin Soil Fumigation Reduces <Emphasis Type="Italic">Spongospora subterranea</Emphasis> Soil Inoculum Levels but Does Not Control Powdery Scab Disease on Roots and Tubers of Potato

The effect of chloropicrin fumigation on the soil populations of Spongospora subterranea and the development of powdery scab, formation of root galls and tuber yield was investigated in seven field trials conducted in Minnesota and North Dakota. Sixteen potato cultivars, with different levels of susceptibility to disease on roots and tubers, were planted in plots treated with chloropicrin at rates ranging from zero to 201.8 kg a.i. ha^?1. The amount of S. subterranea DNA in soil was determined using qPCR. Bioassays were conducted to further assess the effect of chloropicrin fumigation on root colonization by S. subterranea in two potato cultivars with contrasting disease susceptibility. In the field, chloropicrin applied at rates between 70.1 to 201.8 kg a.i. ha^?1 significantly decreased S. subterranea initial inoculum in soil but increased the amount of disease observed on roots and tubers of susceptible cultivars. The effect of increasing disease was confirmed in controlled conditions experiments. Although the amount of S. subterranea DNA in roots of bioassay plants increased with increasing chloropicrin rates, it remained similar among potato cultivars. Chloropicrin fumigation significantly increased tuber yield which in cultivars such as Shepody and Umatilla Russet were associated with the amount root galls (r = 0.30; P < 0.03). Results of these studies contradict earlier reports on the use of chloropicrin fumigation for the control of powdery scab. Factors other than inoculum level, such as environmental conditions that affect inoculum efficiency and host susceptibility, may be significant contributors to the development of powdery scab and root gall formation.